When speaking about energy it means speaking about life, activity, economy, growth and environmental issues. The issue of energy has been the main article all over the world in recent years, this is due to the importance of energy to life and its impact on the environment. For example, Paris climate change meeting in 2015 is one of the recent global meeting which directly related to the energy use by nations. The meeting was mainly focused up on the restriction of greenhouse gas emission which implies that industries should think about other alternative energy resources rather than fossil fuel for positive impact on climatic change. This is one of the cases that led industries into greater competition in the global market. Industries must consider energy alternatives which is safe for the environment and by using such energy a competitive product with better quality and quantity should be produced. This challenge has motivated industries to look and study the energy that they are using currently. Studies and researches show that one of the main and most abundant energy resources that most of these industries can get is by improving the energy efficiency or managing the energy that they currently use. The main aim of this thesis is to provide Arizona chemical plant (Kraton) at Sandarne on the potential energy saving by managing their energy use. The first wisdom in energy utilization is managing and using the energy they possess efficiently. In Arizona plant at Sandarne, the product named “Pitch” (a natural viscoelastic polymer or rosin) is a fuel used as the primary energy supply for the production of steam by boilers. The steam may be utilized well but the energy in the condensate (after steam loses its latent heat) is not addressed well enough. Hence this paper has studied on how significant is the energy lost by the steam condensate is and how its recovery can be used to save energy and cost. The plant produces about an average of 11.42 ton of steam each hour in a year. This steam can be returned or fully recovered (100%) as condensate from the law of conservation of mass since only energy is lost from the steam. But the plant returns a maximum of about 3ton of condensate each hour. This amount is relatively low compared to the amount of condensate recovery possibility. Recovery possibility of condensate return showed that the plant at Sandarne can return at least 8.5 ton of condensate  each hour. In comparison with the current return estimated 5.5 ton of condensate is being lost simply as waste each hour leading to about 400 SEK minimum cost loss. The calculation of cost is in minimum because the charge from water supply and condensate effluent disposal charge are not considered. In this paper only recovery from the easily recoverable steam condensate is being considered (25% of the system) which resulted in payback time of the proposed investment 1.88 years without considering the above explained charges. It is much motivating study considering the generalized approach and over simplified method. If a deeper investigation is made on the potential, it can be clearly shown that how significant the potential is in securing and sustaining energy and environmental issues. Ensuring the security and sustainability of energy which addresses the environmental issue precisely will help the plant to stay on the race of global market competition.   Keywords: Energy efficiency, Boiler efficiency, Energy management, Condensate recovery,

<p>Evaporative cooling is a highly energy efficient alternative to conventional vapor compression cooling system. The sensible cooling effect of evaporative cooling systems is well documented in the literature. Direct evaporative cooling however increases the relative humidity of the air as it cools it. This has made it unsuitable for data centers and other applications where humidity control is important. Desiccant-based dehumidifiers (liquid, solid or composites) absorb moisture from the cooled air to control humidity and is regenerated using waste heat from the data center. This work is an experimental and theoretical investigation of the use of desiccant assisted evaporative cooling for data center cooling according to ASHRAE thermal guidelines, TC 9.9. The thickness (depth) of the cooling pad was varied to study its effect on sensible heat loss and latent heat gain. The velocity of air through the pad was measured to determine its effect on sensible cooling. The flow rate of water over the pad was also varied to find the optimal flow for rate for dry bulb depression. The configuration was such that the rotary desiccant wheel (impregnated with silica gel) comes after the direct evaporative cooler. The rotary desiccant wheel was split in a 1:1 ratio for cooling and reactivation at lower temperatures. The dehumidification effectiveness of a fixed bed desiccant dehumidifier was compared with that of a rotary desiccant wheel and a thermoelectric dehumidifier. A novel condensate recovery system using the Peltier effect was proposed to recover moisture from the return air stream, (by cooling the return air stream below its dew point temperature) thereby optimizing the water consumption of evaporative cooling technology and providing suitable air quality for data center cooling. The moisture recovery unit was found to reduce the mass of water lost through evaporation by an average of fifty percent irrespective of the pad depth.</p> <p> </p>