Hydrogen has been for some time discussed as a successor to fossil fuels whose stocks are constantly running low. One of the crucial requirements for the possible usage of hydrogen as an energy carrier is our ability of reliable detection. In context with development of organic electronics there occurred a possibility to use derivatives of diketopyrrolopyrroles as sensing materials of hydrogen sensors. Derivatives of diketopyrrolopyrrole are organic pigments that behave as semiconductors. Their analogues with pyridyl side group are due to free electron pairs of nitrogen atoms sensitive to hydrogen. The problem of organic N-type semiconductors is in general their instability on the air. This thesis is focused on testing of hydrogen sensors with active layer made from derivatives of diketopyrrolopyrrole and judging their stability on the air.

Práce je zaměřena na problematiku bezpečnostních vodíkových senzorů. Základní principy a teorie vodíkových senzorů je rozebrána v první části práce. Je navržena metodologie testování organických vodíkových senzorů vyvinutých a vyrobených na Fakultě Chemické Vysokého Učení Technického v Brně. Nejslibnější organický material byl testován. V závěrečné části byl navržen teplotní regulátor pro použití s keramickou senzorovou platformou.

This diploma thesis describes organic pigments of diketopyrrolopyrroles (DDPs) possessing properties applicable in attractive and perspective areas of organic electronics and photonics. The modification of the DPP skeleton was performed by nucleophilic substitution by various alkyl chains and 5 series of DPP derivatives were prepared. The regioselectivity of N-alkylation and also the photophysical properties of the prepared derivatives were studied. A key product of this work is the N,N'-ethyladamantyl derivative of DPP, which exhibited ambipolar characteristic with excellent electron mobility of 0.2 cm2 V–1 s–1. Further, the -conjugation of the above-mentioned DPP derivative was extended by 1 and 2 thiophene units at positions 3,6 and the effect of this modification on optical properties of the resulting derivatives was investigated. A new modified N,N'-unsubstituted DPP derivative was also prepared. The last point of this thesis was the study of the incorporation of formyl functional groups into the skeleton of key N,N'-ethyladamantyl DPP derivative.

I) Introduction p-Conjugated polymers inherently combine electronic properties of inorganic semiconductor crystals and material characteristics of organic plastics due to their special molecular design. This unique combination has led to developing new unconventional optoelectronic technologies and, further, resulted in the evolution of semiconducting polymers (SCPs) as fundamental components for novel electronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and organic solar cells (OSCs).[1–5] Moreover, the material flexibility, capability for thin-film formation, and solution processibility additionally allow utilizing modern printing technologies for the large-scale fabrication of flexible, light-weight organic electronics. This especially enables to significantly increase the production speed and, moreover, to drastically reduce the costs per unit.[6, 7] In particular, transistors are the most important elements in modern functional electronic devices because of acting as electronic switches in logic circuits or in displays to control pixels. However, due to molecular arrangement and interactions, the electronic performance of SCPs cannot compete with the one of monocrystalline silicon which is used in state-of-the-art high-performance microtechnology.[5, 8] Nonetheless, intensive and continuing efforts of scientists focused on improving the performance of OFETs, with the special focus on the charge carrier mobility, by optimizing the polymer structure, processing conditions and OFET device architecture. By this, it was possible to identify crucial relationships between polymer structure, optoelectronic properties, microstructure, and OFET performance.[8] Nowadays, the interdisciplinary scientific success is represented by high-performance SCPs with charge carrier mobilities exceeding the value of amorphous silicon.[3, 9] However, further research is essential to enable developing the next generation of electronic devices for application in healthcare, safety technology, transportation, and communication. II) Objective and Results Within the scope of this doctoral thesis, current high-performance p-conjugated SCPs should be studied comprehensively to improve the present understanding about the interdependency between molecular structure, material properties and charge transport. Therefore, the extensive research approaches focused on different key aspects of high charge carrier mobility polymers for organic transistors. The performed investigations comprised the impact of, first, novel design concepts, second, precise structural modifications and, third, synthetic and processing conditions and led to the major findings listed below. 1. The design concept of tuning the p-conjugation length allows to gradually modulate physical material properties and demonstrates that a strong localization of frontier molecular orbitals in combination with a high degree of thin-film ordering can provide a favorable platform for charge transport in p-conjugated semiconducting polymers.[1] 2. The replacement of thiophene units with thiazoles in naphthalene diimide-based p- conjugated polymers allows to increase interchain interactions and to lower frontier molecular orbitals. This compensates the potentially detrimental enhancement of backbone torsion and drives the charge transport to unipolar electron transport, whereas mobility values are partially comparable with those of the respective thiophene containing analogs. 3. p-Conjugated diketopyrrolo[3,4-c]pyrrole-based copolymers can be synthesized within fifteen minutes what, in combination with avoiding aqueous washings and optimizing processing conditions, allowed an increase in morphological and energetic order and, thus, improved the charge transport properties significantly. III) Conclusion The key findings of this doctoral thesis provide new significant insights into important aspects of designing, synthesizing and processing high charge carrier mobility polymers. By this, they can guide future research to further improve the performance of organic electronic devices - decisive for driving the development and fabrication of smart, functional and wearable next-generation electronics. References [1] T. Erdmann, S. Fabiano, B. Milián-Medina, D. Hanifi, Z. Chen, M. Berggren, J. Gierschner, A. Salleo, A. Kiriy, B. Voit, A. Facchetti, Advanced Materials 2016, 28 (41), 9169–9174, DOI:10.1002/adma.201602923. [2] Y. Karpov, T. Erdmann, I. Raguzin, M. Al-Hussein, M. Binner, U. Lappan, M. Stamm, K. L. Gerasimov, T. Beryozkina, V. Bakulev, D. V. Anokhin, D. A. Ivanov, F. Günther, S. Gemming, G. Seifert, B. Voit, R. Di Pietro, A. Kiriy, Advanced Materials 2016, 28 (28), 6003–6010, DOI:10.1002/adma.201506295. [3] A. Facchetti, Chemistry of Materials 2011, 23 (3), 733–758, DOI:10.1021/cm102419z. [4] A. J. Heeger, Chemical Society Reviews 2010, 39, 2354–2371, DOI:10.1039/B914956M. [5] H. Klauk, Chemical Society Reviews 2010, 39, 2643–2666, DOI:10.1039/B909902F. [6] S. G. Bucella, A. Luzio, E. Gann, L. Thomsen, C. R. McNeill, G. Pace, A. Perinot, Z. Chen, A. Facchetti, M. Caironi, Nature Communications 2015, 6, 8394, DOI:10.1038/ncomms9394. [7] H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W. Wu, E. P. Woo, Science 2000, 290 (5499), 2123–2126, DOI:10.1126/science.290.5499.2123. [8] D. Venkateshvaran, M. Nikolka, A. Sadhanala, V. Lemaur, M. Zelazny, M. Kepa, M. Hurhangee, A. J. Kronemeijer, V. Pecunia, I. Nasrallah, I. Romanov, K. Broch, I. McCulloch, D. Emin, Y. Olivier, J. Cornil, D. Beljonne, H. Sirringhaus, Nature 2014, 515 (7527), 384–388, DOI:10.1038/nature13854. [9] S. Holliday, J. E. Donaghey, I. McCulloch, Chemistry of Materials 2014, 26 (1), 647–663, DOI: 10.1021/cm402421p.

Dizertační práce pojednává o studiu, syntéze a chemické derivatizaci molekul spadajících do skupiny organických vysoce výkonných pigmentů a jejich potenciálním uplatnění v oblastech organické elektroniky. Teoretická část práce je zaměřena na nejnovější trendy v dané oblasti, a to jak z aplikačního potenciálu konkrétních derivátů, tak z pohledu syntetických možností a jejich strukturálních derivatizací. V experimentální části je pak podrobně popsána příprava pestré škály intermediátů a výsledných produktů, zahrnujících deriváty diketopyrrolopyrrolů (DPP), benzodifuranonu (BDF), epindolidionu (EP), naphthyridinedionu (NTD) a polymeru na bázi thiofenu (PT). Celkově bylo nasyntetizováno 103 molekul, přičemž 49 tvořily výsledné produkty, z nichž 27 bylo zcela nových, dosud nepublikovaných. Hlavním motivem derivatizace molekul pigmentů je zde inkorporace derivátů adamantanu do finálních struktur. V další části práce jsou blíže diskutovány jednotlivé chemické modifikace vedoucí k výsledným produktům. Na sérii N,N'-; N,O'- a O,O'-substituovaných derivátů DPP je popsána komplexní studie vlivu charakteru alkylových řetězců a také pozice jejich navázání v molekule DPP, a to nejen na selektivitu reakce, ale rovněž na optické i termické vlastnosti syntetizovaných produktů.

I) Introduction p-Conjugated polymers inherently combine electronic properties of inorganic semiconductor crystals and material characteristics of organic plastics due to their special molecular design. This unique combination has led to developing new unconventional optoelectronic technologies and, further, resulted in the evolution of semiconducting polymers (SCPs) as fundamental components for novel electronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and organic solar cells (OSCs).[1–5] Moreover, the material flexibility, capability for thin-film formation, and solution processibility additionally allow utilizing modern printing technologies for the large-scale fabrication of flexible, light-weight organic electronics. This especially enables to significantly increase the production speed and, moreover, to drastically reduce the costs per unit.[6, 7] In particular, transistors are the most important elements in modern functional electronic devices because of acting as electronic switches in logic circuits or in displays to control pixels. However, due to molecular arrangement and interactions, the electronic performance of SCPs cannot compete with the one of monocrystalline silicon which is used in state-of-the-art high-performance microtechnology.[5, 8] Nonetheless, intensive and continuing efforts of scientists focused on improving the performance of OFETs, with the special focus on the charge carrier mobility, by optimizing the polymer structure, processing conditions and OFET device architecture. By this, it was possible to identify crucial relationships between polymer structure, optoelectronic properties, microstructure, and OFET performance.[8] Nowadays, the interdisciplinary scientific success is represented by high-performance SCPs with charge carrier mobilities exceeding the value of amorphous silicon.[3, 9] However, further research is essential to enable developing the next generation of electronic devices for application in healthcare, safety technology, transportation, and communication. II) Objective and Results Within the scope of this doctoral thesis, current high-performance p-conjugated SCPs should be studied comprehensively to improve the present understanding about the interdependency between molecular structure, material properties and charge transport. Therefore, the extensive research approaches focused on different key aspects of high charge carrier mobility polymers for organic transistors. The performed investigations comprised the impact of, first, novel design concepts, second, precise structural modifications and, third, synthetic and processing conditions and led to the major findings listed below. 1. The design concept of tuning the p-conjugation length allows to gradually modulate physical material properties and demonstrates that a strong localization of frontier molecular orbitals in combination with a high degree of thin-film ordering can provide a favorable platform for charge transport in p-conjugated semiconducting polymers.[1] 2. The replacement of thiophene units with thiazoles in naphthalene diimide-based p- conjugated polymers allows to increase interchain interactions and to lower frontier molecular orbitals. This compensates the potentially detrimental enhancement of backbone torsion and drives the charge transport to unipolar electron transport, whereas mobility values are partially comparable with those of the respective thiophene containing analogs. 3. p-Conjugated diketopyrrolo[3,4-c]pyrrole-based copolymers can be synthesized within fifteen minutes what, in combination with avoiding aqueous washings and optimizing processing conditions, allowed an increase in morphological and energetic order and, thus, improved the charge transport properties significantly. III) Conclusion The key findings of this doctoral thesis provide new significant insights into important aspects of designing, synthesizing and processing high charge carrier mobility polymers. By this, they can guide future research to further improve the performance of organic electronic devices - decisive for driving the development and fabrication of smart, functional and wearable next-generation electronics. References [1] T. Erdmann, S. Fabiano, B. Milián-Medina, D. Hanifi, Z. Chen, M. Berggren, J. Gierschner, A. Salleo, A. Kiriy, B. Voit, A. Facchetti, Advanced Materials 2016, 28 (41), 9169–9174, DOI:10.1002/adma.201602923. [2] Y. Karpov, T. Erdmann, I. Raguzin, M. Al-Hussein, M. Binner, U. Lappan, M. Stamm, K. L. Gerasimov, T. Beryozkina, V. Bakulev, D. V. Anokhin, D. A. Ivanov, F. Günther, S. Gemming, G. Seifert, B. Voit, R. Di Pietro, A. Kiriy, Advanced Materials 2016, 28 (28), 6003–6010, DOI:10.1002/adma.201506295. [3] A. Facchetti, Chemistry of Materials 2011, 23 (3), 733–758, DOI:10.1021/cm102419z. [4] A. J. Heeger, Chemical Society Reviews 2010, 39, 2354–2371, DOI:10.1039/B914956M. [5] H. Klauk, Chemical Society Reviews 2010, 39, 2643–2666, DOI:10.1039/B909902F. [6] S. G. Bucella, A. Luzio, E. Gann, L. Thomsen, C. R. McNeill, G. Pace, A. Perinot, Z. Chen, A. Facchetti, M. Caironi, Nature Communications 2015, 6, 8394, DOI:10.1038/ncomms9394. [7] H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W. Wu, E. P. Woo, Science 2000, 290 (5499), 2123–2126, DOI:10.1126/science.290.5499.2123. [8] D. Venkateshvaran, M. Nikolka, A. Sadhanala, V. Lemaur, M. Zelazny, M. Kepa, M. Hurhangee, A. J. Kronemeijer, V. Pecunia, I. Nasrallah, I. Romanov, K. Broch, I. McCulloch, D. Emin, Y. Olivier, J. Cornil, D. Beljonne, H. Sirringhaus, Nature 2014, 515 (7527), 384–388, DOI:10.1038/nature13854. [9] S. Holliday, J. E. Donaghey, I. McCulloch, Chemistry of Materials 2014, 26 (1), 647–663, DOI: 10.1021/cm402421p.

The aim of this diploma thesis is to conduct optical and photovoltaic characterization of derivatives of diketopyrrolopyrrole (DPP) as materials suitable for fabrication of bulk heterojunction organic solar cells. The charge transfer from donor material (DPP) to acceptor material (PCBM) is studied by a quenching of fluorescence. The photovoltaic response is studied by current – voltage characteristic which can tell us crucial parameters such as shor circuit current density Jsc, open circuit voltage Voc, fill factor FF and power conversion efficiency PCE. Optical characterization was carried out for symmetrical DPP derivatives (U69 and U97) which both contained diphenylaminstilbene moiety and differed in N-alkyl group. On the other hand photovoltaic characterization was conducted for analogous but asymmetrical materials (U70 and U99). Material U29 was characterized as well but its properties proved to be very poor. Both these characterizations tell us that materials with shorter solubilization groups (U69 and U99) are more suitable candidates. Achieved PCE for U70 was 0,74 % and for U99 up to 1,39 %. From these values one can say that small molecule organic materials can be used for fabrication of solar cells.

The development of new electronic devices requires the design of novel materials since the existing technologies are not suitable for all applications. In recent years, semiconducting polymers (SCPs) have evolved as fundamental components for the next generation of costumer electronics. They provide interesting features, especially flexibility, light weight, optical transparency and low-cost processability from solution. The research presented in this thesis was devoted to theoretical studies of donor-acceptor (DA) copolymers formed by electron-deficient 3,6-(dithiophene-2-yl)-diketopyrrolo[3,4-c]pyrrole (TDPP) and different electron-rich thiophene compounds. This novel type of SCPs has received a lot of attention due to experimental reports on very good electronic properties which yielded record values for organic field-effect transistor applications. In order to get a deeper understanding of the structural and electronic properties, the main objective of this work was to study this material type on the atomic scale by means of electronic structure methods. For this, density functional theory (DFT) methods were used as they are efficient tools to consider the complex molecular structure. This work comprises three main parts: a comparative study of the structural and the electronic properties of TDPP based DA polymers obtained by means of different theory levels, the calculation of the intermolecular charge transfer between pi-pi stacked DA polymer chains based on the Marcus transfer theory and investigations of molecular p-doping of TDPP based DA polymers. For the first, DFT using different functionals was compared to the density functional based tight binding (DFTB) method, which is computationally very efficient. Although differences in structural properties were observed, the DFTB method was found to be the best choice to study DA polymers in the crystalline phase. For the second, correlations between the molecular structure and the reorganization energy are found. Moreover, the dependency of the electronic coupling element on the spatial shape of the frontier orbitals is shown. Furthermore, a Boltzmann-type statistical approach is introduced in order to enable a qualitative comparison of different isomers and chemical structures. For the last part, the p-doping properties of small, multi-polar dopant molecules with local dipole provided by cyano groups were investigated theoretically and compared with experimental observations. The one with the strongest p-doping properties was studied in this work for the first time on a theoretical basis. Comparing these different p-dopants, rich evidence was found supporting the experimentally observed doping strength.