The purpose of the thesis is the processing of project documentation fot the construction design of the Mixed-use building in the city of Brno, a borough of Židenice. Underground and first floor are made of cast-in-place concrete. The vertical load-bearing structures of the second, third and fourth floor are designed from ceramic bricks of 300 mm thickness. Floor slabs in the whole building are made of cast-in-place concrete. The last floor has warm flat green roof. The building is designed so that the underground floor is largely made up of underground garages, oriented to the west. Basement of the building is used for technical background of the building too. The first and second above-ground floors are intended primarily fot trade and services, where the all kinds of the offices of the first two above-ground floors makes up to 75% of the floor area. The third and fourth floors are used for housing. The building is oriented from east to west.

Subject of master´s thesis is an apartment building in Uhersky Brod. Subject is designed on a sloped site in central urban area of the city. Apartments are placed on three floors above the ground level, in underground floor is situated a garage. Vertical load-bearing structures in lower floors are made of monolithic reinforced concrete, upper floors are made of ceramic blocks HELUZ. Whole building is insulated with external thermal insulation composite system. Horizontal structures are made of monolithic reinforced concrete. Roof is partly mono-pitched, partly double-pitched truss roof.

The subject of my master's thesis is the design of an energy-efficient house for the elderly. The building has three floors. The construction system is made of ceramic blocks filled with glass wool. The building is covered with a flat vegetation roof. The retirement home has 15 apartments, a doctor's office, a common dining area, a common room and offices for administration. A technical concept for the building environment was designed for the building. The dining room, office, lounge and doctor's rooms are forcibly ventilated. The premises are divided into three zones and each zone has its own air handling unit. Heating is provided by two condensing gas boilers and the whole building is heated by radiators. An assessment was made for the design of photovoltaic panels. In the third part, an assessment and research of sources for heating and hot water was prepared.

The subject of this diploma thesis is the design of a new building in the center of Český Těšín - an accommodation and recreational facility called Penzion Noiva. The guesthouse will provide not only accommodation for up to 36 people, but also the wellness center and the restaurant. In terms of construction, it is a free-standing building with two above-ground floors, ground floor, basement and two terraces. On the ground floor there is a lounge, a restaurant and its facilities, the director's office and a hall with a reception adjacent to the main entrance. The main entrance to the building is oriented to the west, where there is also an entrance to the restaurant terrace. The first and second floors contain 14 double rooms and two four-bed suites with kitchenettes. The basement is divided into two parts. One part of the basement contains the wellness center with saunas and a relaxation room. The other part serves as a technical background of the building where there are locker rooms for the staff, storerooms, and air conditioning rooms. The access to the basement for the staff is provided by a side staircase and a lift for staff. All floors are connected by a main staircase with a lift. The building foundations are made of strip foundations. The external wall of the above-ground floors and ground floor is designed from Porotherm ceramic blocks. The basement external wall is built of concrete blocks. Porotherm ceramic blocks also form the internal loadbearing and non-loadbearing masonry. The floor structures are designed as cast-in-place reinforced slabs. The roofing of the building consists of a warm flat roof with a parapet wall, and the screed to fall is made of thermal insulation. The terrace is located on the part of the roof, which is designed as a green roof. Balconies with aluminum railings containing glass balustrade are designed from reinforced concrete slabs.

Diploma thesis „ Newly bulit apartment house“ deals with a proposal of block of flats in Veselí nad Lužnicí. The block of flats has got four storeys with no celler, and is in a rectangle shape. It is independently built house on a flat terrain. Bricked construction consists of ceramic constructuion blocks Heluz and reinforced concrete ceilings. The building is based on foundation belts and is roofed by a single-coat flat roof. There are 29 housing units designed in the building.

The subject of my diploma thesis is the design of the pension with the possibility of wellness activities, which is located in the village of Holásky, on the level of documentation for the construction. The new building is located in the cadastral area Holásky. It is a three-storey, basement building in the shape of two bounce rectangles with separate parking for visitors to the pension and wellness. The supporting system consists of a reinforced concrete skeletal column system with a ceiling structure made of Spiroll core panels. Porotherm ceramic blocks with contact insulated facade according to ETICS are used for filling masonry. The roof structure is a single-skin flat roof.

Diploma thesis is in form of building documentation for construction according to valid regulations. Designed mixed-use building is located in Zlín on plots no. 2865/3, 2865/22, 2865/23 and 2866. Building has shape of letter L, it has three above-ground floors and undergroud garage. Building has three separate parts – part with flats of sizes 3+kk and 4+kk, training centre and community centre. Each part has different number of above-ground floors. New building is detached house with maximum height 10,48 m. Object is constructed with ceramics blocks. It has ventilated facade and flat green roof. Ceiling is designed as cast-in-place reinforced slab. Material for foundations is waterproof concrete. Diploma thesis also includes assessment of thermal technology, acoustic and fire safety.

This diploma thesis depicts project documentation for realization of a mixed-use building in Hradec Králové. The designed object includes fifteen flats in four storeys, a café, a hairdressing salon and no cellar. Vertical load-bearing walls of the first storey are designed to be built of reinforced concrete. Vertical load-bearing walls of the other storeys are designed to be built of ceramic blocks. The outside wall is insulated with expanded facade polystyrene and plastered with a thin-layer textured cream plaster. The last storey has a ventilated facade made of fibre reinforced concrete panels. The openings are filled with plastic windows including an aluminium entrance door with a fanlight. Horizontal constructions are made of monolithic reinforced concrete panels which are reinforced in one dimension. The roofing in designed as a flat roof with a layer of vegetation. The foundations of the multifunctional house are based on concrete piles and a reinforced concrete slab. The design of the object respects current housing in the area. The diploma thesis includes a basic review of construction physics and fire safety layout.

The aim of this master project is to design an off-grid nearly-zero energy mountain guesthouse. First, the building structure is designed. It is a two-storeys building with roof made of lattice trusses. On first floor is dining room, kitchen, playroom and office. On second floor are guest rooms and an owner´s flat. The vertical load-bearing structures are designed from ceramic blocks. Horizontal load-bearing structures are designed from reinforced concrete monolithic slab. The building envelope is insulated with ETICS. Second, HVAC, lighting, photovoltaics and use of rainwater is designed. TZB system controlled remotely with a PC or cellphone are designed. Third, energy study is made. The project is developed using CAD (drawings), DEKsoft (thermal calculations) and Atrea Duplex (air conditioning design).

The subject of the diploma thesis is the design of a new building of a free-standing building for housing for the elderly, in the form of project documentation for the construction. The building is designed brick with monolithic reinforced concrete ceilings. Perimeter masonry is designed from ceramic brick blocks th. 300 mm supplemented by contact insulation system ETICS th. 200 mm, which will be provided with silicone plaster with a grain size of 1.5 mm. The internal load-bearing masonry is designed from acoustic ceramic brick blocks of thickness 250 and 300 mm. The partitions are designed from acoustic partitions. The ceilings are designed with a heavy floating floor with excellent acoustic properties. The roof above the two-storey part is designed as a single-skin flat with extensive greenery. Above the three-storey part is a hipped roof made of lattice trusses and sheet metal roofing. The windows are designed with plastic insulating triple glazing. The balcony railing is designed for aluminum with safety glass filling. The building is heated by a gas boiler and controlled ventilation is designed throughout the building using a central recuperation.