Using the technology afforded by Winschel et al., cyclen-1, a high affinity, strong complexation agent for 8-hydroxypyrene-1,3,6 trisulfonate and derivatives, a new assay has been developed for fluorescently labeling proteins of interest (POIs). Ligation of the endogenous ligand for nicotinic acetylcholine receptors (nAChRs), acetylcholine, using click chemistry afforded the triazole derivative of an alkynyl-acylcholine (compound 1) with 8-azidopyrene-1,3,6 trisulfonate (compound 2). Liposomes encapsulated with Rhodamine B were used to strengthen the initial fluorophore response of compound 2, using an anchored form of cyclen-1 complex. Using a palmitoyl tail as the lipophilic moiety for liposomal amplification, the subsequent response has a fluorophore ratio of up to 1:1 million, compound 2:Rhodamine B molecules. in vitro assay using compound 2 and cyclen-1 anchored liposomes with HEK-293 cells produced a positive binding response, allowing brightly colored fluorescent images of nAChRs upon the cellular membrane. A control for nAChR binding was performed using a co-culture of HEK-293 and endothelial cell lines. Control experiments show compound 2 and liposomes weak binding endothelial cells, however, this could be do to accumulation from another mechanism, more work is necessary to prove whether or not this is correct.

A series of new, octadentate, fluorescent, macrocyclic ligands have been prepared with a view to using them to study aromatic anion sequestration. The eight-coordinate Cd(II) complexes of the ligands have been shown capable of acting as receptors for a range of aromatic oxoanions. This has been demonstrated by perturbation of both 1H NMR chemical shift values and the anthracene derived fluorescence emission intensity as the potential guest anion and the host are combined. Non-linear least squares regression analysis of the resulting titration curves leads to the determination of binding constants in 20% aqueous 1,4-dioxane which lie in the range 10^2.3 M-1 (benzoate) to 10^7.5 M-1 (2,6-dihydroxybenzoate). By reference to the X-ray determined structures of related, but non-fluorescent inclusion complexes, the primary anion retention force is known to arise from hydrogen bonding between the anion and four convergent hydroxy groups that exist at the base of a cavity that develops in the complexes as their aromatic groups juxtapose upon coordination. This work reveals significant stability enhancement when hydroxy groups are positioned on the anion at points where O-H...pi hydrogen bonding to the aromatic rings that constitute the walls of the cavity becomes geometrically possible.

Small molecule synthesis has become a valuable tool in the study of biological systems. Biologically active compounds can be designed based on well-characterized endogenous systems or they can be found through the screening of large libraries of small molecules. This work involves the development of a small library of cyclic thiourea-based small molecules by use of an unreported synthetic pathway. Briefly, parent thioureas were cyclized by reaction with bromoacetyl bromide, and one or two isomeric heterocycles were found to form. Further studies indicated that the reaction could be easily manipulated by temperature or solvent to effectively control the product distribution. These iminothiozolidinones were characterized by single crystal x-ray analysis. The new reaction was explored in an effort to uncover the factors influencing the control of the isomer formation. Furthermore, these iminothiozolidinones underwent a novel decyclization reaction that resulted in the loss of the parent thiourea connectivity and incorporation of an external nucleophile to yield an aminooxoethylcarbamothionate. The reaction proceeds through a termolecular mechanism. These reactions can be combined to a one-pot reaction series. These compounds share similarities with a class of compounds reported to be known HIV-1 reverse transcriptase inhibitors94. In addition to these new synthetic reactions, work was conducted with a previously developed cyclen thiourea receptor for the anionic dye HPTS and its derivatives50-52. This system was used to develop a cell labeling assay that led to the amplification of fluorescent labeling of target cells through the use of liposomes. Briefly, a dye-ligand conjugate for the glycine receptor was synthesized. Liposomes functionalized with the cyclen receptor were prepared encapsulating Rhodamine B. Confocal microscopy studies demonstrated the binding of the HPTS-ligand to the cell membranes. Addition of the liposomes resulted in quenching of the green fluorescence, indicating binding of the cyclen to HPTS. Subsequent excitation of Rhodamine B showed red fluorescence associated with the cells. The intensity of the red signal was demonstrably higher than for the signal resulting from the binding of the ligand-dye to the receptor. Together, these projects increase the synthetic usefulness of thiourea based small molecules and demonstrate the potential biological applications of related compounds.

Immobilisation of functional entities, such as, enzymes, onto solid supports, as a means of facilitating their removal from the surrounding environment and subsequent regeneration has been in practice for many decades. This work focuses on the immobilisation and analysis of three-walled (pendant armed), cyclen based receptor complexes immobilised onto a silica surface for the purpose of sequestering aromatic anions from aqueous solution: Si-GPS-[Cd(Trac)](ClO4)2, Si-GPS-[Cd(DiPTrac)](ClO4)2, and Si-GPS-[Cd(TriPTrac)](ClO4)2 were the immobilised receptors used. Initially, synthesis of a three-walled model receptor, [Cd(TracHP12)](ClO4)2, that is not bound to silica yet mimics the properties of the silica anchored receptor complexes with a hydroxypropyl pendant arm was effected. Aromatic anion binding constant measurements were made on the model receptor using 1H NMR monitored titrations in DMSO-d6 which showed that, in comparison to the first generation four-walled receptors, the removal of one of the pendant arms did not affect the binding capability of the receptor's cavity significantly. It was shown that the binding strength correlated well with the pKa of the particular anion with, for example, p-hydroxybenzoate > m-hydroxybenzoate > o-hydroxybenzoate. The precursor to this receptor was then immobilised onto a silica surface and subjected to metal ion uptake studies to gauge its coordination properties with a number of divalent metal(II) ions: Cd(II), Pb(II), Zn(II), Cu(II) and Ca(II). The three Cd(II) coordinated receptor complexes mentioned above were then subjected to inclusion studies with a number of aromatic anions in aqueous conditions whereupon a reversal of the previously mentioned trend, i.e. o-hydroxybenzoate > m-hydroxybenzoate > p-hydroxybenzoate was observed. This indicated that the presence of water in the system changes the hydrogen bonding mode of the host-guest complexes, and was a major discovery arising from this work.

Simple and novel nuclease models have been synthesized. These involve metal-binding ligand 1,4,7,10-tetraazlcyclododecane (cyclen) tethered to an acridine ring (a DNA-binding group) by amide linkers of various lengths. Binding of these probes to DNA was studied by monitoring changes in their UV-visible spectra affected by the presence of DNA. Titration of these compounds with increasing amounts of pBR322 DNA caused hypochromic effects and shifted the acridine absorption at 360nm to a longer wavelength. Under biologically relevant conditions (37°C and pH 7.4), specific transition metal complexes of these compounds are found to be highly effective catalysts toward the hydrolysis of plasmid DNA. This is demonstrated by their ability to convert the super-coiled DNA (form I) to open-circular DNA (form II). Structure-activity correlation studies show that hydrolytic activity depends on both the structure of ligand (L1>L2>L3) and the nature of metal ion cofactor (Co3+>Zn2+>Cr2+>Ni2+>Cu2+>Fe3+).

Polyheterocycles such as polythiophene and its derivatives comprise an important class of conducting polymers used for electronic applications. They have been of great interest for use in electronic materials due to their increased environmental stability as well as novel electronic properties in their polymer states. We have been interested in exploring the electronic properties of organometallic analogues of the low-band-gap polymer poly(benzo[3,4-c]thiophene) (polyisothianaphthene) that incorporates η5-cyclopenta[c]thienyl monomers such as ferroceno[c]thiophene. First chapter of this dissertation involved synthetic attempts to ferroceno[c]thiophene. Exploring a shorter synthetic route to starting material, 1,2-di(hydroxymethyl)ferrocene was the first task. This was followed by attempts to synthesize an important precursor, 1,3-dihydroferroceno[c]thiophene to our target molecule, ferroceno[c]thiophene. In order to achieve our target precursor molecule, 1,3-dihydroferroceno[c]thiophene, we reacted 1,2-di(hydroxymethyl)ferrocene with H2S/H2SO4 and Na2S/HBF4 respectively. Reaction of 1,2-di(hydroxymethyl)ferrocene with either H2S/H2SO4 or Na2S/HBF4 results in 2,16-dithia[3.3](1,2)ferrocenophane instead of monomeric 1,3-dihydroferroceno[c]thiophene. Dehydration of 1,2-di(hydroxymethyl)ferrocene with dilute H2SO4 resulted in 2,16-dioxa[3.3](1,2)ferrocenophane. Formation of the five-membered tetrahydrothiophene or tetrahydrofuran rings is probably disfavored compared to formation of the ten-membered ferrocenophane rings because of greater strain in the five-membered rings. Thus, in order to achieve our target molecule ferroceno[c]thiophene, we took an alternate route. We decided to pursue the route with 1,4-dihydro-2,3-ferrocenodithiin being the precursor to our final target molecule. This was successfully accomplished. 1,2-Di(hydroxymethyl)ferrocene reacts with thiourea in the presence of catalytic trifluoroacetic acid to give a water-soluble thiouronium salt, which reacts with aqueous potassium hydroxide in air to give 1,4-dihydro-2,3-ferrocenodithiin, via oxidation of the intermediate 1,2 di(mercaptomethyl)ferrocene. 1,4-dihydro-2,3-ferrocenodithiin, an important precursor to our desired heterocyclic chemistry was synthesized. The increased emission of CO2, a greenhouse gas, to the atmosphere is a matter of serious worldwide concern. Every year a few gigatons of CO2 are added to the atmosphere by various anthropogenic activities like burning of fuel for electricity, running industry and transportation. Thus, developing ways to reduce the emission of CO2 to the atmosphere is of major importance. Although the amine-based absorption method is considered the most reliable, it is an expensive alternative. The catalyzed enhancement of CO2 absorption is a critical component to reduce the capital cost of CO2 capture. Specifically, an effective catalyst will increase the CO2 hydration rate, thereby decreasing the size of the absorber tower needed. In biological systems, CO2 hydration is catalyzed by the enzyme carbonic anhydrase, which contains ZnII in its active site. Carbonic anhydrase typically is not stable enough to be used in an industrial process, therefore, there is a need to synthesize robust, inexpensive CO2 hydration catalysts. Majority work of this dissertation focuses on designing catalysts that show high CO2 hydration rate similar to carbonic anhydrase while showing superiority towards temperature, pH and inhibitors. We focused our efforts on complexes of Zn, Cu and Co with ligands such as 1,4,7,10-tetraazacyclododecane (cyclen), 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (teta and tetb), tris(benzimidazolylmethyl)amine (BIMA) and anionic tris(pyrazolylborate)s that mimic the enzyme, carbonic anhydrase. Several of these complexes have been reported for their interesting CO2 capture properties but they contain hazardous perchlorate ion. We desired to replace them with benign, non-coordinating counterions like PF6-, BF4-, Cl-, CH3COO-, NO3-, CF3SO3-, SiF62- that avoid the potentially explosive perchlorate salts. In order to test the activity of synthesized catalysts under industrial capture conditions, we designed a quick experimental screening pH drop method. [[Zn(cyclen)(H2O)][SiF6]•2H2O as well as a number of other catalysts have been synthesized and tested for their post-combustion CO2 capture enhancement capabilities in aqueous solvent mixtures under both pH-drop screening and stopped-flow conditions. [Zn(cyclen)(H2O)][SiF6]•2H2O, which has an unreactive counteranion, is found to catalyze CO2 hydration in aqueous solvent mixtures under both pH-drop screening and stopped-flow conditions. However, under pH-drop which has conditions similar to industrial post combustion capture, activity of Zn(cyclen)(H2O)][SiF6]•2H2O drops as compared to observed in stopped-flow conditions probably because of bicarbonate coordination to Zn active site in these systems. The Zn center is highly electron deficient and therefore easily coordinates anions, inhibiting the ability to reform hydroxyl species on the metal. Thus, we decided to test the catalysis of benchmark enzyme carbonic anhydrase under similar conditions to determine the threshold value. Carbonic anhydrases catalyze the hydration of carbondioxide at ambient temperatures and physiological pH with the highest known rate constant= 106 M–1 s–1, but in our system (CAER pH drop screening) came out to be 438797 M–1 s–1. The lower catalytic rate constant for carbonic anhydrase in 0.1000 M K2CO3, similar to Zn-cyclen, strengthens the conjecture that at high bicarbonate concentrations, HCO3– binding to the Zn(II) active site slows catalysis by inhibiting bicarbonate displacement with water to regenerate the active species. The complexes containing anionic ligands that donate electron density into the metal center may serve to remove anionic bicarbonates/carbamates from the secondary coordination sphere and away from the metal center, thereby facilitating bicarbonate/anion dissociation and increasing CO2 hydration rates. We studied catalysis of trispyrazolylborate molecule in 30% MEA and found the molecule to be catalytically active. We also developed an NMR-based method to see if the coordination of solvents to CO2 capture solvents can be studied.

No description available.

Influenza A (IVA) continues to pose a growing global threat even as current medications are becoming less effective. One of the main avenues of research into new anti-IVA drugs is its homotetrameric Matrix 2 proton channel (M2A), without which the virus would be unable to release its viral RNA into the host cell. The drug amantadine used to bind and block M2A until near-ubiquitous resistance formed as an M2A-S31N mutation, starting around 1995 and proceeding to 2005 when amantadine was disallowed for use as an anti-IVA drug. The standard organic structure currently being used for M2A inhibitor research comprises an adamantyl foot group, a heterocyclic aryl body group, and a cyclic head group. A sample set of compounds with this standard structure was compared and reviewed, focusing on positive and negative moieties and modifications. Modifications on the foot group were all more or less detrimental, body groups with two heteroatoms were advantageous, and larger head groups appeared better. Four other scaffolds known to literature were proposed for further study due to beneficial aspects of each. Where most anti-M2A research deals exclusively with organic compounds, metals and their potential in drugs have been almost entirely ignored due to the increased toxicity they bring. Free copper was found in past research to be the only first-row transition metal to show significant M2A-inhibitory activity, proposed to do so by binding the H37 cluster that acts as a pH-dependent control switch for the channel. Six overall-neutral copper complexes were synthesized as a combination of amantadine, cyclooctylamine, and null scaffolds with two of either acetate or acetamide arms as chelators. The complexes were found to block both M2A-WT and M2A-S31N. Along with CuCl¬¬2, though, they had little to no effect on M2A-H37A, providing confirming evidence that the copper binds at the H37 tetrad. Only one complex, Cu(cyclooctylamineiminodiacetate), outperformed CuCl2 in channel block studies and efficacy against two IVA strains, but all of the complexes were found to have lower cytotoxicity. Because M2-H37 is highly conserved, these complexes show promise for further testing against all strains of influenza A. Five net-divalent copper complexes were then synthesized with multiple aza or amine groups as chelators. The complexes failed to show any significant activity against M2A, however, which was thought to be due to size or polarity rejection or electromagnetic repulsion. One of the ligands, though, an adamantyl derivative of a tetraaza macrocycle, was a novel compound, and its copper complex, along with two others, were unknown to the CCDC database. The three complexes were characterized by X-ray diffraction and discussed.

Influenza A (IVA) continues to pose a growing global threat even as current medications are becoming less effective. One of the main avenues of research into new anti-IVA drugs is its homotetrameric Matrix 2 proton channel (M2A), without which the virus would be unable to release its viral RNA into the host cell. The drug amantadine used to bind and block M2A until near-ubiquitous resistance formed as an M2A-S31N mutation, starting around 1995 and proceeding to 2005 when amantadine was disallowed for use as an anti-IVA drug. The standard organic structure currently being used for M2A inhibitor research comprises an adamantyl foot group, a heterocyclic aryl body group, and a cyclic head group. A sample set of compounds with this standard structure was compared and reviewed, focusing on positive and negative moieties and modifications. Modifications on the foot group were all more or less detrimental, body groups with two heteroatoms were advantageous, and larger head groups appeared better. Four other scaffolds known to literature were proposed for further study due to beneficial aspects of each. Where most anti-M2A research deals exclusively with organic compounds, metals and their potential in drugs have been almost entirely ignored due to the increased toxicity they bring. Free copper was found in past research to be the only first-row transition metal to show significant M2A-inhibitory activity, proposed to do so by binding the H37 cluster that acts as a pH-dependent control switch for the channel. Six overall-neutral copper complexes were synthesized as a combination of amantadine, cyclooctylamine, and null scaffolds with two of either acetate or acetamide arms as chelators. The complexes were found to block both M2A-WT and M2A-S31N. Along with CuCl¬¬2, though, they had little to no effect on M2A-H37A, providing confirming evidence that the copper binds at the H37 tetrad. Only one complex, Cu(cyclooctylamineiminodiacetate), outperformed CuCl2 in channel block studies and efficacy against two IVA strains, but all of the complexes were found to have lower cytotoxicity. Because M2-H37 is highly conserved, these complexes show promise for further testing against all strains of influenza A. Five net-divalent copper complexes were then synthesized with multiple aza or amine groups as chelators. The complexes failed to show any significant activity against M2A, however, which was thought to be due to size or polarity rejection or electromagnetic repulsion. One of the ligands, though, an adamantyl derivative of a tetraaza macrocycle, was a novel compound, and its copper complex, along with two others, were unknown to the CCDC database. The three complexes were characterized by X-ray diffraction and discussed.