Diploma thesis describes the design and processing of project documentation of the multifunctional building. The multifunctional building is located in the central part of the town Náměšť nad Oslavou. The building has 4 floors. It is partly cellared building with flat roof and walkable terraces. This building is consisted of 2 functional parts, the first part is designed for living and the second one is designed for contact with the customer. There are shops and offices. The first floor is wheelchair accessible. In the basement there is a technical background of the building and cellars for housing units. In this multifunctional building we can find 13 residential units and five offices. All of the floors are connected with staircase and lift. The Carpark and the private garden with playground are also part of this residential area. This building is based on concrete blocks. Load-bearing, peripheral walls and connecting walls are made of ceramic blocks. A monolitic ceiling construction is the combination of the iron and the concrete. Two types of insulation are used in peripheral walls. The first one is called ETICS, external thermal insulation composite system, made of polystyrene. The second type of insulation is facade cladding system where the main insulation layer is made of mineral wool. The insulation layer is replaced by XPS polystyrene where facade is in contact with the ground. Facade cladding panels are made of cement and wood fibers called Cembrit.

This master's thesis focuses on design and elaboration of documentation for construction of a Car Showroom. The building is divided to two functional parts. The building is to be situated on plot number 1333/21, cadastre unit: Bohunice. The building is to be located on an undeveloped plot in possesion of the investor. The parking lots are connected to a local road. All substantial infrastructures are located nearby the plot. The proposition and the design of the building have respect for both commune plan and current buildings. The documentation is elaborated with regard to the contemporary Czech legislative and standards. The project designs the building, which is divided in two functional parts: SO 01 & SO 02, both operationally and visually connected. Contructions of objects are structurally independent. The first object includes exhibition hall with capacity of 8 exhibited cars. There is also to be located the administrative part, waiting rooms for customers, facilities for employees and the warehouse. The second object includes car repair shop. There are also to be located facilities for employees of the service, workshop, room for a car handover, hand car wash and an utility room. Construction is designed as a reinforced concrete columnar structural system with prefabricated single footings, self-supporting foundation slab and reinforced concrete ceiling slab with integrated girders above first floor of the object SO 01. The roofs of the building are designed as a flat roofs and the support constructions are made of steel. Planned dimensions of autosalon are 41x18 metres. As a cladding of the first object is used the lightweight glass cladding. For masonry walls are used the 250 mm thick ceramic blocks, mineral insulation and ventilated external facade cladding with use of fiber-cement boards. Planned dimensions of car repair shop are 31x28 metres. As a cladding of the second object are used the sandwich panels with foam core made of PIR.

The subject of my diploma thesis is a new-building of a municipal authority with a nursery school in Obora near Boskovice. The objects are statically and operationally separated from each other, but they formo ne unit. The building is located on the corner of the village in a flat terrain and thus forms the dominant feature of the village and a landmark. The target of the design was to create a building that will harmoniously connect to the surrounding buildings, public spaces and the school garden. The municipal authority has a rectangular floor plan, two-storey, basement, covered with a sloping roof, the building has a designed elevator. In the basement there are cellars of local associations, on the ground floor there is information center, a municipal library and on the first floor there is a municipal office with a registry office and a ceremonial hall. The attic can be used in the future for municipal apartments for rent. An official board with a public space is designed ahead of the municipal office. A photovoltaic power plant will be located on the roof of the municipal office. The nursery school has a trapezoidal floor plan, ground floor, no basement, covered with a vegetated flat roof. In the nursery school there is a children's day room with a storage room, storage of mattresses, teaching aids, food preparation, technical and hygienic facilities. The structural systém of both objects is longitudinal, wall. The underground part of the municipal office is designed in a white concrete tub system. The vertical load-bearing constructions are made from cut ceramic blocks. The horizontal constructions in the municipal office are monolithic, ferroconcrete, and in the nursery school they are prefabricated, ferroconcrete. The project was made in AutoCad software application, 3D model in 3D modelling computer program SketchUp.

The main aim of the thesis is to design a new building of the mixed-use building in Brno. The building consists of two parts. One part consists of shops. The second part consists of offices and conference space. It is a building that has three floors above ground and one underground. In the basement there are a facilities and a garage. Shops are designed on the ground floor. There are offices on the second floor. Conference rooms are on the third floor. The building has a flat roof. The vertical load-bearing structures are designed from Porotherm ceramic blocks. In the core of the building, the vertical load bearing structures are designed as monolithic reinforced concrete walls. Columns are used in the building for the possibility of open space. The masonry of the basement consists of white bathtub. The floors are designed as folded from the Spiroll system. Internal non-load-bearing walls are designed from gypsum board with double cladding. The second part of the work deals with forced ventilation, cooling and central heating. In the third part of the project I deal with acoustics. The project was carried out in the Auotocad program. All constructions comply with valid standards and regulations.