This thesis consists of two parts addressing two different problems in fading channels. The first part deals with asynchronous cooperative relay communication. The assumption of nodes in a cooperative communication relay network operating in synchronous fashion is often unrealistic. In this work we consider two different models of asynchronous operation in cooperative-diversity networks experiencing slow fading and examine the corresponding Diversity-Multiplexing Tradeoffs (DMT). For both models, we propose protocols and distributed space-time codes that asymptotically achieve the transmit diversity bound on DMT for all multiplexing gains and for number of relays N ≥ 2. The distributed space-time codes for all the protocols considered are based on Cyclic Division Algebras (CDA). The second part of the work addresses the DMT analysis of diversity embedded codes for MIMO channels. Diversity embedded codes are high rate codes that are designed so that they have a high diversity code embedded within them. This allows a form of opportunistic communication depending on the channel conditions. The high diversity code ensures that at least a part of the information is received reliably, whereas the embedded high rate code allows additional information to be transferred if the channel is good. This can be thought of coding the data into two streams: high priority and low priority streams so that the high priority stream gets a better reliability than the lower priority stream. We show that superposition based diversity embedded codes in conjunction with naive single stream decoding is sub-optimal in terms of the DM tradeoff. We then construct explicit diversity embedded codes by the superposition of approximately universal space-time codes from CDAs. The relationship between broadcast channels and the diversity embedded setting is then utilized to provide some achievable Diversity Gain Region (DGR) for MIMO broadcast Channels.

The atmospheric lightwave propagation is considerably influenced by the random variations in the refractive index of air pockets due to turbulence. This undesired effect significantly degrades the performance of free-space optical (FSO) communication systems. Interestingly, the severity of such random degradations is highly related to the range of atmospheric propagation. In this thesis, we introduce relay-assisted FSO communications as a very promising technique to combat the degradation effects of atmospheric turbulence. Considering different configurations of the relays, we quantify the outage behavior of the relay-assisted system and identify the optimum relaying scheme. We further optimize the performance of the relay-assisted FSO system subject to some power constraints and provide optimal power control strategies for different scenarios under consideration. Moreover, an application of FSO relaying technique in quantum communications is investigated. The results demonstrate impressive performance improvements for the proposed relay-assisted FSO systems with respect to the conventional direct transmission whether applied in a classical or a quantum communication channel.

Στην παρούσα διπλωματική εργασία μελετάμε τα πλεονεκτήματα που επιφέρει η χρήση πολλαπλών κεραιών στον πομπό και στον δέκτη, κατά την μετάδοση, με στόχο την βελτίωση των παρεχομένων υπηρεσιών στο χρήστη. Στο Κεφάλαιο 1, γίνεται μια ιστορική αναδρομή των ασύρματων επικοινωνιών καθώς των σύγχρονων ασύρματων τεχνολογιών και κεραιών που χρησιμοποιούνται. Στη συνέχεια γίνεται μια αναφορά στις έννοιες του διαφορισμού, του κέρδους διάταξης και της χωρικής πολυπλεξίας οι οποίες συνδέονται άρρηκτα με τα συστήματα MIMO. Στο Κεφάλαιο 2, αναφερόμαστε σε όλα εκείνα τα χαρακτηριστικά που περιγράφουν το ασύρματο κανάλι και εξάγουμε την γραμμική σχέση εισόδου-εξόδου του ασύρματου καναλιού. Στην συνέχεια γίνεται μια ανάλυση των στοχαστικών μοντέλων περιγραφής του ασύρματου διαύλου διαλείψεων και πιο συγκεκριμένα των μοντέλων Rayleigh και Rice. Στο Κεφάλαιο 3 εξετάζουμε την αξιοπιστία διαφόρων τύπων κεραιοσυστημάτων, ως προς τον ρυθμό των ρυθμό των λανθασμένων συμβόλων στον δέκτη. Πιο συγκεκριμένα εξετάζεται η τεχνική Maximal Ratio Combining για τα συστήματα SIMO καθώς και του σχήματος Alamouti για τα συστήματα ΜISO. Συνεχίζοντας στα MIMO συστήματα αναλύουμε τις μεθόδους ισοστάθμισης για την ανάκτηση των δεδομένων, και πιο συγκεκριμένα τις τεχνικές Zero Forcing, Minimum Mean Square Error,V-Blast και καθώς και την βέλτιστη τεχνική Maximum Likelihood. Στο τελευταίο μέρος της εργασίας αναλύουμε τα πλεονεκτήματα των MIMO συστημάτων, ως προς την χωρητικότητα που προσφέρουν, σε στοχαστικά κανάλια διαλείψεων.Στη συνέχεια, γίνεται αναφορά στην μέθοδο SVD και στην αναπαράσταση του MIMO καναλιού από έναν αριθμό ανεξάρτητων SISO διαύλων. Κλείνοντας αναφέρουμε την μέθοδο βέλτιστης κατανομής ισχύος στις κεραίες του πομπού Water-filling, και στην περαιτέρω αύξηση της χωρητικότητας του διαύλου που προσφέρει. / In this diploma thesis we are investigating the benefits of using Multiple Input and Multiple Output antennas in information transmission, with final goal to improve Quality of Service. The first Chapter, includes a historical background of the wireless communications but also is a reference to the modern wireless and antenna technologies. Moreover, we introduce the definition of new concepts, such as diversity and array gain and also spatial multiplexing, which are closely connected with MIMO technology. In the second chapter, we introduce the characteristics which they are describe the wireless channel, while simultaneously we mention the linear input-output relationship of the wireless channel. Additionally, we analyze the stochastic wireless channel models, namely the Rayleigh and the Rician fading models. In the third chapter, we investigate the reliability of different types of antenna topologies, regarding the pace of the invalid symbols in the transmitter. More specifically, we examine the Maximal Ratio Combining and Alamouti technique, for SIMO and MISO systems respectively. The next step is to analyze the equalization methods, which are used in MIMO antennas, and more specifically are, Zero Forcing, Minimum Mean Square Error and V-Blast receivers, but also the optimal Maximum Likelihood equalizer. In the last part of this Thesis, we investigate the benefits of MIMO systems regarding the Capacity, in random channels. Also, a reference to the SVD method has been made,which we use to analyze the MIMO channel, in a number of parallel SISO channels. Lastly, we use the water-filling method to allocate, with the optimal way, the given power in the transmit antennas, a fact that leads to even greater Capacity gain.

Single Carrier Frequency Division Multiple Access (SC-FDMA) is a multiple access transmission scheme that has been adopted in the 4th generation 3GPP Long Term Evolution (LTE) of cellular systems. In fact, its relatively low peak-to-average power ratio (PAPR) makes it ideal for the uplink transmission where the transmit power efficiency is of paramount importance. Multiple access among users is made possible by assigning different users to different sets of non-overlapping subcarriers. With the current LTE specifications, if an SC-FDMA system is operating at its full capacity and a new user requests channel access, the system redistributes the subcarriers in such a way that it can accommodate all of the users. Having less subcarriers for transmission, every user has to increase its modulation order (for example from QPSK to 16QAM) in order to keep the same transmission rate. However, increasing the modulation order is not always possible in practice and may introduce considerable complexity to the system. The technique presented in this thesis report describes a new way of adding more users to an SC-FDMA system by assigning the same sets of subcarriers to different users. The main advantage of this technique is that it allows the system to accommodate more users than conventional SC-FDMA and this corresponds to increasing the spectral efficiency without requiring a higher modulation order or using more bandwidth. During this work, special attentions wee paid to the cases where two and three source signals are being transmitted on the same set of subcarriers, which leads respectively to doubling and tripling the spectral efficiency. Simulation results show that by using the proposed technique, it is possible to add more users to any SC-FDMA system without increasing the bandwidth or the modulation order while keeping the same performance in terms of bit error rate (BER) as the conventional SC-FDMA. This is realized by slightly increasing the energy per bit to noise power spectral density ratio (Eb/N0) at the transmitters.

Single Carrier Frequency Division Multiple Access (SC-FDMA) is a multiple access transmission scheme that has been adopted in the 4th generation 3GPP Long Term Evolution (LTE) of cellular systems. In fact, its relatively low peak-to-average power ratio (PAPR) makes it ideal for the uplink transmission where the transmit power efficiency is of paramount importance. Multiple access among users is made possible by assigning different users to different sets of non-overlapping subcarriers. With the current LTE specifications, if an SC-FDMA system is operating at its full capacity and a new user requests channel access, the system redistributes the subcarriers in such a way that it can accommodate all of the users. Having less subcarriers for transmission, every user has to increase its modulation order (for example from QPSK to 16QAM) in order to keep the same transmission rate. However, increasing the modulation order is not always possible in practice and may introduce considerable complexity to the system. The technique presented in this thesis report describes a new way of adding more users to an SC-FDMA system by assigning the same sets of subcarriers to different users. The main advantage of this technique is that it allows the system to accommodate more users than conventional SC-FDMA and this corresponds to increasing the spectral efficiency without requiring a higher modulation order or using more bandwidth. During this work, special attentions wee paid to the cases where two and three source signals are being transmitted on the same set of subcarriers, which leads respectively to doubling and tripling the spectral efficiency. Simulation results show that by using the proposed technique, it is possible to add more users to any SC-FDMA system without increasing the bandwidth or the modulation order while keeping the same performance in terms of bit error rate (BER) as the conventional SC-FDMA. This is realized by slightly increasing the energy per bit to noise power spectral density ratio (Eb/N0) at the transmitters.