This thesis concerns with the development of a dual-parameter sensor based on fiber Bragg grating (FBG) and a packaging design for high pressure sensing in harsh environment. This thesis starts by introducing a novel design of a partially coated FBG, using a metallic insert and a thermal curing epoxy. An analytical opto-mechanical model, based on couple mode theory, was developed and presented. The experimental and modelling result of the optical response of the partially coated FBG were compared and shown to be in excellent agreement. The experiments were executed on a custom-built fiber optic calibration station. The coated FBG sensor has a temperature sensitivity of 26.9 ± 0.3 pm/°C, which is 2.7 times higher than a bare fiber; and a force sensitivity of 0.104 nm/N, which is 13 times smaller than a bare fiber. The zero reference of the sensor has a drift of a maximum of 70 pm but the sensor is shown to settle within ±5 pm after 3 thermal cycles and 10 tensile loading cycles. A low profile packaging design is presented for a maximum pressure of 20.68 MPa (3000 psi) for harsh environment applications. A detailed study with FEM analysis revealed the optimal design for the package’s sleeve thickness is 0.5 mm. The temperature sensitivity is in close agreement with the unpackaged coated sensor with 10% difference. Compared to the modelling, the equivalent force sensitivity is 27% lower due to prototype dimensional uncertainties and modelling uncertainties with the material properties. The lack of pre-tension of the FBG sensor in the package also attributed to lower force sensitivity at pressure level lower than 4.13 MPa (600 psi).