Numerical simulations were performed to study the turbulent mixing of a scalar species in straight tube, single and double elbow flow configurations. Different Reynolds Averaged Navier Stokes (RANS) and Large Eddy Simulation (LES) models were used to model the turbulence in the flow. Conventional and dynamic Smagorinsky sub-grid scale models were used for the LES simulations. Wall functions were used to resolve the near wall boundary layer. These simulations were run with both two-dimensional and three-dimensional geometries. The velocity and tracer gas concentration Coefficient of Variations were compared with experimental results. The results from the LES simulations compared better with experimental results than the results from the RANS simulations. The level of mixing downstream of a S-shaped double elbow was higher than either the single elbow or the U-shaped double elbow due to the presence of counter rotating vortices. Penetration of neutralized and non-neutralized aerosol particles through three different types of tubing was studied. The tubing used included standard PVC pipes, aluminum conduit and flexible vacuum hose. Penetration through the aluminum conduit was unaffected by the presence or absence of charge neutralization, whereas particle penetrations through the PVC pipe and the flexible hosing were affected by the amount of particle charge. The electric field in a space enclosed by a solid conductor is zero. Therefore charged particles within the conducting aluminum conduit do not experience any force due to ambient electric fields, whereas the charged particles within the non-conducting PVC pipe and flexible hose experience forces due to the ambient electric fields. This increases the deposition of charged particles compared to neutralized particles within the 1.5” PVC tube and 1.5” flexible hose. Deposition 2001a (McFarland et al. 2001) software was used to predict the penetration through transport lines. The prediction from the software compared well with experiments for all cases except when charged particles were transported through non-conducting materials. A Stairmand cyclone was designed for filtering out large particles at the entrance of the transport section.

Thesis (M.S.)--University of Utah, 2000. / "FY00-246." Title from web page (viewed Nov. 13, 2003). Includes bibliographical references (p. [118]-122). Also available in print version.

Cotton gins have a readily available supply of biomass that is a by-product of cotton ginning. A 40 bph - cotton gin processing stripped cotton must manage 2,600 to 20,000 tonnes of cotton gin trash (CGT) annually. CGT contains approximately 16.3 MJ/kg (7000 Btu/lb.). CGT has the potential to serve as a renewable energy source. Gasification of biomasses such as CGT can offer processing facilities the opportunity to transform their waste biomass into electricity. The gasification of CGT yields 80% synthesis gas (syngas) and 20% biochar. The concentration of biochar in the syngas needs to be reduced prior to the direct fueling of an internal combustion engine driving a generator for electricity production. It was estimated that direct fueling of an internal combustion engine with syngas to drive the generator to produce electricity would cost $1M per megawatt (MW). In contrast, a 1MW system that consists of a boiler and steam turbine would cost $2M/MW. The current provisional patent for the TAMU fluidized bed gasification (FBG) unit uses a 1D2D and 1D3D cyclone for the removal of biochar. A cyclone test stand was designed and constructed to evaluate cyclone capture efficiencies of biochar. A statistical experiment design was used to evaluate cyclone performances for varying concentrations of biochar. A total of 24 tests for the 1D2D and 36 tests for the 1D3D cyclone were conducted at ambient conditions. Average collection efficiency for the 1D2D cyclone was 96.6% and 96.9% for the 1D3D cyclone. An analysis on the cyclone’s pressure drop was performed to compare the change in pressure drop from air only passing through the cyclone and when the cyclones are loaded with biochar. The average change in pressure drop for the 1D2D cyclone was a decrease of 74%, and the average change in pressure drop for the 1D3D cyclone was a decrease of 36%. An economic feasibility study was conducted to determine the price per kWh to produce electricity for a CGT fueled internal combustion engine power plant (ICPP) and a boiler and steam turbine power plant (SPP). The simulated cotton gin is a 40 bph rated facility operating for 2,000 hours a season (200% utilization) processing stripped cotton that yields approximately 180 kg/bale (400 lbs/bale) of CGT. Revenues consist of the electricity and natural gas expenses incurred during the ginning season, along with the extra electricity produced and sold back to the utility company at the whole price. Loan payments and operating costs include labor, maintenance, taxes, and insurance. Labor costs, the selling price of electricity and biochar are varied in the economic model. The ICPP has a NPV of $1,480,000, and the SPP has a NPV of -$160,000, under the base assumptions. The sensitivity analysis resulted in the selling price of electricity as having the largest change on the NPV for both of the power plants. The average predicted purchase price of electricity is $0.10/kWh for the twenty year simulation. The average price to produce electricity, with no source of revenue generation for the ICPP is $0.20/kWh and $0.26/kWh for the SPP.

No description available.

Thesis (M.S.)--Florida State University, 2005. / Advisor: Dr. Carol Anne Clayson, Florida State University, College of Arts and Sciences, Dept. of Meteorology. Title and description from dissertation home page (viewed June 28, 2005). Document formatted into pages; contains x, 62 pages. Includes bibliographical references.

Thesis (M.S.)--Florida State University, 2004. / Advisor: Dr. T.N. Krishnamurti, Florida State University, College of Arts and Sciences, Dept. of Meteorology. Title and description from dissertation home page (viewed June 18, 2004). Title and description from dissertation home page (viewed <date>). Includes bibliographical references.

Thesis (M.S.)--Brigham Young University. Dept. of Electrical and Computer Engineering, 2006. / Includes bibliographical references (p. 83-85).

Thesis (M.S. in Meteorology and Physical Oceanography)--Naval Postgraduate School, June 2005. / Thesis Advisor(s): Patrick Harr. Includes bibliographical references (p. 95-96). Also available online.

Thesis (Ph. D.)--University of Wisconsin--Madison, 1982. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 191-195).

Thesis (M.S.)--Florida State University, 2006. / Advisor: Robert Hart, Florida State University, College of Arts and Sciences, Dept. of Meteorology. Title and description from dissertation home page (viewed Sept. 26, 2006). Document formatted into pages; contains xiii, 98 pages. Includes bibliographical references.