The exciton diffusion length, which is the distance an exciton can diffuse in its lifetime, is an important parameter that has a critical impact on the operation of many organic optoelectronic devices, including organic solar cells, light emitting diodes and lasers. Knowledge of the exciton diffusion length can be a powerful aid for the design and optimisation of these devices. This thesis details the development of techniques based on time-resolved fluorescence for measuring the exciton diffusion in organic semiconductors. Two main methods were used to investigate exciton diffusion in the conjugated polymers P3HT, MEH-PPV and F8BT: the surface quenching technique and exciton-exciton annihilation. In particular, the surface quenching technique was adapted to avoid some of the potential pitfalls that have plagued earlier measurements. Using a titania quencher, measurements were performed using the surface quenching technique and fitted with an exciton diffusion model, allowing the calculation of the exciton diffusion length. Results from measurements of the exciton-exciton annihilation rate, which is a diffusion controlled process, where in good agreement with those from surface quenching, confirming the robustness of this twofold approach. A novel method for the control of the β-phase conformation in PFO films was used to produce films containing varying concentrations of β-phase. Exciton-exciton annihilation was used to investigate exciton diffusion in these films, revealing a gradual rise with increasing β-phase fraction due to improved interconnectivity. This work demonstrates how simple processing techniques can be used to control both film morphology and the exciton diffusion. The thickness dependence of the photoluminescence lifetime in conjugated polymers is a phenomenon that has so far received little attention and, thus, remained unexplained. This study demonstrates that it is not due to exciton quenching by external factors, but can be explained by a change in the morphology with decreasing film thickness.

This thesis presents studies of exciton diffusion in organic semiconductors measured using exciton-exciton annihilation and the measurements were performed on materials important for organic solar cells. In the conjugated polymer poly(3-hexylthiophene) (P3HT), the effect of molecular weight (4-76 kgmol⁻¹) was explored. Using exciton-exciton annihilation measurements, the highest diffusion coefficient was observed in the intermediate molecular weight region and was correlated with long conjugation lengths, higher fraction of aggregated states and more delocalised excitons within the aggregate. The results demonstrated that the molecular weight dependence is due to a complex relationship between intermolecular interactions, aggregate size and Boltzmann statistics. This thesis also includes an investigation of exciton diffusion in diketopyrrolopyrrole(DPP)-based small molecules as a function of molecular structure. Significant changes in photophysical and exciton diffusion properties were observed due to minor changes in molecular structure. Long conjugation lengths, bulky side chains or reduced steric hindrance due to absence of end alkyl chains correlated with reduced film crystallinity and reduced diffusion coefficients. The increase in disorder observed due to large conformational torsions resulted in inhomogeneous broadening of density of states and as a result exciton diffusion becomes dispersive. In this case, a slowdown of exciton diffusion is observed. This study demonstrates that enhanced exciton diffusion can be achieved by designing more rigid and planar conjugated backbones with smaller conjugation lengths. Finally, exciton diffusion measurements were used to rationalise the performance of T3 truxene oligomers as explosive sensors. Side chain lengths were found to have a subtle influence on exciton diffusion. Time-resolved PL quenching measurements were used to estimate the quencher concentration. Differences in quencher concentration were observed suggesting different interaction strengths of the quencher with the truxene oligomer which help explain the explosive sensing performance.

La technique originale de spectroscopie par saturation d'absorption, dite holeburning spectral, est mise en oeuvre pour étudier l'élargissement homogène de transitions optiques à 1,55 μm dans deux types de nanostructures. Pour les boîtes quantiques GaN/AlN, notre expérience constitue la première mesure directe de la largeur homogène de la transition intrabande s − pz. Des études en puissance démontrent le rôle prédominant des processus Auger dans la relaxation de population des niveaux. Le profil spectral d'absorption homogène s'avère gaussien. La forte augmentation de la largeur homogène entre 5K et 30K suggère des mécanismes de décohérence autres que le couplage aux phonons acoustiques, comme la diffusion spectrale. Dans le cas des nanotubes de carbone, notre dispositif expérimental permet d'étudier finement l'évolution du spectre d'absorption homogène de la transition électronique fondamentale sur une large gamme de puissance et pour des températures allant de 5K à 300 K. Les études en puissance mettent en évidence quantitativement la contribution prédominante de l'élargissement collisionnel et la contribution marginale de la réduction de force d'oscillateur au signal nonlinéaire. Deux processus d'interaction à deux excitons sont analysés : l'annihilation exciton-exciton (EEA) et la diffusion exciton-exciton (EES), et nous révélons la nature hybride Wannier-Frenkel particulière des excitons dans les nanotubes de carbone. Finalement, nous étudions le déphasage assisté par phonons et nous mettons en évidence les caractéristiques du couplage exciton-phonon, liées au caractère unidimensionnel.

This thesis deals with exciton relaxation processes in thin polycrystalline films and matrix-isolated molecules of the perylene derivatives PTCDA (3,4,9,10-perylenetetracarboxylic dianhydride) and MePTCDI (N,N'-dimethylperylene-3,4,9,10-dicarboximide). Using femtosecond pump-probe spectroscopy, transient absorption spectra, excitonic relaxation in the lowest excited state subsequent to excitation, and exciton-exciton interaction and annihilation at high excitation densities have been addressed. Transient absorption spectroscopy in the range 1.2eV-2.6eV has been applied to thin polycrystalline films of PTCDA and MePTCDI and to solid solutions of PTCDA and MePTCDI molecules (monomers) in a SiO2 matrix. We are able to ascribe the respective signal contributions to ground state bleaching, stimulated emission, and excited state absorption. Both systems exhibit broad excited-state absorption features below 2.0eV, with dominant peaks between 1.8eV and 2.0eV. The monomer spectra can be consistently explained by the results of quantum-chemical calculations on single molecules, and the respective experimental polarization anisotropies for the two major transitions agree with the calculated polarizations. Dimer calculations allow to qualitatively understand the trends visible in the experimental results from monomers to thin films. The broad excited state absorption band between 1.8eV and 2.0eV allows to probe the population dynamics in the first excited state of thin films. We show that excitons created at the Gamma point relax towards the border of the Brillouin zone on a 100fs time scale in both systems. Excitonic relaxation is accelerated by increase of temperature and/or excitation density, which is attributed to stimulated phonon emission during relaxation in k-space. Lower and upper limits of the intraband relaxation time constants are 25fs (resolution limit) and 250fs (100fs) for PTCDA (MePTCDI). These values agree with the upper limit for the intraband relaxation time of 10ps, evaluated from time-resolved luminescence measurements. While the luminescence anisotropy is in full accordance with the predictions made by a luminescence anisotropy model being consistent with the exciton model of Davydov-split states, the pump-probe anisotropy calls for an explanation beyond the models presently available. At excitation densities 10^(19)cm^(-3), the major de-excitation mechanism for the relaxed excitons is exciton-exciton annihilation, resulting in a strongly reduced exciton life time. Three different models for the microscopic behavior have been tested: a diffusion-limited annihilation model in both three and one dimensions (with diffusion constant D as fit parameter) as well as a long-range single-step Förster-type annihilation model (with Förster radius RF as fit parameter). For PTCDA, the latter two, being structurally equivalent, allow to fit a set of multiexponential decay curves for multiple initial exciton densities with high precision. In contrast, the three-dimensional diffusion-limited model is clearly inferior. For all three models, we extract annihilation rates, diffusion constants and diffusion lengths (or Förster radii), for both room and liquid helium temperature. Temperature dependence and orders of magnitude of the obtained parameters D or RF correspond to the expectations. For MePTCDI, the 1D and the Förster model are in good agreement for a smaller interval of excitation densities. For a initial exciton densities higher than 5 x 10^(19)cm^(-3), the 3D model performs significantly better than the other two.