Spelling suggestions: "subject:"ddc motor""
91 |
Regulátor otáček pro střídavé motory / Controler for brushless motorsZdařil, Tomáš January 2011 (has links)
The goal of the thesis was to design and create one-way speed controler for brushless DC motors, that is used in air modeling. The function is based on the without sensors control method and circuit is controlled by the Atmel AVR. Power unit for motor is used Li – pol accumulator. The controller is equipped with a BEC to power the receiver and allows monitoring current and voltage on the accumulator. The measured data can be uploaded to a PC.
|
92 |
Návrh synchronního stroje s permanentními magnety / Design of permanent magnet synchronous motorsBureš, Petr January 2018 (has links)
Given today’s trend with environment being very important, there has been an ongoing attempt in the rotating machine industry to create machines with highest efficiency possible. And so, permanent magnet synchronous machines represent types of machine with very high efficiency and are gradually replacing other machines in many applications. This work deals with familiarization of the properties of permanent magnet synchronous motor as well as typical design choices. The main focus of this work is the design of permanent magnet EC motor and following comparison of results obtained from analytical design and analysis in the RMxprt program. Finally, the results of design methods are compared.
|
93 |
Zařízení pro testování malých elektrických motorů a lineárních aktuátorů / Testing equipment for small electrical motors and linear actuatorsČervínek, David January 2018 (has links)
Aktuální postup testování je příliš zdlouhavý a nepřesný, zároveň není měření některých vlastností motoru vůbec možné. Hlavním úkolem zařízení je zrychlení a zjednodušení procesu testování spolu s možností otestovat všechny vlastnosti motorů. Realizace zařízení začala definováním požadavků zákazníka, dalším krokem byla analýza daných požadavků a návrh zařízení. Následovala výroba a programovaní firmwaru spolu se softwarem. Výsledkem práce je funkční přístroj schopný automatického testování sedmi základních typů motorů, měření všech požadovaných funkcí spolu s novou možností měření počtu tiků enkodéru, periody FG signálu z řídící elektroniky BLDC motorů a napěťové úrovně těchto signálů. Dalšími rozšířeními jsou možnost uložení výsledků z uskutečněných testů pro možné budoucí využití a možnost vizualizace proudu motorem. Uživatel je tedy schopný otestovat velké množství motorů v kratším časovém úseku a zároveň se o testovaných motorech dozvědět mnohem více informací než doposud.
|
94 |
Automatické ladění regulátoru pro DC motor / Automatic tuning of the DC motor controllerTran, Adam January 2018 (has links)
Diploma thesis deals with designing of algorithmus for automatic controller tunning for DC motors. Automatic tuning function consist of system identification and controller parametrization. Cascade control loop was chosen for its robustness and proper DC motor control. For electric system identification of DC motor was used recursive method of instrumental variables, because of noisy signal from current transducer. In the case of identification mechanical system, there were used least sqares method. According to identified parameters, current controller was parametrized by optimum module and revolution controller according symetrcal optimum.
|
95 |
Návrh komplexního HIL simulátoru pátých dveří automobilu / Design of a complex HIL simulator of car boot doorObrtáč, Tomáš January 2019 (has links)
This thesis covers the development of complex HIL simulator for the fifth car door. The beginning of the thesis is dedicated to theoretical research in the area of In-the-Loop testing. Practical part describes development of HIL simulator complemented by power electronics part. A simulation environment Matlab/Simulink was used for control design and analysis. Before the beginning of the work was measured signal part of control unit and specific signal sequences were identified. The control was applied on sbRIO device from National Instruments company with the implementation of a model on FPGA. Specific requirements for sensing speed and generation of communication signals lead to creation of unique hardware for application needs. The result of the thesis is complex HIL simulator with intuitive GUI and possibility of simulations a wide range of DC motors.
|
96 |
Model laboratorního pohonu pro výukové účely / Model of Laboratory Testbench for Educational PurposesJanuška, Adam January 2020 (has links)
This thesis is focused on simulation of laboratory stand located on University of technology in Brno which is containing DC and asynchronous motor. This thesis includes mathematical model of DC motor, regulator of current, regulator of speed and DC convertor. It also contains model of asynchronous squirrel cage motor and models for scalar and vector control. Whole simulation is calculated in Simulink which is part of program Matlab.
|
97 |
Regulátor pohonu opony / Curtain Drive ControlVečerník, Jan January 2008 (has links)
Master's thesis describes and proposes solutions for a given problem of a drive in theater curtain DS Krakonoš - Vysoké nad Jizerou using modern microcontroller with voltage transducer.. There is given a detailed analysis of the problem, including the mathematical description of the entire system, then design and its subsequent implementation. The goal of this work is designed to apply a device designed to the engine, which moves theater curtain.
|
98 |
Regulátor otáček pro střídavé motory / Controler for brushless motorsZdařil, Tomáš January 2012 (has links)
The goal of the thesis was to design and create one-way speed controler for brushless DC motors, that is used in air modeling. The circuit is controlled by the Atmel AVR. As power unit for motor is used Li–pol accumulator. The controller is equipped with BEC to power the receiver and allows monitoring of current consumption and voltage on the accumulator. Measured data can be upload to a PC where they can be displayed by RegulatorPC in graphical form.
|
99 |
Bezsensorové řízení BLDC motoru / Sensorless control of BLDC motorKrižan, Jakub January 2012 (has links)
This thesis is focused on problematics of control of brushless DC motor in the sensor and also in the sensorless mode. Also it interprets possibilities of BLDC motor control with one faulty sensor and derivation and simulation of mathematical model. First part mentions options of rotor position sensing as well as existing methods of sensorless BLDC motor control. Second part describes control algorithms of sensor and sensorless motor control realised on device dSPACE and also realisation of faulty sensor control algorithm. Third part deals with derivation of mathematical model, its realisation using Matlab Simulink software and identification of its parameters. Last part concludes results and compares control methods used on the real system.
|
100 |
Návrh dvoukolového autonomního robota / A proposal for two wheeled autonomous robotHess, Lukáš January 2013 (has links)
The goal of this diploma thesis is a proposal of autonomous two wheeled balancing robot, differentially driven. This kind of robot is especially suitable in confined space, where it can utilize its maneuver skills. Many criteria as operational conditions, materials, size and weight of the robot, suitable hardware and sensors must to be considered, when designing the robot. Development and implementation of autonomous balancing control system is also part of the thesis.
|
Page generated in 0.0618 seconds