The topic of this master's thesis is the development of composite materials based on inorganic binders for use in extreme conditions. It means especially geopolymeric or alkali activated materials (AAM) based composites. The theoretical part of this thesis summarizes knowledges about the development and use of alkali-activated materials, their structure and mechanisms of their formation. It also deals with the applicable raw materials for AAM and their exciters, which are in particular water glass and sodium hydroxide. There also have been a summary of the effects of high temperatures and chemicals on the mechanical properties of AAM and the requirements of standard EN 1504-3 for repairing materials. The task of the practical part was to develop a repair mortar for concrete structures based on AAM so that its production was as simple as possible, ie one-component materials. Gradually six recipes have been develeoped. Test specimens made from these recipes have been putted to selected tests according to the requirements of ČSN EN 1504-3.

In the theoretical part of the thesis are generally characterized hydraulically bound mixtures, their types, classification systems, manufacturing technology and the laying. There are also described experiences from abroad with the use secondary and recycled materials in hydraulically bound mixtures. The practical part deals with the experimental verification of the possibility of the use of secondary materials in hydraulically bound mixtures in construction of road infrastructure. In road laboratory Institute of road structures Brno university of technology was the five proposed mixtures, an assessment of their parameters with regard to the possibility of using these mixtures in the road sub-base layers. The work is also aimed at comparison of results elasticity modules reached laboratory testing and experimental measurements on road polygon.

The work is divided into two parts. The first part deals with the description of unbound and bound base layers and their comparison. Furthermore is presented the description of the recycled concrete, its properties, production, improvement and issues. International experiences with recycled concrete technology are described as well. The practical part is focused on laboratory testing of concrete recycled material taken from the highway D1. The aim of this part is to determine whether the concrete can be recycled back into unbound or bound base layers and concrete casing.

This work solves creation of calibration relations to determine cube compressive strength, dynamic and static elastic modulus of alkali-activated concrete by non-destructive methods. Alkali-activated concrete is spoken of as a new material used in civil engineering. It shows different properties than normal concrete based on Portland cement. That's why the modification of common calibration relation seems necessary. Fresh concrete was made in the concrete plan ŽPSV a.s., Uherský Ostroh in three mixtures and always in the number of 18 cubes and 3 prisms. The samples were tested by impact hammer Schmidt type L, type N, SilverSchmidt PC-N and by ultrasound in 6 time periods of three specimens. After that, the cube compressive strength was determined. Status of static elastic modulus was determined in a time period of 28 days. The results are calibration relations to determine the progress of compressive strength and modulus of elasticity for each method and their combination.

The determination of strain properties of masonry in the direction parallel to bed joints is a fundamental pre-requisite for designing structures, where masonry is subjected to horizontal stresses (e. g. strengthening with prestressing). The diploma thesis summarized techniques of determination of masonry modulus of elasticity presented in available literature. The goal is to suggest suitable methodology of determination of masonry modulus in direction parallel to the bed joints. In the practical part of the diploma thesis is that methodology verified by experimental test and results of tests are analyzed and discussed.

This graduation thesis is aimed to presentation heat isolation materials for the floor constructions. The experimental part is devoted physical - mechanical properties suggested very light concretes with the cement. The main part of the thesis is devoted to form of the transit and putting of the individual heat isolation materials. In the end are suggested structures of the floor constructions with the respect to their properties and price.

This final thesis is divided into two parts. The first, theoretic part is focused on issue about industrial concrete floors, their production and adjustment. Special attention is paid to the mineral shakes, steel fibres and concrete, which is used to these constructions. There are more information about specific standardized tests of steel fibre concrete and some damages of concrete floors in other chapters. Second part of the diploma thesis is practical. Theoretical knowledge are applied to the actual construction. Survey methodology and diagnostic work are also desribed. Data processing and evaluation with the commentary is also attached to this part. The conclusion summarizes the results and selected findings relating to the issue are also included there.

Civil engineering development is connected with the application of new construction methods and the development of new building materials. Concrete, as one of the basic building materials, is part of this development. A major turning point in the development of concrete and its properties occurred with the use of new, more efficient plasticizing additives. This allowed to produce concrete with lower water cement ratio, while increasing the strength of concrete. Gradually, the compressive strength of concrete boundary has moved by several levels, when there are currently commonly used concrete with strength of about 100 N/mm2 and with the special methods of concrete production strength range from 250 to 300 N/mm2. A negative aspect of the development of (ultra) high-strength concrete is their energy and economic demands. A characteristic feature of high-strength concrete is a high content of cement and very fine admixtures, especially silica fume. One way to improve the economics of these types of concrete is the application of cheaper admixture based on industrial waste. The content of this work is the observation and description of the properties of high-strength concrete and reactive powder concrete, in which the admixtures were based on industrial waste were applied. Part of this work is the comparison of economic parameters for individual types of concrete.

High-strength concrete (HSC) belongs in the recent years to frequently used types of concrete. It allows realization of static challenging structures and also shows due to its dense structure greater durability especially against aggressive media. Currently HSC construction realization abroad is not exceptional. It’s using in the Czech Republic is still limited. When realized, then in a small scale in civil engineering works. The realization of high-strength concrete structures is closely related with the concrete construction quality verification. Good efficiency of the quality control methods can provide non-destructive testing methods (NDT), especially when investigating strength of concrete built in structure. A lack on relevant data for non-destructive testing of HSC in technical and normative rules is to be considered as a significant deficiency. Evident for HSC generally is the lack in literature on deeper analysis of the factors affecting their non-destructive testing, as well a meaningful methodology or practically usable calibration relationships. HSC differs from ordinary concrete not only by used components, but also by more compact structure with different strength – elastic characteristics. Considering these differences, HSC strength prediction can not be performed by using calibration relationships developed for ordinary concrete. Moreover, the question is to what extent the current knowledge of the NDT results influencing factors can be considered as valid. The paper presents findings on the effects of the key factors affecting the measurement results of Schmidt hardness method and ultrasonic pulse method, including recommendations for the practical application of these methods. The problematic of static vs. dynamic modulus of elasticity was also solved. Calibration equations for predicting the compressive strength of HSC from the non-destructive testing parameter were elaborated, showing high cohesion among variables and practically usability.

The thesis deals with the measurement of the elastic modulus of concrete in existing structures and possibilities of applicability of equations for the calculation of characteristic values of concrete compressive strength on the modulus of elasticity. The modulus of elasticity is determined by dynamic and static methods on specimens taken from the concrete blocks, whose composition varies by a water cement ratio and varying amounts of admixtures. In conclusion, the results of the measurements are compared and the characteristic values of the modulus of elasticity is determined.