No description available.

No description available.

<p dir="ltr">Engine downsizing with the assistance of turbomachinery and/or energy storage system has been realized to be one of the most promising and cost-effective solutions in pursuit of cleaner and more efficient engine products. Fundamental challenges however, exist in terms of control and energy management of advanced powertrain featuring turbocharged engines due to their complex dynamics, inherent coupling nature, and strict emission regulations concerning environmental preservation. For the purpose of addressing those challenges, this dissertation develops an integrated framework for modeling, robust coordinated control, and power management of advanced powertrains featuring turbocharged engines.</p><p dir="ltr">This dissertation first studies an advanced turbocharged lean-burn SI natural gas engine manufactured by Caterpillar, and develops an intuitive physics-based, control-oriented model. The obtained control-oriented model is validated against a high-fidelity truth-reference model and serves as the basis on which a robust coordinated control system is developed. The dissertation then proposes a comprehensive procedure for synthesizing a robust coordinated control system applying optimization-based H_infinity control theory. Specifically, this framework outlines a methodology of modeling uncertainties to account for system robustness, and providing valuable insights into the tuning of general coordinated control system design. For performance testing, the synthesized robust coordinated control system is implemented on the high-fidelity truth-reference model. A parallel closed-loop simulation strategy is adopted so that direct comparison between the robust coordinated control system and benchmark production control system (composed of multiple fine-tuned PID controllers) developed by Caterpillar can be carried out. Simulation results manage to demonstrate the merit of utilizing the robust coordinated control system, with better performances observed in terms of steady-state tracking, transient response, and disturbance attenuation.</p><p dir="ltr">The second part of this dissertation focuses on the development of a proposed novel hybrid electric wheel loader which features a downsized engine assisted by turbocharger and an energy storage system. Research efforts documented in this dissertation involve system configuration, controller design (both component-level and supervisory-level), simulation development (both software-in-the-loop and hardware-in-the-loop) and simulated validation for the proposed novel wheel loader. Inspired by the successful simulation results, John Deere assembled a real demo vehicle with the proposed powertrain and conducted some in-field testing, from which encouraging experimental results are observed.</p>

Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: This work considers the control of reconfigurable assembly systems using a welding assembly system as a case study. The assembly system consists of a pallet magazine, a feeding system, an inspection and removal system, a welding system and a conveyor. The aim of the work is to compare PC and PLC as controllers, as well as to compare two different approaches to reconfigurable control. The control system of the pallet magazine was developed using a PC and a PLC. The PC control was programmed using Visual C#, while the PLC was programmed in Ladder Logic using Siemens S-300 STEP7. The two controllers were compared based on the attributes that measure the quality of a controller's software, which include its capability, availability, usability and adaptability. The approaches to reconfigurable control considered were the agent-based methodology and the IEC 61499 distributed control methodology, both of which were applied to the feeding system. The agent-based control system was implemented using the JADE agent platform, while the IEC 61499 distributed control system was implemented using the FBDK software kit. These two methods were compared based on the characteristics of a reconfigurable system, which include the system's modularity, integrability, convertibility, diagnosability, customization and scalability. The result obtained in comparing the PC to the PLC shows that the PLC performs better in terms of capability, availability and usability, while the PC performs better in terms of adaptability. Also, the result of the comparison between the agent-based control system and the IEC 61499 distributed control system shows that the agent-based control system performs better in terms of integrability, diagnosability and scalability, while the IEC 61499 distributed control system performs better in terms of modularity and customization. They are, however, on a par in terms of convertibility. / AFRIKAANSE OPSOMMING: Hierdie werk beskou die beheer van herkonfigureerbare monteringstelsels met 'n sweismonteringstelsel as gevallestudie. Die monteringstelsel bestaan uit 'n paletmagasyn, 'n voerstelsel, 'n inspeksie-en- verwyderingstelsel, 'n sweisstelsel en 'n voerband. Die mikpunt van die werk is om persoonlike rekenaars (PCs) en programmeerbare-logikabeheerders (PLCs) as beheerders te vergelyk, asook om twee verskillende benaderings tot herkonfigureerbare beheer te vergelyk. Die beheerstelsel van die paletmagasyn is ontwikkel met 'n PC en 'n PLC. Die PC-beheer is in Visual C# geprogrammeer, terwyl die PLC in leerlogika met Siemens S-300 STEP7 geprogrammeer is. Die twee beheerders is vergelyk in terme van die eienskappe wat die kwaliteit van 'n beheerder se sagteware meet en sluit in vermoë, beskikbaarheid, bruikbaarheid en aanpasbaarheid. Die benaderings tot herkonfigureerbare beheer wat oorweeg is, is die agent-gebaseerde metodologie en die IEC 61499 verspreide-beheermetodologie. Beide is op die voerstelsel toegepas. Die agent-gebaseerde beheerstelsel is geïmplementeer met behulp van die JADE agent-platform, terwyl die IEC 61499 verspreide stelsel geïmplementeer is met behulp van die FBDK sagteware-stel. Hierdie twee metodes se vergelyking is gebaseer op die eienskappe van 'n herkonfigureerbare stelsel, waarby die stelsel se modulariteit, integreerbaarheid, diagnoseerbaarheid, pasmaakbaarheid en skaleerbaarheid ingesluit is. Die resultate wat in die vergelyking tussen die PC en PLC verkry is, toon dat die PLC beter vaar in terme van vermoë, beskikbaarheid en bruikbaarheid, terwyl die PC beter vaar in terme van aanpasbaarheid. Die resultaat van die vergelyking tussen die agent-gebaseerde beheerstelsel en die IEC 61499 verspreide beheerstelsel wys dat die agent-gebaseerde beheerstelsel beter vaar in terme van integreerbaarheid, diagnoseerbaarheid en skaleerbaarheid, terwyl die IEC 61499 verspreide beheerstelsel beter vaar in terme van modulariteit en pasmaakbaarheid. Hulle is egter vergelykbaar in terme van omskepbaarheid.

<p>Emerging mobile mapping systems include a wide range of platforms, for instance, manned aircraft, unmanned aerial vehicles (UAV), terrestrial systems like trucks, tractors, robots, and backpacks, that can carry multiple sensors including LiDAR scanners, cameras, and georeferencing units. Such systems can maneuver in the field to quickly collect high-resolution data, capturing detailed information over an area of interest. With the increased volume and distinct characteristics of the data collected, practical quality control procedures that assess the agreement within/among datasets acquired by various sensors/systems at different times are crucial for accurate, robust interpretation. Moreover, the ability to derive semantic information from acquired data is the key to leveraging the complementary information captured by mobile mapping systems for diverse applications. This dissertation addresses these challenges for different systems (airborne and terrestrial), environments (urban and rural), and applications (agriculture, archaeology, hydraulics/hydrology, and transportation).</p> <p>In this dissertation, quality control procedures that utilize features automatically identified and extracted from acquired data are developed to evaluate the relative accuracy between multiple datasets. The proposed procedures do not rely on manually deployed ground control points or targets and can handle challenging environments such as coastal areas or agricultural fields. Moreover, considering the varying characteristics of acquired data, this dissertation improves several data processing/analysis techniques essential for meeting the needs of various applications. An existing ground filtering algorithm is modified to deal with variation in point density; digital surface model (DSM) smoothing and seamline control techniques are proposed for improving the orthophoto quality in agricultural fields. Finally, this dissertation derives semantic information for diverse applications, including 1) shoreline retreat quantification, 2) automated row/alley detection for plant phenotyping, 3) enhancement of orthophoto quality for tassel/panicle detection, and 4) point cloud semantic segmentation for mapping transportation corridors. The proposed approaches are tested using multiple datasets from UAV and wheel-based mobile mapping systems. Experimental results verify that the proposed approaches can effectively assess the data quality and provide reliable interpretation. This dissertation highlights the potential of modern mobile mapping systems to map challenging environments for a variety of applications.</p>