The subject of the thesis is the design of the detached multifunctional house in the district Královo Pole, Brno. The thesis form matches the project documentation for construction execution. The new building consists of five floors, basement and flat vegetation roof based on white tank. The aboveground floors include two stores, cafe, 14 flat units and 12 office units. Every floor has a stroller storage and the utility room which are available for all residents. The basement serves as a collective parking and there is located also the technical room. The storage cubicles for flat units are designed in the corresponding floors close to the staircase. The parking is also placed on the paved space in front of the building fitting 12 parking places including the one for the disabled. The construction system is bidirectional, formed by masonry brick elements, except for the peripheral basement masonry, which is monolithic waterproof concrete-iron structure (white tank). The ceiling construction is designed as a monolithic concrete-iron cross reinforced plate. The whole object is isolated by certified contact thermal insulation system of mineral wool thick 200 mm.

The aim of the diploma thesis is to elaborate the project documentation of kinderschule in the city Bucovice. The house is as a detached house in a newly-built area. The object is double-storeyed and without basement. It has rectangular size and is covered with a flat one coat roof. On the first floor there is one nursery department for eighteen children and technical facilities, on the second floor there is also one nursery department for eighteen children, a multipurpose hall and the head office. The house is build from brick with a contact thermal insulation system. Part of the project documentation is also a basic assessment of the building in terms of building physics.

This diploma thesis deals with designing of a leisure sport centre in Partizánske in Slovak Republic. It is a detached object on a flat terrain. The object of the leisure sport center has two floors, or specifically the sport center stretches through two floors. In the building there is a cafe with bowling, three badminton courts, five squash courts and commercial area intended for massages. The object is designed from constructive system from lightweight concrete block. The second part is constructed from precast concrete frame with infill wall from lightweight concrete block. The ceiling in one part of the object is designed to be assembled of prestressed precast floor slab and in second part of trapezoidal sheet. The roof is made like flat green roof with extensive grassing. The work includes project documentation for the construction.

DIPLOMA THESIS IS IS FOCUSED A PROJECT OF A NEW HOME FOR THE ELDERLY IN THE MUNICIPALITY BŘEZINA U KŘTĚTELY AT THE SURFACE NUMBER 312 / 1,310,311,309,308 / 3,308 / 2,308 / 1. CONTAINS A COMPLETE DOCUMENTATION FOR THE CONSTRUCTION. THE BUILDING IS SITUATED IN THE TERRITORY OF SOUTH MORAVIAN REGION. THE LAND IS SLIMLY SLOW AND ITS TOTAL AREA 2274 M2. THE BUILDING HAS THREE FLOOR FLOORS. THE OBJECT IS BASED ON THE FOUNDATION STRIPS AND ARE ROOFED WITH A VEGETABLE FLOOR ROOF. VERTICAL CONSTRUCTIONS ARE DESIGNED FROM A WALL CONSTRUCTION SYSTEM USING CERAMIC BRICK BLOCKES. CURRENT CONSTRUCTIONS ARE COMPLETED WITH CONTACT INSULATING SYSTEM IN ACCORDANCE WITH ETICS PRINCIPLES. CEILINGS ARE MONOLITHIC REINFORCED CONCRETE SLABS. 19 APARTMENT UNITS ARE DESIGNED IN THE BUILDING. THE CAPACITY OF THE APARTMENT UNIT IS MOSTLY SINGLE IN MOST CASES. A PRACTICAL PHYSICIAN ORDINATION AND A SERVICE AREA IS DESIGNED IN THE PART OF THE OBJECT. THIS PART IS AVAILABLE TO THE WIDE PUBLIC. DRAWING PART WAS PROCESSED IN AUTOCAD.

The diploma thesis deals with the design of the boarding house located in Lipnice nad Sázavou district of Havlíčkův Brod. The thesis contains complete design documentation for building construction, including assessment in terms of building physics and buildings fire protection. The construction has a U-shaped platform, with two-storey buildings facing each other, connected by a single-storey middle part, where house background is located. We will find here restaurant, kitchen, playroom, wellness, two barrier free rooms, thirteen regular double rooms and eight two-room apartments Construction is brick of sand-lime blocks, insulated by contact thermal insulation system. The ceilings are made of prestressed concrete floor slab. The roof above the two-storey buildings is saddle roof, where the load-bearing structure is formed by a truss. On the single-storey part there is a flat roof, where the supporting structure consists of prestressed concrete floor slab.

Diploma thesis is in form of building documentation for construction according to valid regulations. Designed mixed-use building is located in Zlín on plots no. 2865/3, 2865/22, 2865/23 and 2866. Building has shape of letter L, it has three above-ground floors and undergroud garage. Building has three separate parts – part with flats of sizes 3+kk and 4+kk, training centre and community centre. Each part has different number of above-ground floors. New building is detached house with maximum height 10,48 m. Object is constructed with ceramics blocks. It has ventilated facade and flat green roof. Ceiling is designed as cast-in-place reinforced slab. Material for foundations is waterproof concrete. Diploma thesis also includes assessment of thermal technology, acoustic and fire safety.

The subject of the diploma thesis is the elaboration of project documentation for construction of the Orlík Resort. The buildings are detached and are set in a slightly sloping terrain in the cadastral area Kožlí u Orlíka. The main building has two above-ground floors and one underground floor. In the basement, there is a utility room for the whole building and warehouse. Furthermore, the hall is divided into a section for men and a section for women. In these sections, visitors have a dressing room with cabins with showers and toilets. Then there will be a choice of two exercise halls, two massage rooms or a large gym area. On the ground floor, the building is entered via lee to the vestibule and into the spacious hall. In the entrance, there is a reception with storage area and a room with a kitchenette and toilet. The building is also accessible via a second staircase and large glass sliding windows. There is a conference room with adjustable size, a social hall, warehouses, toilets for women and men as well as an office. For employees there is a day room with kitchenette, changing rooms and showers separate for men and women. The upper floor contains two terraces. These are green roofs, where one is partially fitted with tiles, and there is a recognized reinforced concrete skeleton. There is a cleaning room on each floor. There are also processed two apartment houses, illuminated by roof skylights, which are on the plot four times. All buildings are designed from the reinforced concrete skeleton with lined sandstone blocks. The ceilings are made of prestressed hollow panels, and the roofs are green. Apartment house No. 1 is symmetrical and contains two apartments. There is a storage room, lee, vestibule, utility room, toilet, room, bedroom and a large kitchen with living room and terrace access. The large bathroom has a bathtub, glass shower and one sliding door that closes the room with urinal or toilet. Apartment house No. 2 is divided into three apartment

The subject of this diploma thesis is the design of a multifunctional building, which consists of parking lots, store section, office as well as dwelling units. Multifunctional building has four above-ground floors, full basement and a flat roof. During processing, emphasis was placed on layout solutions to be designed according to legislation and standards. In the basement there are parking lots, the ground flood is used as a store section, the first floor consists of office units designed for start-up companies. The third and fourth floor consists dwelling units from one-bedroom to three-bedroom apartments. The building has a concrete frame structure combined with a masonry system from Porotherm ceramic pieces. Horizontal load bearing system is designed of two way reinforced concrete slabs. Walls bellow the ground level are made from core-filled reinforced concrete blocks. The building is supported by the spread footing concrete system. Multifunctional building is situated in flat terrain in the city of Brumov-Bylnice.

The subject of the Diploma thesis was to design and prepare a documentation for the construction of a spa hotel. The building is situated in the village of Lipno nad Vltavou. This area is famous for a ski resort and the Lipno Dam which can be seen from the hotel. The hotel consists of three operating parts - spa, restaurant, accommodation and recreation area. The whole complex is designed as two rectangular plans. The spa part is a one-storey building with a flat green roof. The hotel with restaurant is a three-storey building with a pitched roof and metal roofing. The main entrance is oriented to the north. In front of the building there is a parking space for hotel guests. The spa structural system is a mix of a reinforced concrete frame with beam and a wall system made of clay blocks Porotherm. The hotel and restaurant is a wall structural system made of clay blocks Porotherm. The floor structure is designed as reinforced concrete slabs. The whole building is insulated to meet all the requirements of energy consumption of buildings.

The Subject of these thesis is project new sport hall for Fire sport. The building is divided to two parts connected together. First part SO01 is main sport hall, second SO02 is background for sportsmen. The Building SO01 is making from LLENTAB system. The main support elements are from steel thin-walled profile, This part is single-storey building, without basement, build on foundation pad. Building SO02 is making from hollow bricks Heluz, floor structure is from prestressed concrete panels. The building has two floor with flat roof, build on concrete strip foundation. External wall is contact thermal insulated by mineral wool. All building is design according valid building standards.