With increasing demands for transit capacity of data networks as well as communication network optical networks seem to be the suitable solution. Light beam is attractive to use for data transmission . Transmitted data can be expressed by means of light impuls.. For execution of the project we need the whole optical telecommunical system which consists of transmitter, transmission link and receiver. The target of transmission link is to transfer optical beam from its resourse to detector with minimal losses. The optical fibre or optical freespace optical link FSO are used for this purpose. This thesis discusses basic effects that accompany these roads. The program that is created in this study clearly shows and describes the dependence of these phenomena on the individual input parameters. It is designed for students so that they can better imagine how these phenomena take place.

Chief topic of a Master’s Thesis is comparing of conventional sources of light with LED diodes, their characteristics. This work deals with utilizing LED diodes in automotive lighting, in railway applications and universal information about principle of lighting. Else this work describes feasibility study of headlight of railway locomotive. Emphasis is laying for clearness of this work.

This master thesis deals with design and construction of device for optic biosensor. The device are using for detected halogen compound in the water. For excitation testing sample is used LED diode about wave length 590 nm. Photocounter is used for detection of the emitted light after fluorescence Such as fluorescent marker are 5(6)-carboxynaphthofluorescein. The thesis is divided into three head parts. The first part includes the theory needed for realization; the second part takes in detail description of the construction and function of the device and the last part describes measurements with the device.

This diploma thesis deals with optical properties of silicon. The main task of the work was to create silicon samples with ohmic contacts. Suitable radiation source was designed to measure absorption edge of monocrystalline silicon. Designed measuring station was realised. Measurements were performed on samples of p-type monocrystalline silicon provided by ON Semiconductor Rožnov. p. Radhoštěm. The absorbtion edge was measured.

This master’s thesis deals with parameters and properties of electromagnetic wave, its spread in environment and then in optical fiber, as well with optical fibers. Principle of laser sources and a issues of coupling a optical performance into optical fiber are described here. Next a function of laser diodes, power and cooling requirements are described. A block diagram of fiber optic source of laser radiation is designed as well as a circuit solution of every single block with respecting of parameters and sensitivity of used laser diode. The protection of laser diode and high-frequency modulation of optical power are solved. Subsequently the construction of every single block was done and the right function of constructional solution was tested.

The main subject of this master thesis is to evaluate using of Design of Experiment in industrial company in the development of LED modules for cars. In background study Design of Experiment methodology is described. Next part of background study describes the general principles of termography measurements, next chapter includes the information’s about LED technology and temperature degradation. At the beginning of the practical part is a description of the team analysis due to selection of factors, next chapter validates importance of vias. In next chapter methodology of print circuit board preparations and measuring are described. A next chapter describes the implementation of design of experiment at voltages 8 V, 13,5 V, 16,5 V. Designs of Experiments were made for four or five factors. The reason for this decision was the manual adjustment of printed circuit boards. At the end of each Design of Experiment is the recommendation of factors and interactions settings with regard on response, which is the minimal temperature. At the end of master’s thesis is the final evaluation.

This thesis deals with valveless reciprocating pumps. Within the thesis several designs of pump geometry are demonstrated. Their parameters were obtained using computational fluid dynamics. Reciprocating piston movement was simulated by time dependent inlet boundary condition or by dynamic mesh. The individual variants were compared mainly from point of view of volumetric efficiency, which was the main evaluated parameter. Results of calculations are presented as dependencies of volumetric efficiency on frequency and amplitude of piston motion and on value of backpressure. Two variants of the prototype pump geometry were manufactured to experimentally validate parameters obtained from calculations. Volumetric efficiency together with hydraulic efficiency were evaluated from measured data.

Tato diplomová práce se zabývá problematikou plašení ptáků a jejich humánního plašení pomocí laserů. Práce také pojednává o bezpečnosti laserů, problému řídicího obvodu laserových diod, kolimaci svazku a jeho rozšíření tak, aby výstupní výkon paprsku nepřekročil maximální hodnotu výstupního výkonu laseru třídy 2M.

This diploma thesis deals with optical and optoelecronic components. The first part of the work describes the optical paths and methods of their measurement. The second part describes the coupler, circulator and isolator. Further described is a laser diode, a photodetector and a modulator. The third part describes the measurement procedure of the coupler, circulator, isolator, laser diode, photodetector and modulator. The measured values are compared with the catalog values.

The main task of the Master Thesis is to project a device to measure surface temperature distribution by matrix of diodes. The maeasuring device is designed for usage at places where other thermal map scanning measuring methods (e.g. thermocamera) can not be used. The key objective was to design an appropriate measuring method for selected type of sensor. This method should ensure the most effective detection of the changing value, translate received values to the digital form and send it to the computer. All circuits were powered over USB (Universal Serial Bus) together with the signalling. Calibration was needed due to different sensors technical parameters. The calibration was realized on the software level and displayed with the thermal map scanning on the computer. The final project has the form of the measuring installation with 256 sensors on 8x8 cm area.