Yes / Flexural performance of concrete beams reinforced with steel–FRP composite bar (SFCB) was investigated in this paper. Eight concrete beams reinforced with different bar types, namely one specimen reinforced with steel bars, one with fiber-reinforced polymer (FRP) bars and four with SFCBs, while the last two with hybrid FRP/steel bars, were tested to failure. Test results showed that SFCB/hybrid reinforced specimens exhibited improved stiffness, reduced crack width and larger bending capacity compared with FRP-reinforced specimen. According to compatibility of strains, materials’ constitutive relationships and equilibrium of forces, two balanced situations, three different failure modes and balanced reinforcement ratios as well as analytical technique for predicting the whole loading process are developed. Simplified formulas for effective moment of inertia and crack width are also proposed. The predicted results are closely correlated with the test results, confirming the validity of the proposed formulas for practical use. / National Natural Science Foundation of China (51678514), China Postdoctoral Science Foundation (2018M642335), the Science and Technology Project of Jiangsu Construction System (2018ZD047), the Cooperative Education Project of Ministry of Education, China (201901273053), the Blue Project Youth Academic Leader of Colleges and Universities in Jiangsu Province (2020), the Six Talent Peaks Project of Jiangsu Province (JZ038, 2016) and the Yangzhou University Top Talents Support Project

No / In order to investigate the eccentric compression behaviors of steel-FRP composite bar (SFCB) reinforced concrete (RC) columns subjected to chloride corrosion, the mechanical experiments of chloride corroded SFCBs and SFCBs RC eccentric compression columns were conducted. The effect of reinforcement type and ratio, eccentricity, slenderness, stress level and corrosion duration on bearing capacity, deformation, crack and failure pattern were investigated. The results showed that the strength retention ratio of reinforcement decreases with the increase of corrosion duration, the ultimate strengths of steel rebar, SFCB and FRP rebar decreased by 12.2%, 9.9% and 3.6%, respectively, when compared with those of uncorroded counterparts. With the increase of steel content of reinforcement, the load bearing capacity of eccentric compression RC column increases while the deformation decreases gradually. The load bearing capacity of corroded steel, SFCB and FRP RC columns maximally decreased by 16.6%, 12.4% and 7.2%, respectively, when compared with those of uncorroded counterparts. Based on the simplified materials constitutive relations and reasonable basic assumptions, formulae for discriminate failure mode, moment magnification factor and bearing capacity were developed. The predicted failure pattern, moment magnification factor and bearing capacity are in good agreement with the test results, confirming the validity of the proposed formulae, the results can be used as a reference for engineering application. / High-End Foreign Experts Project of Ministry of Science and Technology, China (G2022014054L), the Natural Science Foundation of Jiangsu Province, China (BK20201436), the Science and Technology Project of Jiangsu Construction System (2018ZD047, 2021ZD06), the Science and Technology Project of Gansu Construction System (JK2021-19), the Opening Foundation of Jiangsu Province Engineering Research Center of PrefabricatedBuilding and Intelligent Construction (2021), the Science and Technology Cooperation Fund Project of Yangzhou City and Yangzhou University (YZ2022194, YZU212105), the Science and Technology Project of Yangzhou Construction System (2022ZD03, 202204), the Nantong Jianghai (226) talents project, the Blue Project Youth Academic Leader of Colleges and Universities in Jiangsu Province (2020).

Yes / Eccentric compression behaviour of reinforced concrete (RC) columns reinforced by steel-FRP composite bars (SFCBs) was investigated through experimental work and theoretical analyses. The tension and compression test results show that SFCBs demonstrate a stable post-yield stiffness. The mechanical properties of the composite reinforcement have a significant influence on eccentric compression behaviour of the reinforced concrete columns, in terms of failure mode, crack width, deformation and bearing capacity. Formulae were also developed to discriminate failure mode and to determine moment magnification factor, bearing capacity and crack width of the columns studied, with the theoretical predictions being in a good agreement with the experimental results. In addition, parametric studies were conducted to evaluate the effects of mechanical properties of reinforcement, reinforcement ratio, eccentricity, slenderness ratio, types of reinforcement and concrete on the eccentric compression behaviour of RC columns. The results show that the compressive performance is significantly improved by using the high performance concrete, i.e. reactive powder concrete (RPC) and engineered cementious composites (ECC). / financial supports of the work by the National Natural Science Foundation of China (51678514), the Natural Science Foundation of Jiangsu Province, China (BK20201436), the China Postdoctoral Science Foundation (2018M642335), the Science and Technology Project of Jiangsu Construction System (2018ZD047), the Deputy General Manager Science and Technology Project of Jiangsu Province (FZ20200869), the Cooperative Education Project of Ministry of Education, China (201901273053), the Blue Project Youth Academic Leader of Colleges and Universities in Jiangsu Province (2020), the Six Talent Peaks Project of Jiangsu Province (JZ-038, 2016), the Yangzhou University Top Talents Support Project and the Jiangsu Government Scholarship for Overseas Studies.

Yes / This paper numerically investigates flexural performance of Ultra-High Performance Concrete (UHPC) beam reinforced with Steel-Fibre-Reinforced Polymer (FRP) Composite Bars (SFCBs) in terms of flexural stiffness, moment capacity, deflection, ductility and energy dissipation. The effect of various parameters, include the inner steel core area ratio of SFCB, yield strength of inner steel core, elastic modulus and ultimate strength of outer-wrapped FRP, reinforcement ratio, type and strength of concrete were studied. The results demonstrate that the inner steel core area ratio of SFCB, reinforcement ratio and the elastic modulus of SFCB's outer FRP have significant effect on the overall flexural performance of SFCB reinforced UHPC beam. The overall flexural performance of SFCB reinforced UHPC beam is slightly improved by increasing the yield strength of inner steel core of SFCB, but not affected by the ultimate strength of SFCB's outer FRP when specimen occurred compression failure. The results also exhibit that the flexural performance of UHPC beam reinforced with SFCBs is significantly improved when compared to those of reinforced high strength concrete (HSC) beam and normal strength concrete (NSC) beam. The flexural stiffness and the moment capacity of SFCB reinforced UHPC beam at the ultimate point were 2.0 and 2.4 times, respectively, of those of reinforced NSC counterpart. / Natural Science Foundation of Jiangsu Province, China (BK20201436), the China Postdoctoral Science Foundation (2018M642335), the Science and Technology Project of Jiangsu Construction System, China (2018ZD047, 2021ZD06), the Science and Technology Project of Gansu Construction System, China (JK2021-19), the National Natural Science Foundation of China (51678514), the Science and Technology Innovation Fund of Yangzhou University, China (2020-65), the Open Foundation of Jiangsu Province Engineering Research Center of Prefabricated Building and Intelligent Construction, China (2021), the Science and Technology Cooperation Fund Project of Yangzhou City and Yangzhou University, China (YZU212105), the Practice and Innovation Plan for Postgraduates in Jiangsu Province, China (SJCX21_1589), the Blue Project Youth Academic Leader of Colleges and Universities in Jiangsu Province, China (2020) and the Deputy General Manager Science and Technology Project of Jiangsu Province, China (FZ20200869). References

Yes / To study the flexural behavior of Steel-FRP (Fiber-Reinforced Polymer) Composite Bars (SFCBs) reinforced Reactive Powder Concrete (RPC) frame beams, the flexural behavior of six frame beams with different types of concrete and reinforcement was simulated and analyzed using the finite element software ABAQUS. The strain behavior of concrete and reinforcement was simulated using real strain models, and the simulation results matched well with the experimental results. Based on the validated model, the effect of mechanical properties of concrete and SFCB, reinforcement ratio, and the dimensions of frame beam on the flexural behavior of frame beams was parametrically analyzed. The results showed that, compared with the steel-reinforced ordinary concrete (OC) frame beam, the ultimate deflection of SFCB-OC frame beam increased by 5%. Compared with the SFCB-OC frame beam, the bearing capacity and ultimate deflection of the SFCB-RPC frame beam increased by 16% and 22%, respectively. Improving the steel content of SFCB reduced the ultimate load and deformation of SFCB-RPC frame beam. The yield strength of SFCB core steel had a significant influence on the yield load of frame beam, but a small influence on the ultimate load and deformation. Enhancing the elastic modulus of SFCB out-wrapped FRP reduced the ultimate deformation of the frame beam. Improving the reinforcement ratio of SFCB increased the bearing capacity and reduced the deformation. When reinforced concrete frame beams had similar bearing capacity, the cross-sectional dimensions of steel-RPC frame beam, FRP-RPC frame beam, and SFCB-RPC frame beam are 90.1%, 61.5%, and 72.7%, respectively, of those of their corresponding respective reinforced OC frame beams. All reinforced RPC frame beams exhibited high bearing capacity, good deformation, ductility, and energy dissipation performance. This research can provide a reference for the design of SFCB-RPC frame beams. / High-End Foreign Experts Project of Ministry of Science and Technology, China (G2022014054L), the Science and Technology Project of Gansu Construction System (JK2021-19), the Science and Technology Project of Jiangsu Construction System (2018ZD047, 2021ZD06, 2023ZD104, 2023ZD105), the Science and Technology Cooperation Fund Project of Yangzhou City and Yangzhou University (YZ2022194), the Yangzhou Construction System Science and Technology Project (202309, 202312), the Research Project of Jiangsu Civil Engineering and Architecture Society (the Second Half of 2022). / The full-text of this article will be released for public view at the end of the publisher embargo on 27 Jan 2025.