Thesis (Ph. D.)--University of Washington, 2003. / Vita. Includes bibliographical references (leaves 70-77).

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km² (411-mi²) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration. / text

This study aims at uncovering the formation mechanism of the recent bright gully deposits observed on Mars in order to assess the viability of liquid water involvement. I use a high resolution topography model as input into a kinematic model to assess whether or not a dry granular flow could form the bright gully deposits seen in Hale Crater. I investigate a dry mechanism due to the difficulty of producing water on the martian surface under present-day pressure and temperature conditions. I examine a range of particle sizes, flow thicknesses, and upslope initiation points to examine how these parameters affect the run-out distances of flows. The results show that multiple combinations of parameters could produce flows that travel to within the observed deposits' boundaries. The results suggest that the recent bright gully deposits are not evidence of recent liquid water on the surface of Mars.

Debris flows in the southern Coast Mountains exhibit different dynamic and sedimentologic characteristics, depending on the lithology of their source areas. Fine-textured debris flows originating in the Quaternary volcanic complexes are much more mobile than those originating in the coarse-textured plutonic rocks which form most of this mountain range. Mobility can be described as the velocity of flow, the distance of travel of debris flows, and the slope required to sustain flow. The objectives of this study are to examine the effect of different sediment composition on the mobility of debris flows, and to determine which rheologic models are most applicable for modeling debris flows in these geologic environments. About 25 debris flow events in or adjacent to the southern Coast Mountains were examined, ranging in volume from 10² m³ to over 10⁷ m³. Field methods included sampling of grain-size distribution, measurement of the deposit and channel dimensions, and observation of the stratigraphy of debris flow fans. Shear strength, permeability, and consolidation tests were performed on samples of reconstituted debris, representative of typical fine-textured and coarsetextured debris flows. These samples were also used to model debris flows in a flume. The coarse-textured, plutonic-source, debris flows typically had a distinct, inverselygraded, clast-supported, surface layer of cobbles and boulders. Their deposits tended to be irregular in thickness, with lobes and levees of coarse material. The fine-textured, volcanicsource, debris flows had no such surface layer, and their deposits were generally uniform in thickness and surface morphology. These observations, and corroborating evidence from the flume results, suggest that fine-textured debris flows behave according to the Bingham flow model, while coarse-textured debris flows can be better described by a granular, or dilatant, flow model. A clay content of about 4% in the matrix (sub-4 mm material) is a useful measure to distinguish the two populations. Several debris flow events of intermediate behaviour and sediment composition were also examined. The permeability of the debris, and hence its rate of consolidation, is an important factor controlling mobility. The volume of debris flow events was found to be the most significant factor controlling runout distance.

Satellite capabilities greatly enhance both the military and civilian sectors of society. Anti-satellite (ASAT) weapons pose a serious risk to all satellites. Chapter One of this thesis discusses current satellite capabilities. Chapter Two, details the wide variety of ASAT weapons. Chapter Three turns to the intentions of various States to employ ASATs. Chapter Four analyzes the legal implications of using force against satellites---beginning with the laws relating to the use of force in general, including the right of self-defense, and then progressing through relevant provisions of the laws of armed conflict. It also addresses the debate over the militarization and weaponization of outer space and past efforts at non-proliferation that relate to space activities. Chapter Five addresses the creation of space debris---a side effect of ASAT use. I will conclude with a short discussion regarding the potential for a new international agreement restricting the use of ASATs.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

Understanding the impact of coastal forests on the propagation of rapidly advancing onshore tsunami bores is difficult due to complexity of this phenomenon and the large amount of parameters which must be considered. The research presented in the thesis focuses on understanding the protective effect of the coastal forest on the forces generated by the tsunami and its ability to reduce the propagation and velocity of the incoming tsunami bore. Concern for this method of protecting the coast from tsunamis is based on the effectiveness of the forest and its ability to withstand the impact forces caused by both the bore and the debris carried along by it. The devastation caused by the tsunami has been investigated in recent examples such as the 2011 Tohoku Tsunami in Japan and the Indian Ocean Tsunami which occurred in 2004. This research examines the reduction of the spatial extent of the tsunami bore inundation and runup due to the presence of the coastal forest, and attempts to quantify the impact forces induced by the tsunami bores and debris impact on the structures. This research work was performed using a numerical model based on the Smoothed Particle Hydrodynamics (SPH) method which is a single-phase three-dimensional model. The simulations performed in this study were separated into three sections. The first section focused on the reduction of the extent of the tsunami inundation and the magnitude of the bore velocity by the coastal forest. This section included the analysis of the hydrodynamic forces acting on the individual trees. The second section involved the numerical modeling of some of the physical laboratory experiments performed by researchers at the University of Ottawa, in cooperation with colleagues from the Ocean, Coastal and River Engineering Lab at the National Research Council, Ottawa, in an attempt to validate the movement and impact forces of floating driftwood on a column. The final section modeled the movement and impact of floating debris traveling through a large-scale model of a coastal forest.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.