No description available.

The thesis deals with a research programme in which the cutting performance of a new generation of ceramic cutting tool material is evaluated using the turning process. In part one, the performance of commercial Kyon 2000 sialon ceramic inserts is studied when machining a hardened alloy steel under a wide range of cutting conditions. The aim is to formulate a pattern of machining behaviour in which tool wear is related to a theoretical interpretation of the temperatures and stresses generated by the chip-tool interaction. The work involves a correlation of wear measurement and metallographic examination of the wear area with the measurable cutting data. Four main tool failure modes are recognised: (a) flank and crater wear (b) grooving wear (c) deformation wear and (d) brittle failure Results indicate catastrophic edge breakdown under certain conditions. Accordingly in part two, the edge geometry is modified to give a double rake tool; a negative/positive combination. The results are reported for a range of workpiece materials under orthogonal cutting conditions. Significant improvements in the cutting performance are achieved. The improvements are explained by a study of process parameters; cutting forces, chip thickness ratio, chip contact length, temperature distribution, stress distribution and chip formation. In part three, improvements in tool performance are shown to arise when the edge chamfer on a single rake tool is modified. Under optimum edge chamfer conditions a substantial increase in tool life is obtained compared with the commercial cutting geometry.

Adhesive bonding of aluminium is widely used in the aerospace industry. High initial bood strengths can be obtained, but bond failure occurs atter prolonged exposure to humid enviroments. The thesis contains details ot a test procedure which has been designed and developed for the assessment of different alloys, pretreatments, and adhesives, which will give adhesively bonded aluminium joints of high strength coupled with long term durability. The test involves assembly of lap shear specimens in a precision jig using 250 ballotini spacers in the adhesive to control the bond line thickness. The test is modified by drilling three accurately located holes through the bonded area after assembly of the joint and curing of the adhesive. Further important features at the test, such as fillet control, are detailed. The test was assessed, modified and developed to give a reliable and reproducible method which would discriminate amongst different bonding systems after exposure to humid test environments. This is the first test to have achieved the discrimination necessary for short term assessment of bond systems where long term durability is required. Even better discrimination has been obtained by applying stress in a stress humidity test. Having established accurate, reliable and discriminating test methods they were used to study the durability of structural epoxy adhesive bonds to aluminium as a function of alloy, pretreatment, adhesive and environment. It was established that the long term durability or adhesively bonded aluminium was directly related to the infulence of water migrating within the adhesive. Pretreatments differed in their ability to prevent hydration of the aluminium oxide by the water absorbed within the adhesive.

No description available.

No description available.

A small lathe has been modified to work under microprocessor control to enhance the facilities which the lathe offers and provide a wider operating range with relevant economic gains. The result of these modifications give better operating system characteristics. A system of electronic circuits have been developed, utilising the latest technology, to replace the pegboard with the associated obsolete electrical components. Software for the system includes control programmes for the implementation of the original pegboard operation and several sample machine code programmes are included, covering a wide spectrum of applications, including diagnostic testing of the control system. It is concluded that it is possible to carry out a low cost retrofit on existing machine tools to enhance their range of capabilities.

No description available.

No description available.

No description available.

Industrially developed countries are able to absorb modern techniques of science and technology quite readily; this is not the case for less-developed countries. Attempts made by developing countries have been ineffective due to factors not readily admitted. This thesis highlights the areas that need to be developed by under-developed countries, and covers economic, scientific and technological, and social aspects as well as technology transfer. Economic areas considered acknowledge that within any one country there should be proper procedures for planning economic and industrial projects (plant design) supported by efficient economic development strategy. Scientific and technological factors considered include the major areas that need to be developed in order to produce and/or deal with scientific and technological issues for the interest of the national development. Technology transfer areas considered include the necessity of building up a national body (system) responsible for dealing with activities and tasks of transferring foreign-made technology so that it can be employed effectively within the environment of the country. Social factors considered include the need to develop human resources which can be employed efficiently into the whole process of development, and particularly for the above proposed systems. Education and training are the major elements that ought to be tackled to produce skilled manpower and to overcome the social and cultural values and traditions that are inherited by the society. This thesis highlights the above areas in an attempt to plan and organise the development of science and technology, and their implementation into the development as a whole. Whilst recognising the problems of creating this sort of development in developing countries, the author considers the benefits to be obtained are much greater in the long run.