The subject of the diploma thesis is to elaborate the project documentation of a newbuilt multifunctional building in Považská Bystrica. The multifunkcional building is designed as a three-storey without basemen. In the first ground floor there are dental and gynecological surgeries with facilites, a cafe and director's office. In the second there are office spaces with facilities for rent. On the level of the third floor there are two-rooms flats and one four-room flat, while there are also storage spaces for each of the flats. The building of the multifunctional house is based on reinforced concrete foundations. The vertical construction system consist of reinforced concrete perimeter walls and perimeter reinforced concrete columns in combination with an internal load-bearing walls of the reinforcing core of the building. The partition walls are designed as a plasterboard walls. The horizontal load-bearing structures are made of reinforced concrete prestressed panels. The roofing of the building is designed as a flat one-layer roof. The roof of the terrace consist of an extensive vegetation flat one-layer roof. The roofing of the awning at the main entrance to the building is design as a reinforced concrete monolithic console with one-layer flat roof a skylight. The building is insulated with the external thermal insulation composite system (ETICS). The façade of the communication core of the building is made of brick cladding. The rest of the façade is made of a thin layer white plaster.

The subject of the diploma thesis is to elaborate the project documentation of a newbuilt wellness hotel located in the village of Lipno nad Vltavou. The building is designed as a non-basement one with three floors. It is visually divided into several parts. On the first floor there are two operational parts – a wellness and a restaurant. On the second and third floor there are small apartments for temporary guests' accommodation. The building foundations are made of concrete and reinforced concrete. The load-bearing structure is made of aerated concrete blocks and sand-lime blocks. The ceiling structures are made of cast-in-place reinforced concrete. The roof of the first floor is designed as a one-layer flat extensive green roof. The roofing of a main reception is designed by a sloping roof and the third floor as three adjoining sloping roofs. These roofs are formed by a system of aerated concrete roof panels and a water-dissipating layer of folded sheet metal. The building is insulated with an external thermal insulation composite system (ETICS). The part of the facade consist of facade cladding strips and part of the render of light color.

Diploma thesis describes the design and processing of project documentation of the multifunctional building. The multifunctional building is located in the central part of the town Náměšť nad Oslavou. The building has 4 floors. It is partly cellared building with flat roof and walkable terraces. This building is consisted of 2 functional parts, the first part is designed for living and the second one is designed for contact with the customer. There are shops and offices. The first floor is wheelchair accessible. In the basement there is a technical background of the building and cellars for housing units. In this multifunctional building we can find 13 residential units and five offices. All of the floors are connected with staircase and lift. The Carpark and the private garden with playground are also part of this residential area. This building is based on concrete blocks. Load-bearing, peripheral walls and connecting walls are made of ceramic blocks. A monolitic ceiling construction is the combination of the iron and the concrete. Two types of insulation are used in peripheral walls. The first one is called ETICS, external thermal insulation composite system, made of polystyrene. The second type of insulation is facade cladding system where the main insulation layer is made of mineral wool. The insulation layer is replaced by XPS polystyrene where facade is in contact with the ground. Facade cladding panels are made of cement and wood fibers called Cembrit.

Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.

Diploma thesis designs a barrier free new building of medical devices – policlinic (health center) with 14 medical workplaces. Object has three floors and basement. The building is covered by a vegetation flat roof. Building of policlinic is based on strip foundations and load-bearing walls are made from sand-lime blocks. Horizontal systém is created like reinforced concrete ceiling and in the same way internal staircase. The building is design at passive architecture – have compact form, thick layer of insulation and airtight cover. The main glass facade is oriented to the sout. There is used heat recovery air conditioning and heat pumping for heating in building. Health center satisfy currently legislation.

The aim of this thesis is to elaborate project documentation for new construction of low-energy residential building with 16 luxury apartments, apartment without barriers and with pharmacy of basic type. It is a four-storey detached building without basement, with flat roof, roof terraces and with balconies. Residential building is located in one of the most enjoyable parts of the city of Zlín – Jižní Svahy II in the vicinity of Central park with bicycle path and with beautiful view of the Zlín. The building will be located on land plot No. 2144/46, where is still situated unfinished building "Torso" from the late 80 years. The residential building is designed in brick system Heluz, ceiling construction is made up of prestressed hollow core slabs, perimeter walls are with external thermal insulation composite system and external doors and windows are made of plastic and aluminum with triple glazing. For heating and water heating will be utilized renewables energy, such as heat pump and solar collectors. Residential units with three residential rooms are designed with a forced ventilation by means of ventilation units with heat recovery. The building also uses modern shielding elements such as outdoor blinds and horizontal sun breakers. The part of the project are also disposition studies, seminar work and energy part.

The subject of this thesis is the design and project documentation of a new multifunctional house in Strakonice. The building has four floors, without basement, and is located on a slightly sloping land in the suburban part of the town of Strakonice. It is based on shallow foundations and covered with a flat roof. It is a transverse wall structural system, build with clay block masonry, with the semi-assembled ceiling structures of ceramic and concrete beams and inserts. It is conceived as a double-aisle layout. The ground floor of each wing consists of the establishment of shops and house facilities. The overground floors are designed as six residential units of varying size category. Both tracts have separate entrances to both the residential portion and to individual businesses. The building is designed from traditional building materials. In addition to the architectural construction and civil-engineering design, a part of this project is also a fire safety design and an assessment from the perspective of building physics.