• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 46
  • 17
  • 7
  • 4
  • 3
  • 1
  • 1
  • 1
  • Tagged with
  • 94
  • 94
  • 20
  • 20
  • 17
  • 16
  • 15
  • 14
  • 12
  • 12
  • 11
  • 11
  • 9
  • 9
  • 8
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Chronic Impact Of Cerium Oxide Nanoparticles On Solanum Lycopersicum L. And Brassica Rapa L.

Wang, Qiang 01 August 2014 (has links)
Cerium Oxide Nanoparticles (CeO2-NPs) are commonly used in polishing, engine enhancement agents and many other commercial products. Increased applications and accidental release have raised concerns on the potential impact of CeO2-NPs on the environment. Most previous studies focused on the short term effect of CeO2-NPs. Information is severely lacking on the long-term impact of CeO2-NPs at environmentally relevant concentrations. The main goal of the current dissertation was to investigate the chronic phytotoxicity of CeO2-NPs on two plant species, tomato (Solanum lycopersicum L.) and Turnip mustard (Brassica rapa L.) fast growing variety, and the physiological and biochemical responses of these two plant species to CeO2-NPs. Four specific objectives were established. The first objective was to investigate the effects of combined CeO2-NPs and TiO2-NPs exposure on tomato plant growth and oxidative stress. The second objective was to investigate the impact of a lifecycle exposure to CeO2-NPs on wild type tomato growth and fruit yield and to evaluate the transgenerational effects of CeO2-NPs exposure on plant growth and the oxidative stress of the second generation tomato seedlings. The third objective was to compare the influence of CeO2-NPs and bulk CeO2 particles on plant growth and oxidative stress of standard fast growing Brassica rapa. The final objective was to evaluate the risks of CeO2-NPs exposure over three generations on Brassica plant growth, oxidative stress and reproduction. The results suggested that firstly, CeO2-NPs pre-exposure at concentrations of 4 and 40 mg/kg dry soil followed by 1000 mg/L of TiO2-NPs post-treatment increased H2O2 content and antioxidant proteins activities compared with CeO2-NPs alone and TiO2-NPs alone, and reduced biomass of the tomato plants compared with CeO2-NPs alone. Secondly, irrigation of CeO2-NPs at concentrations up to 10 mg/L stimulated wild type tomato plant growth, but exposure to CeO2-NPs over a lifecycle harmed plant growth and induced higher H2O2 content in tomato seedlings of the second generation. Thirdly, bulk CeO2 exposure at irrigation concentrations of 10, and 100 mg/L were more beneficial for Brassica rapa plant growth than CeO2-NPs at equivalent concentrations. CeO2-NPs irrigation at 10 and 100 mg/L increased H2O2 content and antioxidant proteins activities than bulk CeO2 at equivalent concentrations. However, the mustard plants treated by CeO2-NPs or bulk CeO2 showed changes of H2O2 content in different growth stages, which illustrated that CeO2-NPs and the bulk counterpart induced the change of H2O2 content differently. Finally, irrigating mustard plants with 10 to 1000 mg/L CeO2-NPs over three generations resulted in an inhibited plant growth, stronger oxidative stress, less seed yield and poorer reproduction of offspring plants. To our knowledge, this is the first report on the chronic (multigenerational) effects of CeO2-NPs on plant growth and oxidative stress of tomato and mustard plants grown in soil.
2

Colloidal Cerium Oxide Nanoparticle: Synthesis and Characterization Techniques

Clinton, Jamie C. 25 February 2008 (has links)
Fluorescence spectra and UV-Vis absorption spectra are collected on cerium oxide nanocrystalline particles. While CeO2 is the stable form of bulk cerium oxide, ceria nanoparticles exhibit a nonstoichiometric composition, CeO2-γ, due to the presence of oxygen vacancies and the formation of Ce2O3 at the grain boundaries. The Ce(III) ions, which are more reactive and therefore more desirable for various applications, are created by oxygen vacancies, which act as defects in the CeO2-γ crystal lattice. These defects form trap states in the band gap of CeO2, which can be seen in the absorption spectra. Ce(III) is required for fluorescence of the ceria nanoparticles while Ce(IV) is involved in only nonradiative transitions. The optical spectroscopy results show that the ceria samples have different ratios of Ce(III) ions to Ce(IV) ions, which is verified by x-ray photoemission spectroscopy (XPS). / Master of Science
3

Ceria based emission control catalysts

Daniell, Wayne January 1997 (has links)
No description available.
4

A microscopic study of the interaction between aliovalent dopants and native defects in group IV oxides : indium and cadmium in ceria and zirconia

Zacate, Matthew O. 11 March 1997 (has links)
In order to understand better the defect structure and dynamics associated with lower valent dopants complexed with native defects in group IV oxides, In/Cd perturbed angular correlation spectroscopy was performed in ceria and zirconia. Examining the orientation symmetry axis of defects in ceria single crystals at low temperature has allowed the identification of a cadmium with a bound near-neighbor oxygen-vacancy complex as well as a complex involving a cadmium with two opposing, near-neighbor oxygen vacancies. The orientation of the symmetry axis of a third complex is reported; however, this information is not sufficient to identify it. Complementing these low temperature studies, the dynamics of the cadmium/oxygen-vacancy interaction in zirconia at high temperatures was studied. The motion of the oxygen vacancy at high temperatures results in a damping of the PAC signal. This damping is not well characterized by the heuristic Marshall-Meares PAC fitting function, and a model is proposed to fit the data in terms of three physical parameters associated with the vacancy's motion. These parameters are the rate at which a bound oxygen vacancy hops among equivalent sites about the probe, the rate at which a bound vacancy detraps, and the rate at which a vacancy is trapped by cadmium. Fits of individual spectra using this model give respective activation energies of 0.3-0.6 eV, 0.9-1.6 eV, and 0.4-0.6 eV. The uncertainty in these energies can most likely be reduced by fitting spectra from multiple temperatures simultaneously. Despite the large uncertainty in the fitted energies, the values are physically reasonable and indicate that the model adequately describes the motion of the oxygen vacancy about cadmium. / Graduation date: 1997
5

Production of cerium oxide microsheres by an internal gelation sol-gel process

Wegener, Jeffrey J. 14 January 2010 (has links)
The experiments performed for this research were completed to produce solid cerium oxide microspheres by an internal gelation sol-gel process. The motivation for this work was to develop a process that would enable the fabrication of a storage or transmutation form for the plutonium and transuranics (TRU) from the Uranium Extraction Plus (UREX ) used fuel reprocessing process. This process is being investigated by the Department of Energy (DOE) and the Advanced Fuel Cycles Initiative (AFCI) through the Nuclear Energy Research Initiative. The internal gelation production of cerium oxide involves the combination of hexamethylenetetramine (HMTA), urea, and cerium nitrate solutions at ~100oC. Microspheres were produced by injection of a broth solution into a flowing stream of hot silicone oil. The captured microspheres were aged, washed, and then underwent Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), and XRay Diffraction (XRD) analysis. The process variables examined in this study include the concentrations of HMTA, urea and cerium nitrate, the process temperature, the postgelation aging time, and the product washing conditions. Over a series of 70 experiments, it was determined that a broth solution containing a mixture of 1.45 M cerium nitrate and 1.65 M HMTA and urea (1:1 ratio) solutions produced the best cerium oxide microspheres. The spheres were aged for 30 to 60 minutes and then washed in hexane to remove the silicone oil and a subsequent series of ammonium hydroxide washes to remove unreacted product and to fully gel the microspheres. Through DSC analysis it was determined that excess wash or unreacted product may be removed by an exothermic reaction at approximately 200oC. The XRD analysis of unheated spheres showed the presence of cerium oxide with additional cerium-bearing organics. Following heating, the microspheres were completely converted to cerium oxide.
6

INVESTIGATION OF THE MATERIAL PROPERTIES OF CERIUM OXIDE WITH DOPANTS FOR AN OXYGEN TRANSPORT MEMBRANE

Morrow, James 01 December 2017 (has links)
AN ABSTRACT OF THE THESIS OF James Morrow, for the Master of Science degree in Mechanical Engineering, presented on November 3, 2017, at Southern Illinois University Carbondale. TITLE: INVESTIGATION OF THE MATERIAL PROPERTIES OF CERIUM OXIDE WITH DOPANTS FOR AN OXYGEN TRANSPORT MEMBRANE MAJOR PROFESSOR: Dr. Kanchan Mondal Many physical properties of cerium oxide both undoped and doped have been studied herein. These properties include electrical conductivity, hardness, sintered density, and microstructure. These will be used to help determine a cerium oxide compound to use as an oxygen transport membrane in a combustion system. These compounds have been readily studied beforehand with exception to compounds with multiple dopants. Along with single doped cerium oxide, dual doped was investigated as well. The samples to be tested were created using co-precipitation and the subsequent powders were sintered at 1500°C to generate solid pellets. Once the pellets were formed the physical properties were tested. It was found that hardness and sintered density had little to no effect on electrical conductivity and the microstructures of the samples were shown to be favorable. As far as single or dual dopants were concerned, it was found that by including a second dopant along with zirconium that the electrical conductivity was reduced. Except for in the case where iron was doped along with zirconium, where the conductivity was increased. It was suggested to use samarium as the second dopant along with zirconium for the membrane.
7

Room Temperature Synthesis And Systematic Characterization Of Ultra-small Ceria Nanoparticles

Patel, Chetak 01 January 2009 (has links)
Cerium oxide (ceria, CeOâ‚‚) is a rare earth oxide that has attracted wide-spread research interest because of its unique properties such as high mechanical strength, oxygen ion conductivity, oxygen storage capacity and autocatalytic property. In recent years, researchers have discovered that ceria nanoparticles (NPs) are capable of protecting cells from free radical induced damage. Interestingly, it was found that nanometer size (~ 5 nm) ceria can scavenge free radicals quite efficiently, thus acting as an anti-oxidant. This phenomenon has been explained based on the autocatalytic property of ceria NPs. Several methods have been developed for the synthesis of ceria NPs that include flame combustion, hydroxide co-precipitation, hydrothermal/solvothermal, microemulsion, sonochemical and microwave-assisted heating methods and sol-gel method. Ceria NPs synthesized by these methods are often highly aggregated. Furthermore, large scale synthesis of monodispersed CeOâ‚‚ NPs is quite challenging. Therefore it is desirable to synthesize ceria NPs in bulk quantity keeping its important properties intact, specifically free-radical scavenging property. The main goal of this study is therefore to synthesize ultra-small ([less than]5.0 nm), high quality monodispersed ceria NPs in large quantities. In this thesis work, I present a couple of room temperature techniques, dilute sodium hydroxide (NaOH) assisted and ethylenediamine (EN) assisted for the synthesis of nearly mono-dispersed, ultra-small ( < 5 nm) and water-dispersible ceria NPs. Morphology and particle size of the ceria NPs were investigated through high resolution transmission electron microscopy (HRTEM). The HRTEM analysis confirmed the formation of 3.0 ± 0.5 nm size and 2.5 ± 0.2 nm size highlycrystalline ceria NPs when synthesized using dilute NaOH and EN as solvents, respectively. The nanostructures were characterized by X-ray diffraction (XRD) studies to determine the crystal structure and phase purity of the products. The samples were also thoroughly characterized by X-ray photoelectron spectroscopy (XPS) to determine the oxidation state of cerium ions. The presence of the +3 and +4 oxidation states in the samples was also confirmed from the XPS analysis. The co-existence of these two oxidation states is necessary for their applications as free radical scavenger. The autocatalytic behaviors of the ceria NPs were investigated through a hydrogen peroxide test and monitored by UV-visible transmission spectroscopy.
8

Probing Surface Chemistry at the Nanoscale Level

René-Boisneuf, Laetitia 30 November 2011 (has links)
Studies various nanostructured materials have gained considerable interest within the past several decades. This novel class of materials has opened up a new realm of possibilities, both for the fundamental comprehension of matter, but also for innovative applications. The size-dependent effect observed for these systems often lies in their interaction with the surrounding environment and understanding such interactions is the pivotal point for the investigations undertaken in this thesis. Three families of nanoparticles are analyzed: semiconductor quantum dots, metallic silver nanoparticles and rare-earth oxide nanomaterials. The radical scavenging ability of cerium oxide nanoparticles (CeO2) is quite controversial since they have been labeled as both oxidizing and antioxidant species for biological systems. Here, both aqueous and organic stabilized nanoparticles are examined in straightforward systems containing only one reactive oxygen species to ensure a controlled release. The apparent absence of their direct radical scavenging ability is demonstrated despite the ease at which CeO2 nanoparticles generate stable surface Ce3+ clusters, which is used to explain the redox activity of these nanomaterials. On the contrary, CeO2 nanoparticles are shown to have an indirect scavenging effect in Fenton reactions by annihilating the reactivity of Fe2+ salts. Cadmium selenide quantum dots (CdSe QD) constitute another highly appealing family of nanocolloids in part due to their tunable, size-dependent luminescence across the visible spectrum. The effect of elemental sulfur treatment is investigated to overcome one of the main drawbacks of CdSe QD: low fluorescence quantum yield. Herein, we report a constant and reproducible quantum yield of 15%. The effect of sulfur surface treatment is also assessed following the growth of a silica shell, as well as the response towards a solution quencher (4-amino-TEMPO). The sulfur treated QD is also tested for interaction with pyronin Y, a xanthene dye that offers potential energy and electron transfer applications with the QD. Interaction with the dye molecule is compared to results obtained with untreated quantum dots, as well as CdSe/ZnS core shell examples. In another chapter of this thesis, the catalytic potential of silver nanoparticles is addressed for the grafting of polyhydrosiloxane polymer chains with various alkoxy groups. A simple one-pot synthesis is presented with silver salts and the polymer. the latter serves as a mild reducing agent and a stabilizing ligand, once silver nanoparticles are formed in-situ. We evaluate the conversion of silane into silyl ethers groups with the addition of several alcohols, whether primary, secondary or tertiary, and report the yields of grafting under the mildest conditions: room temperature, under air and atmospheric pressure.
9

Probing Surface Chemistry at the Nanoscale Level

René-Boisneuf, Laetitia 30 November 2011 (has links)
Studies various nanostructured materials have gained considerable interest within the past several decades. This novel class of materials has opened up a new realm of possibilities, both for the fundamental comprehension of matter, but also for innovative applications. The size-dependent effect observed for these systems often lies in their interaction with the surrounding environment and understanding such interactions is the pivotal point for the investigations undertaken in this thesis. Three families of nanoparticles are analyzed: semiconductor quantum dots, metallic silver nanoparticles and rare-earth oxide nanomaterials. The radical scavenging ability of cerium oxide nanoparticles (CeO2) is quite controversial since they have been labeled as both oxidizing and antioxidant species for biological systems. Here, both aqueous and organic stabilized nanoparticles are examined in straightforward systems containing only one reactive oxygen species to ensure a controlled release. The apparent absence of their direct radical scavenging ability is demonstrated despite the ease at which CeO2 nanoparticles generate stable surface Ce3+ clusters, which is used to explain the redox activity of these nanomaterials. On the contrary, CeO2 nanoparticles are shown to have an indirect scavenging effect in Fenton reactions by annihilating the reactivity of Fe2+ salts. Cadmium selenide quantum dots (CdSe QD) constitute another highly appealing family of nanocolloids in part due to their tunable, size-dependent luminescence across the visible spectrum. The effect of elemental sulfur treatment is investigated to overcome one of the main drawbacks of CdSe QD: low fluorescence quantum yield. Herein, we report a constant and reproducible quantum yield of 15%. The effect of sulfur surface treatment is also assessed following the growth of a silica shell, as well as the response towards a solution quencher (4-amino-TEMPO). The sulfur treated QD is also tested for interaction with pyronin Y, a xanthene dye that offers potential energy and electron transfer applications with the QD. Interaction with the dye molecule is compared to results obtained with untreated quantum dots, as well as CdSe/ZnS core shell examples. In another chapter of this thesis, the catalytic potential of silver nanoparticles is addressed for the grafting of polyhydrosiloxane polymer chains with various alkoxy groups. A simple one-pot synthesis is presented with silver salts and the polymer. the latter serves as a mild reducing agent and a stabilizing ligand, once silver nanoparticles are formed in-situ. We evaluate the conversion of silane into silyl ethers groups with the addition of several alcohols, whether primary, secondary or tertiary, and report the yields of grafting under the mildest conditions: room temperature, under air and atmospheric pressure.
10

Probing Surface Chemistry at the Nanoscale Level

René-Boisneuf, Laetitia 30 November 2011 (has links)
Studies various nanostructured materials have gained considerable interest within the past several decades. This novel class of materials has opened up a new realm of possibilities, both for the fundamental comprehension of matter, but also for innovative applications. The size-dependent effect observed for these systems often lies in their interaction with the surrounding environment and understanding such interactions is the pivotal point for the investigations undertaken in this thesis. Three families of nanoparticles are analyzed: semiconductor quantum dots, metallic silver nanoparticles and rare-earth oxide nanomaterials. The radical scavenging ability of cerium oxide nanoparticles (CeO2) is quite controversial since they have been labeled as both oxidizing and antioxidant species for biological systems. Here, both aqueous and organic stabilized nanoparticles are examined in straightforward systems containing only one reactive oxygen species to ensure a controlled release. The apparent absence of their direct radical scavenging ability is demonstrated despite the ease at which CeO2 nanoparticles generate stable surface Ce3+ clusters, which is used to explain the redox activity of these nanomaterials. On the contrary, CeO2 nanoparticles are shown to have an indirect scavenging effect in Fenton reactions by annihilating the reactivity of Fe2+ salts. Cadmium selenide quantum dots (CdSe QD) constitute another highly appealing family of nanocolloids in part due to their tunable, size-dependent luminescence across the visible spectrum. The effect of elemental sulfur treatment is investigated to overcome one of the main drawbacks of CdSe QD: low fluorescence quantum yield. Herein, we report a constant and reproducible quantum yield of 15%. The effect of sulfur surface treatment is also assessed following the growth of a silica shell, as well as the response towards a solution quencher (4-amino-TEMPO). The sulfur treated QD is also tested for interaction with pyronin Y, a xanthene dye that offers potential energy and electron transfer applications with the QD. Interaction with the dye molecule is compared to results obtained with untreated quantum dots, as well as CdSe/ZnS core shell examples. In another chapter of this thesis, the catalytic potential of silver nanoparticles is addressed for the grafting of polyhydrosiloxane polymer chains with various alkoxy groups. A simple one-pot synthesis is presented with silver salts and the polymer. the latter serves as a mild reducing agent and a stabilizing ligand, once silver nanoparticles are formed in-situ. We evaluate the conversion of silane into silyl ethers groups with the addition of several alcohols, whether primary, secondary or tertiary, and report the yields of grafting under the mildest conditions: room temperature, under air and atmospheric pressure.

Page generated in 0.0665 seconds