One of the primary objects of this research was to determine, if possible, the nature of the radiation damage prior to thermal decomposition. The X-ray study has not wholly achieved this although more information has been derived from it than from similar work on AgMnO₄ However, the diffuse reflections obtained do indicate, quite strongly, the creation of point defects during irradiation. This is of value since such assumptions have been made in the explanation of the kinetics of decomposition of a number of irradiated solids (BaN₆,CaN₆). In addition the X-ray work has suggested future research which should produce useful information; namely, a precise study of the diffuse reflections. Another object of the research was to attempt to determine what characteristics, if any, of the kinetics of the decomposition of an unirradiated solid would predetermine a marked irradiation effect. It is obvious that the type of nuclear growth which occurs e.g. branching chain, or power law, does not characterise a substance with regard to a possible irradiation effect . The photosensitivity, or otherwise, also does not determine whether there will be an irradiation effect. However, the one property that the substances which have been studied, have in common, is a polyatomic anion, but here again ammonium dichromate does not show an acceleration of the decomposition after irradiation. Consequently it is considered that it is not possible to say, a priori, whether a solid will undergo an accelerated decomposition after irradiation. Each new solid, unless it belongs to a particular class e.g. the alkaline earth azides , must be considered afresh. Nevertheless it does appear that the irradiation effect can take two forms: - (i) the production of an unstable compound e.g. nickel oxalate, the decomposition of which affects the normal pyrolysis; and (ii) the production of point defects which determine the nature of the subsequent thermal decomposition e.g . CaN₆ . It is possible that the effect requires an interaction of the created point defects with the existing line defects.

[From Introduction] The first step in the study of the thermal decompositions of solids is an examination of the kinetics, since this casts much light on the mechanism of the reaction. It must be borne in mind, however, that a theoretical expression, derived on the basis of a particular mechanism, even if it fits the observed experimental results, is not conclusive proof of the validity of the mechanism when applied to the decomposition under examination.

Methods of determining the aqueous solubilities of twelve chlorinated benzenes were evaluated in pure and in different water matrices. In pure water, results were comparable with the calculated values. Higher chlorinated tetrachlorobenzenes (TeCBs), pentachlorobenzenes (PCBz), and hexachlorobenzenes (HCBs) gave better precision and accuracy than lower chlorinated monochlorobenzenes (MCBs), dichlorobenzenes (DCBs), or trichlorobenzenes (TCBs).

Three different species of fish (sea trout, Spanish mackerel and catfish) were studied. Samples undergoing normal spoilage were compared with samples which had undergone a sanitizing treatment with alcohol. Differential temperature storage studies were conducted at 290 °F (-1.7 °C) and 32 °F (0 °C). Fish quality was assessed by means of microbiological, chemical and sensory analyses. Quality assessment via measurement of proteolytic and lipolytic enzymes was attempted, but these enzyme activities were not detected in any of the samples. It was not possible to differentiate between the contributions of microbial and autolytic spoilage. Alcohol treated samples (reduced numbers of microorganisms) had shelf-lives extended by 6-10 days over untreated samples. The shelf-life of samples stored at 290 °F was extended by 6-10 days over the shelf-life of samples stored at 32 °F. Treated samples stored at 290 °F received highest sensory scores and untreated samples stored at 320 °F received the lowest scores. It was seen that the three fish species studied had different shelf-lives: sea trout-6 days, Spanish mackerel - 10 days and catfish - 16 days. Decomposition rates differed significantly between species and this factor must be taken into account when marketing strategies are developed by firms engaged in fresh fish sales. / Master of Science

Master of Science

<div>For decades, the response of high-energy (HE) density materials at extreme conditions of pressure and temperature from strong insults like burning or impact have been studied in depth by the shock community. Shock physicists aim to develop a fundamental understanding for coupled chemical and physical processes across orders of magnitude spatial and temporal regimes. In order to succeed, this requires extensive collaboration between experiments and simulations, ranging from the electronic to the engineering scales. The end goals would be to develop predictive multiscale models capable of explaining ignition and initiation of HE systems and composites. The collected works in this thesis detail my contributions to the field of HE materials, specifically addressing the chemical reactivity at the atomistic level using reactive molecular dynamics (MD) simulations.</div><div><div>Through this endeavor, we aim to develop a critical understanding for the decomposition processes of HE materials. We begin with a validation the reactive force field, ReaxFF, by addressing the very strong anisotropic shock sensitivity in 2,2-Bis[(nitrooxy)methyl]propane-1,3-diyl dinitrate (PETN) through direct comparison of time-evolved spectra between experiments and simulations. Such strong orientation dependence is thought to relate to the initial decomposition events. Therefore we compare spectra at three different shock pressures, where we observe similar timescales for the disappearance of the NO2 symmetric and antisymmetric stretch modes. A more detailed chemical species analysis indicates that the NO2 molecular species could be considered the primary intermediate which initiates the decomposition process. Furthermore, these results suggest that the combination of explicit MD simulations and ultrafast spectroscopy will be key to the development of a detailed understanding of chemistry at extreme conditions.</div></div><div><div>Following the validation study, we further our understanding of reactivity in HE systems by investigating the differences in kinetics between an ordered and disordered system. It has been shown that shocked material is often severely strained, causing a loss in crystalline order. This in turn results in the disordered materials, such as amorphous solids, having</div><div>faster reactivity due to their higher internal energy and/or lower thermal conductivity. Our results indicate that extra energy is required to break the long-range order in bulk crystalline systems, thus resulting in slower decomposition rates. Further analyses of thermal hotspots point towards slightly faster chemical propagation in the amorphous samples due to lower thermal conductivity. These results provide an understanding for how molecular disorder can be attributed to increased reactivity.</div></div><div><div>After developing an understanding for the initial decomposition processes of HE materials, we turn our attention to a growing interest in the community which is the developing reduced order chemistry models for use in multiscale efforts. Many schemes report mechanisms that are obtained from experiments, which can have large error bars depending on the apparatus and/or extraction technique, or from gas phase simulations, which may not be relevant at shock conditions. To circumvent these issues, we develop a coarse-grained chemical kinetics model from all-atom reactive MD simulations by taking advantage of an unsupervised dimensionality reduction machine learning technique called non-negative matrix factorization. Doing so allows us to represent the overall decomposition chemistry as latent concentrations akin to reactants, intermediates, and products, which we then use to extract kinetics parameters and heats of reaction. These values are implemented into a continuum model, where we could simulate the criticality of thermal hotspots at regimes beyond the reach of MD, as well as verify how uncertainties in the parameters vary as a function of hotspot sizes.</div></div><div><div>Finally, we close with significant progress made towards on-going and future work, where we address two of the most challenging ideas in the field of HE materials: 1) developing definitive chemistry models at extreme conditions, and 2) improving coarse-grained descriptions for multiscale modeling.</div></div>