Many school-age children with a diagnosis of Language Impairment (LI) also have social communication difficulties. Some of these difficulties are related to deficits in emotion understanding. This thesis evaluates the effects of a social communication intervention designed to increase the production of emotion-based words as an indicator of emotional competence. For five elementary school-aged children with LI, the production of emotion-based words was analyzed by first determining the frequency of words produced in preintervention sessions for the following categories: happiness, sadness, anger, fear, surprise, and disgust. Following these measures, the participants received 20 intervention sessions over the course of treatment. Treatment involved the use of narratives to address emotion recognition and inferencing abilities. Individual analyses for each participant, including percent of nonoverlapping data (PND), were conducted for each participant in the categories of anger, fear, and surprise, to determine the effects on the production of emotion-based words during the intervention. The results for each participant and emotion category varied greatly, but each participant demonstrated improvement in the PND for at least one emotion category. These results were promising and underscore the value of social communication intervention for children with LI in the area of emotion understanding.

The purpose of this study was to determine the test-retest reliability of digitally recorded word recognition materials. Word recognition testing is included in a complete audiological evaluation to measure an individual's ability to discriminate what they hear. A phonetically balanced list of 50 monosyllabic words was presented to each participant at four different sensation levels (SL) using the American Speech Language Hearing Association recommended protocol for word recognition score testing. Each participant took a 10 minute break before the test was readministered. Participants included 40 subjects with varying levels of hearing loss, from normal hearing to severe hearing loss. The test and retest scores of all participants were analyzed to estimate the test-retest reliability to be .65 at 10 dB SL, .87 at 20 dB SL, .88 at 30 dB SL, and .95 at 40 dB SL. It was concluded that the word lists have strong test-retest reliability at 20, 30, and 40 dB SL and that the reliability increases as the presentation level increases.

Vocal fold hydration is important for efficient oscillation during voice production. Dehydration of the vocal fold surface is believed to produce adverse effects on the voice. Specifically, low environmental humidity, mouth breathing, and certain medical conditions may contribute to laryngeal and vocal fold dehydration. This dehydration effect may be quantified using the observed pressure and flow at the onset of phonation, operationally defined as phonation threshold pressure (PTP) and phonation threshold flow (PTF), respectively. Previous research has documented that nebulized isotonic saline (0.9% Na+Cl-) can reduce PTP. Additionally, the topical application of liquid saline increases vocal fold hydration in excised larynx studies. However, no studies have examined the prevention of vocal fold dehydration using aerosolized saline in an excised larynx mechanical model. The purpose of the current investigation was to determine the preventive effects of aerosolized isotonic saline in a physiologically realistic excised larynx model. Using a prospective, mixed experimental design with a control group, five bench-mounted, excised porcine larynges received 4-min doses of aerosolized saline delivered supraglottally for a total of 24 min. Subsequently, larynges received 1-min doses of desiccated air (<1% relative humidity) delivered supraglottally. A control group of five porcine larynges received only desiccated air. Phonation was attempted following each dose of aerosolized saline or desiccated air. The desiccation doses were repeated for both groups until the larynges were no longer able to phonate. The PTP and PTF were measured at baseline and following each dose of aerosolized saline or desiccated air. Analysis of the results indicated that aerosolized saline significantly delayed the adverse effects of vocal fold dehydration based on the total number of desiccation doses required to cease phonation for experimental versus control groups (p = .002). Trends demonstrated that PTP decreased after aerosolized saline and increased during desiccation trials. The PTF trends were similar during desiccation. The results from this study indicate that aerosolized saline may be used prophylactically to prevent vocal fold dehydration. These findings offer important advances in vocal fold hydration theory and dehydration prevention in a physiologically realistic excised mechanical model.

Distribution design for databases usually addresses the problems of fragmentation, allocation and replication. However, the main purposes of distribution are to improve performance and to increase system reliability. The former aspect is particularly relevant in cases where the desire to distribute data originates from the distributed nature of an organization with many data needs only arising locally, i.e., some data are retrieved and processed at only one or at most very few locations. Therefore, query optimization should be treated as an intrinsic part of distribution design. Due to the interdependencies between fragmentation, allocation and distributed query optimization it is not efficient to study each of the problems in isolation to get overall optimal distribution design. However, the combined problem of fragmentation, allocation and distributed query optimization is NP-hard, and thus requires heuristics to generate efficient solutions. In this thesis the foundations of fragmentation and allocation in databases on query processing are investigated using a query cost model. The considered databases are defined on complex value data models, which capture complex value, object-oriented and XML-based databases. The emphasis on complex value databases enables a large variety of schema fragmentation, while at the same time it imposes restrictions on the way schemata can be fragmented. It is shown that the allocation of locations to the nodes of an optimized query tree is only marginally affected by the allocation of fragments. This implies that optimization of query processing and optimization of fragment allocation are largely orthogonal to each other, leading to several scenarios for fragment allocation. Therefore, it is reasonable to assume that optimized queries are given with subqueries having selection and projection operations applied to leaves. With this assumption some heuristic procedures can be developed to find an “optimal” fragmentation and allocation. In particular, cost-based algorithms for primary horizontal and derived horizontal fragmentation, vertical fragmentation are presented.

We investigate the expressive power of different fragments of higher-order logics over finite relational structures (or equivalently, relational databases) with special emphasis in higher-order logics of order greater than or equal three. Our main results concern the study of the effect on the expressive power of higher-order logics, of simultaneously bounding the arity of the higher-order variables and the alternation of quantifiers. Let AAi(r,m) be the class of (i + 1)-th order logic formulae where all quantifiers are grouped together at the beginning of the formulae, forming m alternating blocks of consecutive existential and universal quantifiers, and such that the maximal-arity (a generalization of the concept of arity, not just the maximal of the arities of the quantified variables) of the higher-order variables is bounded by r. Note that, the order of the quantifiers in the prefix may be mixed. We show that, for every i [greater than or equal to] 1, the resulting AAi hierarchy of formulae of (i + 1)-th order logic is proper. This extends a result by Makowsky and Pnueli who proved that the same hierarchy in second-order logic is proper. In both cases the strategy used to prove the results consists in considering the set AUTOSAT(F) of formulae in a given logic F which, represented as finite structures, satisfy themselves. We then use a similar strategy to prove that the classes of [Sigma superscript i subscript m union Pi superscript i subscript m] formulae in which the higher-order variables of all orders up to i+1 have maximal-arity at most r, also induce a proper hierarchy in each higher-order logic of order i [greater than or equal to] 3. It is not known whether the correspondent hierarchy in second-order logic is proper. Using the concept of finite model truth definitions introduced by M. Mostowski, we give a sufficient condition for that to be the case. We also study the complexity of the set AUTOSAT(F) and show that when F is one of the prenex fragments [Sigma superscript 1 subscript m] of second-order logic, it follows that AUTOSAT(F) becomes a complete problem for the corresponding prenex fragment [Sigma superscript 2 subscript m] of third-order logic. Finally, aiming to provide the background for a future line of research in higher-order logics, we take a closer look to the restricted second-order logic SO[superscript w] introduced by Dawar. We further investigate its connection with the concept of relational complexity studied by Abiteboul, Vardi and Vianu. Dawar showed that the existential fragment of SO[superscript w] is equivalent to the nondeterministic inflationary fixed-point logic NFP. Since NFP captures relational NP, it follows that the existential fragment of SO[superscript w] captures relational NP. We give a direct proof, in the style of the proof of Fagin’s theorem, of this fact. We then define formally the concept of relational machine with relational oracle and prove the exact correspondence between the prenex fragments of SO[superscript w] and the levels of the relational polynomial-time hierarchy. This allows us to stablish a direct connection between the relational polynomial hierarchy and SO without using the Abiteboul and Vianu normal form for relational machines.

The mobile phone has been regarded as one of the most significant inventions in the field of communications and information technology over the past decade. Due to the rapid growth of mobile phone subscribers, hundreds of phone models have been introduced. Therefore, customers may find it difficult to select the most appropriate mobile phone because of information overload. The aim of this study is to investigate web support for customers who are selecting a mobile phone. Firstly, all the models of mobile phones in the New Zealand market were identified by visiting shops and local websites. Secondly, a list of all the features of these mobile phones was collated from local shops, websites and magazines. This list was categorised into mobile phone properties and performance criteria. An experiment then compared three different selection support methods: A (mobile phone catalogue), B (mobile phone property selection) and C (mobile phone property and performance criteria selection). The results of the experiment revealed that selection support methods B and C had higher overall satisfaction ratings than selection support method A; both methods B and C had similar satisfaction ratings. The results also suggested that males and females select their mobile phones differently, though there was no gender preference in selection support methods.

No abstract provided

Literature has identified the need to study socially pervasive ICT in context in order to understand how user acceptability of innovation varies according to different inputs. This thesis contributes to the existing body of knowledge on innovation studies (Chapter 2) and proposes a methodology for a conceptual model, for representing dynamic contextual changes in longitudinal studies. The foundation for this methodology is the 'Price of Convenience' (PoC) Model (Chapter 4). As a theory development Thesis, it deals with two related studies of socially pervasive ICT implementation: (1) voluntary adoption of innovations and (2) acceptance of new socially pervasive and ubiquitous ICT innovations (Chapters 6 and 7).

This thesis relates to research and development in the field of 3D mesh data for computer graphics. A review of existing storage and manipulation techniques for mesh data is given followed by a framework for mesh editing. The proposed framework combines complex mesh editing techniques, automatic level of detail generation and mesh compression for storage. These methods work coherently due to the underlying data structure. The problem of storing and manipulating data for 3D models is a highly researched field. Models are usually represented by sparse mesh data which consists of vertex position information, the connectivity information to generate faces from those vertices, surface normal data and texture coordinate information. This sparse data is sent to the graphics hardware for rendering but must be manipulated on the CPU. The proposed framework is based upon geometry images and is designed to store and manipulate the mesh data entirely on the graphics hardware. By utilizing the highly parallel nature of current graphics hardware and new hardware features, new levels of interactivity with large meshes can be gained. Automatic level of detail rendering can be used to allow models upwards of 2 million polygons to be manipulated in real time while viewing a lower level of detail. Through the use of pixels shaders the high detail is preserved in the surface normals while geometric detail is reduced. A compression scheme is then introduced which utilizes the regular structure of the geometry image to compress the floating point data. A number of existing compression schemes are compared as well as custom bit packing. This is a TIF funded project which is partnered with Unlimited Realities, a Palmerston North software development company. The project was to design a system to create, manipulate and store 3D meshes in a compressed and easy to manipulate manner. The goal is to create the underlying technologies to allow for a 3D modelling system to become integrated into the Umajin engine, not to create a user interface/stand alone modelling program. The Umajin engine is a 3D engine created by Unlimited Realities which has a strong focus on multimedia. More information on the Umajin engine can be found at www.umajin.com. In this project we propose a method which gives the user the ability to model with the high level of detail found in packages aimed at creating offline renders but create models which are designed for real time rendering.

Personal document management is the activity of managing a collection of digital documents performed by the owner of the documents, and consists of creation/acquisition, organisation, finding and maintenance. Document management is a pervasive aspect of digital work, but has received relatively little attention from researchers. The hierarchical file system used by most people to manage their documents has not conceptually changed in decades. Although revolutionary prototypes have been developed, these have not been grounded in a thorough understanding of document management behaviour and therefore have not resulted in significant changes to document management interfaces. Improvements in understanding document management can result in productivity gains for knowledge workers, and since document management is such a common activity, small improvements can deliver large gains. The aim of this research was to understand how people manage their personal document collections and to develop guidelines for the development of tools to support personal document management. A field study was conducted that included interviews, a survey and file system snapshot. The interviews were conducted with ten participants to investigate their document management strategies, structures and struggles. In addition to qualitative analysis of semi-structured interviews, a novel investigation technique was developed in the form of a file system snapshot which collects information about document structures and derives a number of metrics which describe the document structure. A survey was also conducted, consisting of a questionnaire and a file system snapshot, which enabled the findings of the field study to be validated, and to collect information from a greater number of participants. The results of this research culminated in (1) development of a conceptual framework highlighting the key personal document management attitudes, behaviours and concerns; (2) model of basic operations that any document management system needs to provide; (3) identification of piling, filing and structuring as three key document management strategies; (4) guidelines for the development of user interfaces to support document management, including specific guidelines for each document management strategy. These contributions both improve knowledge of personal document management on which future research can build, and provide practical advice to document management system designers which should result in the development of more usable system.