Subject of this work is pursuance technology of above-standard family house. This diploma thesis contains construction and technology report, technological prescriptions for important parts of buildings, technology report of plant building site, concepts of mechanical assembly, inspection and test plan, technology report of health and safety on the construction site. Budget, calculation and time planning, a drawing of the facilities of the construction site, description of transport relations is included in addendum. Work also contains part about use of Calcium silicate masonry and its comparation.

In my thesis I will deal with the draft project documentation for sport hotel. This object is located in the quiet southeastern part of Frydlant with city views and easy access to the nearby sports facilities. It is an object of part two storey and a basement. The building is set into the sloping terrain, so the underground floor extends on to the ground. The building is based on foundation walls and footings that are made of reinforced concrete. Load-bearing walls of the underground floors are designed as reinforced concrete. Ceiling structure of the building is made as reinforced concrete beam ceiling and in other structure parts as a crosswise reinforced concrete plate. Perimeter bearing walls and two floors, are designed from the acoustic sand-lime bricks Silk. External walls are warmed by a contact insulation system. Flat single shell roof was chosen over part of the restaurant. Double-layer roof with a supporting truss structures above the main part of the building. The building is divided into functional parts. Accommodation capacities are mostly on the second floor. On the ground floor there is a restaurant with a kitchen and space for staff. In the basement there is a functional part of the wellness and gym with common dressing rooms. The only entrance path allows convenient control of customers. The building is wheelchair accessible.

Diploma thesis designs a barrier free new building of medical devices – policlinic (health center) with 14 medical workplaces. Object has three floors and basement. The building is covered by a vegetation flat roof. Building of policlinic is based on strip foundations and load-bearing walls are made from sand-lime blocks. Horizontal systém is created like reinforced concrete ceiling and in the same way internal staircase. The building is design at passive architecture – have compact form, thick layer of insulation and airtight cover. The main glass facade is oriented to the sout. There is used heat recovery air conditioning and heat pumping for heating in building. Health center satisfy currently legislation.

The subject of this diploma thesis is the elaboration of a construction technological project for the construction of an administrative building with garages in Prague. The building is located in an enclosed area in the Prague-Veleslavín district. The main subject of this thesis is the elaboration of a technical report, a coordination situation of the construction with broader relations of transport routes, a time and financial plan of construction - object, a study of implementation of main technological stages of building, a project of the site equipment, a design of main construction machines and mechanisms, a time plan of main building, a plan of material resources, a technological regulation for the implementation of monolithic ceiling structures, a quality control and testing plan for monolithic ceiling structures. The diploma thesis also includes the calculation of construction according to THU, a occupational health and safety plan, concreting economics, a noise study, a selected points LEED certification and a budget with site equipment costs.

The subject of my diploma thesis is the solution of the construction of the Hotel Karpaty located near the town of Valašské Klobouky. The thesis contains an accompanying technical report, solution of transport routes, including traffic situation, time and financial plan of construction, study of implementation of main technological stages, construction site project with division into individual stages, drawing part and construction site report, design of main working machines and mechanisms, time hotel construction plan, plan for securing material resources, including budget and staff needs chart, technological regulation of monolithic ceiling structures, control and test plan for monolithic ceiling structures, design and installation of Schüco aluminum windows, design of construction measures Hotel Karpaty according to LEED standard.

This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.

The project solves a multifunctional Duma building in a vacant lot, contemplated the construction site is located in Carlsbad, in the street Vyhlíce. This is a protected site spa. Part of the project's layout and structural design of the house. It is a six-storey house with an attic and a basement floor. It is designed as a free-standing in the gap as the final house. The layout is divided into two complete units with their own input. There are spaces for business and residential units for permanent housing. Part of the living area are also room house equipment. Inputs to both parts are wheelchair accessible. The house is not wheelchair The house is designed as a brick building of brick masonry Porotherm the module dimensions of 250 (125) mm with reinforced concrete ceilings. Roofed by a hipped roof. The house is located on a private plot of 519 m2 built-up area of 221 m2. The land is gently sloping. The main orientation of the building to the cardinal's east and west. The south wall is adjacent to the neighboring house.

The diploma thesis elaborates the project documentation for the construction of a new apartment of central fire station type C1 with the administrative part of the Territorial Department. The fire station is technologically linked to the second building SO.02 the technical and technological background of the fire station. The building is situated on the eastern edge of Svitavy. The building is non-cellular, it has three floors and a flat green roof. Three floors fulfilling matter with mainly administrative function is connected with two floors blocks fire station with an indoor gym. Above the floor containing garages for emergency vehicles facilities for the emergency unit are placed with a curtain that creates fading of the emergency door. The matter of the gym is optically separated from the station and highlighted with a volume narrow neck and height elevation. In the station there are training places and places for general physical preparation. The buildings are located in a sloping terrain. The ground fire station has a heliport. The establishment supporting columns of the building are for made of prefabricated calyx, and are concreted into monolithic foundation pads. Infill wall vertical bearing and non-bearing structures are designed from clay blocks type THERM. The bearing system is reinforced concrete prefabricated frame. Horizontally bearing structures are designed from prestressed hollow core slabs. The building envelope is made of a curtain wall in dark grey and red combined with a light contact thermal insulation system used on the indoor gym. The envelopes are in the administrative part and the part of the station divided by a glazed area. In the workshops and technology room the envelope is divided by lamellae. Usually there are 13 firemen during one shift, in three shifts there work 39 firemen all together. There are supposed to be 17 employees in the administrative department.

The diploma thesis processes project documentation in the stage of construction for modernization of an apartment house near the center on the street Vlhká 22 in Brno. The building is divided into four residential floors and nonresidential basement and attic. On the first floor there are two residential units and the other four residential units. The foundation structures are made of solid bricks. The vertical load-bearing and non-load-bearing structures are also made of solid bricks. Exceptionally drywall partitions. In the basement, the ceiling structures are made of brick barrel vaults, above the above-ground floors there are wooden beamed ceilings. The roof structure of the building is made of purlin system with standing stool and covering of ceramic roof tiles. Three additional housing units will be built in the attic. In the basement, the masonry will be undercut by a chain saw, partly by pressure grouting and partly by a new layer with a waterproofing layer. All wood-beamed ceilings will be replaced with prefabricated ceiling beams with aerated concrete inserts without overhead slab. The garden part of the building will be insulated with mineral wool. The roof structure will be constructed from the street side as a shed roof and in the garden part a flat roof with a gradient layer of expanded polystyrene thermal insulation and a waterproofing layer of thermoplastic poleolefin.

The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors