Diplomová práce pojednává o stabilizaci diskrétního logistického modelu pomocí několika řídících metod. Je zde provedena především stabilizace rovnováh, 2-periodických cyklů a 3-periodických cyklů. Ke stabilizaci systému je využito proporčního zpětně-vazebního řízení, zpětně-vazebního řízení s časovým zpožděním a řízení založeného na predikci. U každé metody je diskutovaná stabilizační množina pro řídící zesilovač spolu s oblastmi stability pro odpovídající kontrolovaná řešení. Všechny teoretické výsledky jsou ilustrovány grafickými interpretacemi v softwaru MATLAB. Podpůrné výpočty jsou provedeny pomocí softwaru Maple.

The thesis deals with a description and a static and dynamic analysis for an existing construction of lookout tower. The steel watchtower is located in Město Albrechtice and is made up of two lattice towers connected by a bridge. Main point was to create calculation models for the purpose of dynamic and static analysis, in the software SCIA Engineer 19.1, which is based on the principle of finite element method. Attention was paid to load created by winds according to Eurocode 1 and Eurocode 3, glaze and rime ice load and dynamic coefficient calculation. The thesis also includes an assesment of selected parts of the construction according to Eurocodes.

This diploma thesis is focused on methodology for sorting of solid fired bricks for reconstruction of historical buildings. The theorethical part of this thesis includes description of production technology of solid fired bricks and diagnostic methods. In practical part there are these methods aplied on the solid fired bricks, which are intended for reconstruction of the bridge in Sedlec. There are monitored changes in structure of solid fired bricks caused by repeated freezing and defrosting. This changes are monitored by resonant frequency method and ultasonic pulse method.

Předložená magisterská práce se zabývá možným použitím vitrifikovaného lignitového lóžového popele jako náhrada slinku v kompozitních cementech. Byly zkoumány vlivy přidaného vitrifikovaného lóžového popele, jeho jemnosti, alkalických roztoků a jejich koncentrací. Byly připraveny kompozitní cementy v souladu s normou DIN EN 197 – 1. V těchto cementech bylo nahrazeno 30 % slinku vitrifikovaným lóžovým popelem. Konkrétně byly připraveny kompozitní cementy s vitrifikovaným lóžovým popelem o jemnosti 5549 cm2/g a 8397 cm2/g. Dále byly přidány alkalické roztoky hydroxidů a síranů vždy o dvou různých koncentracích, za účelem stimulace pucolánové a/nebo geopolymerní reakce. Mechanické vlastnosti připravených vzorků byly charakterizovány mechanickým testováním na prizmách s rozměry 40×40×160 mm, jak je specifikováno v normě DIN EN 196 – 1. Byla provedena nedestruktivní měření dynamického elastického modulu a destruktivní testovaní na pevnosti v tlaku a v ohybu. Distribuce velikosti částic a chemická analýza vstupních materiálů byla vykonána pomocí laserové granulometrie a rentgenové fluorescence. U zatvrdlých kompozitů bylo dále zkoumáno po 2 a 28 dnech hydratace fázové složení s využitím metody rentgenové difrakce a mikrostruktura s využitím skenovací elektronové mikroskopie. Výsledky ukázaly, že mechanické vlastnosti jsou nezávislé na množství přidaných alkálií stejně jako na jemnosti přidaného vitrifikovaného lóžového popele. Nicméně, znatelně nižší mechanické pevnosti byly pozorovány pro vzorky, které byly aktivovány hydroxidy, pravděpodobně kvůli brzké tvorbě silikátového hydrogelu. Vzorky aktivované sírany nedosáhly pevností jako referenční malta.

The aim of this work was double-balanced mixer implementation, which will be used like laboratory equipment. This thesis deals with design of the double-balanced mixer from first theoretical principles to a practical design of a laboratory equipment. For the practical design the integrated mixer SA612 was used. Input signal to the mixer up to 500 MHz frequency can be used. For required operation external oscillator and fifth-order low pass filter were constructed. Oscillator was designed for fixed frequency 32 MHz. Fifth-order low pass filter was inserted between the mixer and the oscillator, because of filtering higher harmonics. The second aim of the work was measuring double-balanced mixer basic parameters, such as Compression Point (P-1dB) and Intercept Point (IP3). For the IP3 measurement, another one device was required. It consists of the power combiner for mixing two frequency close signals and third-order bandpass filter, which selects required frequency band. Finally, the laboratory equipment was fabricated and its real parameters were measured.

This work deals with frequency generators based on the direct digital synthesis method DDS. Basic principles and attributes of the frequency generator DDS are explained. The text describes parameters influencing and defining a quality of the generated signal. The list of available integrated circuits realizing the direct digital synthesis is mentioned. A construction of the DDS generator with a device AD9954 and the generator control are described. At the end of the work, the function and parameters of the designed generator are verified.

The master´s thesis is focused on design of ADSR filter and voltage controlled amplifier (VCA). Three additional circuits performing analog signal processing are added. Functionality of designed circuits is verified in simulation program. All designed circuits are practically realized. Thesis includes complete design of the mentioned circuits and all necessary informations for its practical realization. All designed circuits are measured and the results are presented.

This thesis deals with basic methods of root mean square and peak value measurement of a digital acoustic signal, algotithms to measure audio programme loudness and true-peak audio level according to recommendation ITU-R BS.1770-1 and digital systems for control of signal dynamic range. It shows achieved results of root mean square and peak value measurement and results of implementation of dynamic processor with general piecewise linear non-decreasing static curve and algorithms according to recommendation ITU-R BS.1770-1.

This thesis deals with a theoretical analysis of the basic parameters of receivers, input circuit architecture and signal digitization. According to the specified assignment it is outlined block scheme of front end for software receiver with specified components and the total bilance is calculated. Individual parts of the system are designed and realized. This is a set of four input filters for bandwidths: short waves up to 30 MHz, 87,5-108 MHz, 144-148 MHz and 174-230 MHz. The main point of design is a circuit containing a low-noise amplifiers, switches, and two amplifiers with adjustable amplification. Mainly are used integrated circuits from Analog Devices corporation. To control the various switches and adjustable amplifiers was designed a separate panel, which is connected to the main circuit via a cable. In the last phase was the whole system and its components subjected to measurements. Thanks to a number of mounted SMA connectors it is possible to measure different parts of the system and we are able to modify it partially.

In my master’s thesis I describe basics of magnetic resonance measurement. I focus on methods of DCE-MRI with T1 weighting image. I mention some basic contrast agents which are used in MRI imaging. I describe some of pulse sequences which are used in experimental part of my thesis. There I measure contrast in the sample. The measurement is performed in accordance with an acquisition protocol I have proposed. The experiment part was realized on 1.5 T magnet at Masaryk Oncological Institute in Brno. I improved software which is use to research of MR IR TurboFLASH’s data and made software which is use to evaluation perfuse analysis ours measured sequences. At the end I made a discussion about gained facts.