Yes / The duration of most collar arrangements provided by governments to encourage early investment in infrastructure, renewable energy facilities, or other projects with social objectives are finite, not perpetual. We extend the previous literature on collar-style arrangements by providing an analytical solution for the idle and active values, as well as the investment triggers, for projects where collars are either finite-lived or retractable. What is the difference between these types of arrangements with their perpetual counterpart? Lots, including different vega signs, and substantially different values for different current price levels. Often, finite and retractable collars justify earlier investment timing than perpetual collars. In general, we demonstrate that the finite-lived and retractable versions have a significant impact on optimal behavior, relative to the perpetual case. An important consideration when negotiating the floors, ceilings, and duration (or signalling the expected duration) of a finite or a retractable collar is the current price level of the output and its expected volatility over the life of the contract. / Carried out within the funding with COMPETE reference n. POCI-01-0145-FEDER-006683 (Artur Rodrigues) and POCI-01-0145-FEDER-006890 (Paulo J. Pereira), FCT/MEC’s (Fundação para a Ciência e a Tecnologia, I.P.) financial support through national funding and by ERDF through the Operational Programme on Competitiveness and Internationalization - COMPETE 2020 under the PT2020 Partnership Agreement.

Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1993. / Vita. Abstract. Includes bibliographical references (leaves 73-76). Also available via the Internet.

No description available.

The purpose of this research was to investigate the fit of men's dress shirt collars among men 18 years and older and sized small to large. Fit was evaluated by the subject's response to a comfort scale based on physical comfort. Static fit (ease) was determined by subtracting the neck measurement from the collar measurement. Dynamic fit was determined by subtracting the ease for movement from the ease in the collar. Men from Virginia Tech and the vicinity of Blacksburg, Virginia were asked to participate. One hundred men volunteered for this study. The data analysis was conducted on 90 of the 100 surveys. Some surveys were eliminated due to incomplete information. Pearson Correlation Coefficient was used to determine if there was a positive correlation between ease and comfort. The data were analyzed with Analysis of Variance to determine if there were significant differences between age groups for perceived comfort or for ease. Analysis of Variance was used to determine if there were significant differences between size groups for perceived comfort, for ease for movement or for ease. Analysis of variance was also used to determine whether there were significant differences between age groups and size groups for comfort or for ease. The results of the study showed that 2.2% of the subjects did not have ease in static fit and 4.4% of the subjects did not have ease for movement in dynamic fit. There was a significant positive correlation between ease and comfort. There were significant differences between age groups for perceived comfort but not for ease; there were significant differences between size groups for ease but not for ease for movement or perceived comfort; and there were no significant differences between age groups and size groups for perceived comfort or for ease. Although the median value for ease for movement was 1/4 of an inch, 16 of the 90 men (17.8% ) had greater than 1 14 of an inch ease for movement. The results of the present study and Langan's study (1984) indicated that the tie may be the major contributor to neckwear tightness. / Master of Science

The purpose of this study was to examine and compare the flexibilities of three apparel production systems to variations in products manufactured on them. The production system used by a company was determined based on five system attributes (i.e., type of workflow, level of WIP inventory, number of tasks, mode of transportation between workstations, and level of interaction between operators). The product line of the company (i.e., staple, semi-staple, fashion, and high-fashion) was determined based on the number and type of collar designs manufactured by the company. Flexibility of a system was determined by the range of collar designs manufactured by the system. A stratified proportionate random sample of manufacturers producing men's and women's shirts and blouses was selected for the survey. The questionnaire was pilot tested for content validity and reliability. The adjusted response rate was 39% (n = 52). Non-parametric tests were performed to test the statistical significance of the hypothesized relationships. Three production systems (i.e., bundle system, progressive bundle system [PBS], and modular system) were compared for their volume of production. The size of the company (i.e., number of employees and the total volume of production) was compared between the three production systems. The five system attributes were found to be significantly related to the system used. The procedure adopted for determining the product line of the company was also found to be significant. The relationship between production systems and product lines was significant in some of the cases and not significant in others. PBS was found to be most flexible due to its ability to accommodate a greater style variation followed by bundle system and modular system. The relationship between production systems and the volume of production and also between the system and the size of the company were not significant. / Master of Science

Yes / River dynamics and sediment transport play an important role in river bed morphology. Building a bridge pier along the river alters the cross-section of the river and causes the change in flow processes. These changes are mainly responsible for pier scour. In this paper, the usage of collars to reduce scour around circular piers has been investigated. The collars with different diameters and depth positions have been studied using previous data and additional data collected in the present study to assess their effectiveness in reducing scour. Using a wide range of measured data, an empirical equation to compute the maximum scour depth around the circular piers in the presence of collars has been proposed. The proposed equation has been validated and proven to be applicable to a wide range of pier layouts. It has been found that the maximum efficiency can be achieved by fixing the collar at bed level and adopting a collar diameter 1.5–2.5 times of pier diameter.

The objectives of my research were twofold: 1) to evaluate new technologies (camera traps and a new type of GPS collar) for studying large mammals in tropical forests, and 2) to study the ecology of the lowland tapir (Tapirus terrestris) in the Peruvian Amazon. Camera traps proved to be an efficient tool for mammal inventories in tropical forests. They recorded 24 out of 28 terrestrial medium and large sized mammal species with a survey effort of 2340 camera days. Camera traps were also able to reveal important information on habitat use, activity patterns and the use of mineral licks for five Amazonian ungulate species. There was a high spatial overlap between all the species with the grey brocket deer being the only species that was restricted to terra firme forest. White-lipped peccaries, tapirs and red brocket deer frequently used mineral licks, whereas collared peccaries and grey brocket deer were hardly ever observed at licks. A new type of GPS collar (TrackTag) tested in this study performed well under the dense canopy of a tropical forest. Position success rates of 87% for stationary collars and 48% for collars placed on tapirs were comparable to data obtained with GPS collars in temperate forests. The mean location error for stationary collars inside the forest was 28.9 m and the 95% error was 76.8 m. GPS collars placed on six tapirs for seven to 182 days showed home range sizes of 102 to 386 hectares. Tapirs were mainly nocturnal and areas used for foraging during the night differed from resting sites used during the day. Tapirs could walk up to 10 km to visit a mineral lick. Visits were irregular at intervals of a few days up to 36 days. The analysis of 135 tapir dung samples showed that tapirs ingest seeds of over 120 plant species. Seeds were found throughout the year but monthly species diversity was related to fruit availability. The size distribution of ingested seeds was related to availability. Most seeds were less then 10 mm wide, but seeds up to 25 mm were found. Both camera traps and TrackTag GPS collars greatly increased the possibilities for studying large rainforest mammals. The two technologies collect complementary information and each one is suited for a different set of questions.

The main purpose of this research is to study the impact of the empowerment Job Design (JD) techniques on the satisfaction of the blue-collars’ motivational needs in the context of assembly line system in the automotive industry. We have developed this purpose aiming to make a theoretical contribution due to the fact that only a few studies were developed and were linked to the empowerment model developed by Conger and Kanungo (1988) which is a JD model relevant for the context of assembly line work which is qualified as repetitive and monotone. To fulfil this gap, we have established a conceptual model based on the empowerment model developed by Conger and Kanungo (1988) and theories of motivational needs. We conducted our thesis with the following research question as guideline: What are the effects of the empowerment job design on the satisfaction of the blue-collars’ motivational needs in an automotive assembly line system context? Our objective of this research question was: to study the impact of the empowerment Job Design techniques on the blue-collars’ motivational needs thanks to a case study as research design. This research is made independently to the effects of the context on the blue-collar’s motivation. We have conducted a quantitative study from a positivist and objectivist perspective in two MB (Mercedes-Benz) factories: ELC Étoile du Rhône in France (sample part factory) and Rastatt MB (engine factory) in Germany. Also, we have made questionnaires to distribute these to the blue-collars located in these two MB factories which allowed us to get 67 respondents. The set of 15 questions that constitutes our questionnaire dealt with how the empowerment JD techniques affect their motivational needs. Once the data were collected, we used SPSS for statistical analysis. We retrieved some specific analysis such as descriptive statistics, correlations and regressions. In addition to that, we used Cronbach’s Alpha to test the reliability of our results. We measured the impacts of the empowerment JD techniques (participative management, feedback, modelling contingent/ competence based reward, goal setting and job enrichment) on the motivational needs (existence needs, relation-oriented needs and growth-oriented needs). The results of our findings definitely went in the way that the empowerment JD techniques have a positive impact on the satisfaction of the blue-collars’ motivational needs. Indeed, our analysis indicated positive correlations of all of the empowerment JD techniques on the motivational needs except the JD technique "modelling contingent/ competence based reward". Also, we found that the impacts on the relation-oriented needs (RN) were the strongest ones. Thus, we hope that this paper will help the assembly line managers to become aware of their blue-collars’ potential in order to increase their performance and to improve their employees job satisfaction.

The objective of this thesis was to examine whether forest structure and ground vegetation could explain the habitat choices of the reindeer within similar forest stands. The field work was carried out on 60 sites scattered across a part of the winter grounds for Vilhelmina Norra reindeer herding district. All sites were situated within so-called core and key areas, i.e. areas which the herding district sees as necessary for the reindeer husbandry in the area. Information from GPS-collared reindeer were used to create RIVO (by the Reindeer Identified [as] Important Areas) maps, where areas the reindeer preferred were shown. The results showed that the core and key areas were not significantly different from each other regarding the forest structure, nor the vegetation, but there were some differences in terms of the habitat choice of the reindeer and when the core and key areas were combined with RIVO. The differences concern mainly the coverage of ground lichens, epiphytic lichens and moose presence. Results from other studies suggest that the reindeer habitat selection is dependent on the weather and snow conditions, and looks very different from year to year. The snow conditions are in turn affected by the forest structure, so it is important that the grazing grounds have a heterogeneous forest landscape, including areas which under normal circumstances would not be seen as important for the reindeer husbandry.

Knowledge of scale-dependent factors that affect the distribution of ungulate herds, such as cattle, is essential for the development of more accurate predictive models of animal movement and the management of sustainable agriculture. Our objectives were to evaluate the seasonal and diurnal patterns of herd spread, explore grouping dynamics, and the influence of dominance ranks, seasonal changes in forage biomass, use of shade, water and supplemental feed areas on cattle distribution. Positional and activity information of eleven free-ranging Bonsmara, Bos taurus, cows were obtained at five minute intervals using Global Positioning System collars. We conducted a total of 12 trials each of three weeks from August 2007 to August 2009 in a 457ha shrub-dominated savanna in South Texas. Spread was obtained by calculating the average Euclidean distance of individuals to the center of the herd. The association software package, ASSOC1, was used to analyze spatio-temporal interactions. Normalized Difference Vegetation Index, an indicator of available forage biomass, was calculated using satellite imagery. Number of GPS fixes was used as an indicator of animal use of shade patches and water and supplemental feeding areas. In this semi-arid environment, herd spread was greatest and subgroup division occurred during summer when forage biomass was high. Herd spread was the least and shade patches were used more during winter when forage biomass was low. Throughout the year spread was smallest and use of shade patches highest during the midday period compared to other periods of the day. Location of individuals in the center of the herd was not associated with their dominance ranking. There was no significant overall pattern of seasonal changes in cattle use of water and supplemental feeding areas. Seasonal forage availability and shade patches seem to have a greater influence on herd dispersion patterns and grouping dynamics than any effect of social dominance. Herd distribution is likely related to changes in forage biomass and temperature fluctuations which drive compensatory night-time feeding and thermoregulatory actions. Accurate ethological studies of herds depend on our ability to understand herd dynamics at multiple scales that affect and are relevant to animal's response to the landscape.