Magister Artium - MA / The local economy of the City of Cape Town supported by formal economic activities that are carried out through modern production processes whose existence is officially recognized and benefits from the protection of the authorities, and the informal activities that exist outside official control and protection systems. There is a dynamic connection between actors in the formal sector and those in the informal sector, which is seen at the levels of production, distribution and consumption of goods and services. This research investigates the linkages between informal and formal resource recovery activities in Devon Valley Landfill Site in Stellenbosch and Bellville South Landfill Site in Bellville. The two landfill sites are at the margins on the city economy where the formal and informal sectors interact and at times collide. Notwithstanding the negative health effects associated with the informal waste collections and the fact that informal waste collectors are neglected by policy makers in many developing countries in general and in South Africa in particular, evidence from Southern Africa has shown that the informal sector fosters considerable social, environmental and economic benefits that should be preserved. Informal recyclers constitute the essential workforce of the recycling business. These recyclers have undertaken various commercial and environmental tasks as a survival strategy long before the state and private entities became interested in participating in this profitable business. Waste recycling in most developing countries is a response to the inability of the formal economy to absorb a growing urban population, and the value placed on recyclable materials in the globalized economy. The study explores the various linkages between the informal sector and formal sector in the recycling industry and it examines the activities of these people involved in informal sector activities at the bottom end of the commonly neglected waste recycling chain. It also examines how waste pickers have developed livelihoods based on resource recovery activities at Devon Valley Landfill Site and Bellville South Landfill Site. This thesis is the result of an extensive literature review and primary data collection using a mixed methods approach. Primary sources of information consulted include, waste pickers, dealers, buy-back centres and manufacturing companies. This thesis attempts to establish the respective correlation between urban poverty, informal waste collection, and the recycling industries. The findings reveal that informal recycling is intricately linked to the formal recycling sector with waste pickers selling their waste to merchants and recyclers.

Typescript (photocopy). / Digitized by Kansas Correctional Industries

Rejeitos radioativos líquidos contendo compostos orgânicos precisam de atenção especial, porque os processos de tratamento disponíveis são caros e difíceis de serem gerenciados. A biossorção é uma potencial técnica de tratamento que tem sido estudada em rejeitos simulados. O termo biossorção é utilizado para descrever a remoção de metais, metalóides e/ou radionuclídeos por um material de origem biológica independentemente de sua atividade metabólica. Dentre as potenciais biomassas, os resíduos agrícolas apresentam características muito atraentes, pois possibilitam a remoção dos radionuclídeos presentes no rejeito utilizando um biossorvente de baixo custo. O objetivo deste estudo foi avaliar o uso potencial de diferentes biomassas originadas de produtos ou resíduos agrícolas (fibra de coco, casca de café e casca de arroz) no tratamento de rejeitos radioativos líquidos orgânicos reais. Foram realizados experimentos com essas biomassas incluindo i) Preparação, ativação e caracterização das biomassas; ii) Realização dos ensaios de biossorção e iii) Avaliação do produto da imobilização de biomassas em cimento. As biomassas foram testadas nas formas brutas e ativadas. A ativação foi realizada com soluções diluídas de HNO3 e NaOH. Os ensaios de biossorção foram realizados em frascos de polietileno, nos quais foram adicionados 10 mL do rejeito radioativo ou diluições do rejeito em água deionizada com o mesmo pH e 2 % da biomassa (m/v). No final do experimento, a biomassa foi separada por filtração e a concentração dos radioisótopos remanescente no filtrado foi determinada por ICP-OES e espectrometria gama. O rejeito estudado contém urânio natural (U (total)), amerício-241 e césio-137. Os tempos de contato adotados foram 30 min, 1, 2 e 4 horas e as concentrações estudadas variaram entre 10% e 100%. Os resultados foram avaliados por meio da capacidade máxima de sorção experimental e modelos ternários de isotermas e cinética. As maiores capacidades de sorção foram observadas com casca de café bruta, com valores aproximados de 2 mg/g de U (total), 40 x10-6 mg/g de Am-241 e 50 x10-9 mg/g de Cs-137 e, também, com fibra de coco ativada, com valores de 2 mg/g de U (total), 70 x10-6 mg/g de Am-241 e 40 x10-9 mg/g de Cs-137. As propriedades avaliadas na determinação da qualidade do produto de imobilização foram água livre, resistência mecânica, trabalhabilidade e tempo de pega. Os melhores produtos de imobilização para estas biomassas foram obtidos com uma relação água/cimento de 0,30, contendo 5%, 10% e 15% de casca café bruto, fibra de coco ativada e casca de café ativado, respectivamente. Estes resultados sugerem que a biossorção com casca de café bruta e fibra de coco sob a forma ativada podem ser aplicadas no tratamento de rejeitos radioativos líquidos orgânicos contendo urânio, amerício-241 e césio-137. / Radioactive liquid waste containing organic compounds need special attention, because the treatment processes available are expensive and difficult to manage. The biosorption is a potential treatment technique that has been studied in simulated wastes. The biosorption term is used to describe the removal of metals, non-metals and/or radionuclides by a material from a biological source, regardless of its metabolic activity. Among the potential biomass, agricultural residues have very attractive features, as they allow for the removal of radionuclides present in the waste using a low cost biosorbent. The aim of this study was to evaluate the potential use of different biomass originating from agricultural products (coconut fiber, coffee husk and rice husk) in the treatment of real radioactive liquid organic waste. Experiments with these biomasses were made including i) Preparation, activation and characterization of biomasses; ii) Conducting biosorption assays; and iii) Evaluation of the product of immobilization of biomasses in cement. The biomasses were tested in raw and activated forms. The activation was carried out with diluted HNO3 and NaOH solutions. Biosorption assays were performed in polyethylene bottles, in which were added 10 mL of radioactive waste or waste dilutions in deionized water with the same pH and 2% of the biomass (w/v). At the end of the experiment, the biomass was separated by filtration and the remaining concentration of radioisotopes in the filtrate was determined by ICP-OES and gamma spectrometry. The studied waste contains natural uranium, americium-241 and cesium-137. The adopted contact times were 30 min, 1, 2 and 4 hours and the concentrations tested ranged between 10% and 100%. The results were evaluated by maximum experimental sorption capacity and isotherm and kinetics ternary models. The highest sorption capacity was observed with raw coffee husk, with approximate values of 2 mg/g of U (total), 40 x10-6 mg/g of Am-241 and 50 x10-9 mg/g of Cs-137 and, also, with activated coconut fiber, with values of 2 mg/g of U (total), 70 x10-6 mg/g of Am-241 and 40 x10-9 mg/g of Cs-137. The properties evaluated to determine the quality of the immobilization product were free water, mechanical strength, workability and setting time. The best immobilization products for these biomasses were obtained with a water/cement ratio of 0.30, containing 5%, 10% and 15% of raw coffee husk, activated coconut fiber and activated raw coffee husk, respectively. These results suggest that biosorption with raw coffee husk and activated coconut fiber can be applied in the treatment of radioactive liquid organic wastes containing uranium, americium-241 and cesium-137.

Rejeitos radioativos líquidos contendo compostos orgânicos precisam de atenção especial, porque os processos de tratamento disponíveis são caros e difíceis de serem gerenciados. A biossorção é uma potencial técnica de tratamento que tem sido estudada em rejeitos simulados. O termo biossorção é utilizado para descrever a remoção de metais, metalóides e/ou radionuclídeos por um material de origem biológica independentemente de sua atividade metabólica. Dentre as potenciais biomassas, os resíduos agrícolas apresentam características muito atraentes, pois possibilitam a remoção dos radionuclídeos presentes no rejeito utilizando um biossorvente de baixo custo. O objetivo deste estudo foi avaliar o uso potencial de diferentes biomassas originadas de produtos ou resíduos agrícolas (fibra de coco, casca de café e casca de arroz) no tratamento de rejeitos radioativos líquidos orgânicos reais. Foram realizados experimentos com essas biomassas incluindo i) Preparação, ativação e caracterização das biomassas; ii) Realização dos ensaios de biossorção e iii) Avaliação do produto da imobilização de biomassas em cimento. As biomassas foram testadas nas formas brutas e ativadas. A ativação foi realizada com soluções diluídas de HNO3 e NaOH. Os ensaios de biossorção foram realizados em frascos de polietileno, nos quais foram adicionados 10 mL do rejeito radioativo ou diluições do rejeito em água deionizada com o mesmo pH e 2 % da biomassa (m/v). No final do experimento, a biomassa foi separada por filtração e a concentração dos radioisótopos remanescente no filtrado foi determinada por ICP-OES e espectrometria gama. O rejeito estudado contém urânio natural (U (total)), amerício-241 e césio-137. Os tempos de contato adotados foram 30 min, 1, 2 e 4 horas e as concentrações estudadas variaram entre 10% e 100%. Os resultados foram avaliados por meio da capacidade máxima de sorção experimental e modelos ternários de isotermas e cinética. As maiores capacidades de sorção foram observadas com casca de café bruta, com valores aproximados de 2 mg/g de U (total), 40 x10-6 mg/g de Am-241 e 50 x10-9 mg/g de Cs-137 e, também, com fibra de coco ativada, com valores de 2 mg/g de U (total), 70 x10-6 mg/g de Am-241 e 40 x10-9 mg/g de Cs-137. As propriedades avaliadas na determinação da qualidade do produto de imobilização foram água livre, resistência mecânica, trabalhabilidade e tempo de pega. Os melhores produtos de imobilização para estas biomassas foram obtidos com uma relação água/cimento de 0,30, contendo 5%, 10% e 15% de casca café bruto, fibra de coco ativada e casca de café ativado, respectivamente. Estes resultados sugerem que a biossorção com casca de café bruta e fibra de coco sob a forma ativada podem ser aplicadas no tratamento de rejeitos radioativos líquidos orgânicos contendo urânio, amerício-241 e césio-137. / Radioactive liquid waste containing organic compounds need special attention, because the treatment processes available are expensive and difficult to manage. The biosorption is a potential treatment technique that has been studied in simulated wastes. The biosorption term is used to describe the removal of metals, non-metals and/or radionuclides by a material from a biological source, regardless of its metabolic activity. Among the potential biomass, agricultural residues have very attractive features, as they allow for the removal of radionuclides present in the waste using a low cost biosorbent. The aim of this study was to evaluate the potential use of different biomass originating from agricultural products (coconut fiber, coffee husk and rice husk) in the treatment of real radioactive liquid organic waste. Experiments with these biomasses were made including i) Preparation, activation and characterization of biomasses; ii) Conducting biosorption assays; and iii) Evaluation of the product of immobilization of biomasses in cement. The biomasses were tested in raw and activated forms. The activation was carried out with diluted HNO3 and NaOH solutions. Biosorption assays were performed in polyethylene bottles, in which were added 10 mL of radioactive waste or waste dilutions in deionized water with the same pH and 2% of the biomass (w/v). At the end of the experiment, the biomass was separated by filtration and the remaining concentration of radioisotopes in the filtrate was determined by ICP-OES and gamma spectrometry. The studied waste contains natural uranium, americium-241 and cesium-137. The adopted contact times were 30 min, 1, 2 and 4 hours and the concentrations tested ranged between 10% and 100%. The results were evaluated by maximum experimental sorption capacity and isotherm and kinetics ternary models. The highest sorption capacity was observed with raw coffee husk, with approximate values of 2 mg/g of U (total), 40 x10-6 mg/g of Am-241 and 50 x10-9 mg/g of Cs-137 and, also, with activated coconut fiber, with values of 2 mg/g of U (total), 70 x10-6 mg/g of Am-241 and 40 x10-9 mg/g of Cs-137. The properties evaluated to determine the quality of the immobilization product were free water, mechanical strength, workability and setting time. The best immobilization products for these biomasses were obtained with a water/cement ratio of 0.30, containing 5%, 10% and 15% of raw coffee husk, activated coconut fiber and activated raw coffee husk, respectively. These results suggest that biosorption with raw coffee husk and activated coconut fiber can be applied in the treatment of radioactive liquid organic wastes containing uranium, americium-241 and cesium-137.

Thesis (Master of Engineering in Chemical Engineering)--Cape Peninsula University of Technology, 2017. / Pre-treatment of wastewater such as that from poultry slaughterhouses, which contains fats, oil,and grease (FOG) is necessary prior to the primary biological treatment of the wastewater to meet legislated discharge standards and to prevent environmental pollution. Physico- chemical pre-treatment is often applied to remove FOG in poultry slaughterhouse wastewater (PSW) before biological treatment. These pre-treatment methods, in particular physical pre- treatment systems, use synthetic chemicals, known to cause environmental contamination challenges, with FOG being inefficiently removed in certain instances. Biological techniques such as bio-delipidation using enzymatic catalysis for the pre-treatment of FOG-laden PSW could enhance the efficiency of the downstream biological treatment processes. This research focused on further bio-delipidation of PSW pre-treated with a dissolved air flotation system (DAF) for FOG removal using microbial lipases from bacterial strains isolated from the PSW itself. Bacterial strains (n = 2) isolated from the PSW and screened for their potential to produce lipases were found to have a higher bio-delipidation potential when compared to other isolates (n = 18). Both isolates were identified using 16s rRNA as Bacillus sp., i.e. both Bacillus cereus AB1 (BF3) and CC-1 (B3O). These isolates were used to produce lipases, whereby are sponse surface methodology (RSM) was used to optimise pH (4-8) and temperature (30-60°C) as critical production conditions. achieving an optimum lipase production was achieved, with activity of 11.25 U/mL at 60°C, a pH of8 for BF3, and 15.50U/mL at 45°C and pH of 8.8 for B3O respectively, after 72 hours of bioreactor operation. The enzymes produced from both isolates were partially purified using a Bio-Rad size exclusion chromatography column (Bio-Gel® P-60) prior to use in subsequent experiments. The presence and activity of lipase were further determined using p-nitrophenyl acetate (p- NPA) as a substrate with the functionality of the semi-purified enzymes being characterized by optimizing the conditions in which the enzymes were required to function. Lipase activity was enhanced by Mg2+ while Fe2+, Na+, K+, Ca2+ were observed to have an inhibitory effect on the enzymes from both strains. Similarly, reduced stability of the lipases in organic solvents, namely toluene, methanol, and isopropanol, was also established. Additionally, detergents, Triclosan (TCS) (5-chloro-2-(2,4-dichlorophenoxy-phenol) and trichlorocarbonilide (3,4,4- trichlorocarbonilide)(TCC), usually found in PSW as antimicrobial and disinfectant agents to sanitise poultry product processing facilities, were used assess the activity of the enzyme in their presence at a concentration of 30% (v/v) (although these anti- microbial agents are used in minute quantities in cleaning products). The lipases from isolate BF3 maintained an activity of 91.43% and 81.36% in the presence of TCS and TCC, while that of B3O enzyme had 85.32% and 73.91% acitivity, when compared to the reference (control) experiments. The bio-delipidation efficacy was studied under varying pH and temperature conditions using DAF pre-treated PSW, observing a further removal efficiency of fatty acids from the protein- laden PSW at different pH and temperature. Bio-delipidation was found to be largely influenced by pH, as a pH below 7 and above 10 at 40°-45°C, calculated in the bio- delipidation efficiency reduction to below 50%. The temperature range mentioned, i.e 40°- 45°C, had a positive effect on further deffating of the protein-rich DAF pre-treated PSW, as high removal efficiency was observed at this temperature range. This could be due to the characteristic of the enzymes used,or the formation of stable FOG agglomerates and/oremulsion. Overall, a DAF effluent containing residual FOG and proteins was bio-delipidated effectively using enzymes from the PSW isolates, achieving further removal of FOG and proteins by 64.35% to 80.42%, culminating in tCOD reduction and reduced PSW turbidity, further resulting in improved wastewater quality characteristics meeting disposal standards. This study demonstrated that sequential DAF pre-treated PSW bio-delipidation has the potential to enhance the efficiency of downstream biological anaerobic treatment processes for PSW by further reducing residual FOG from a DAF system.

Thesis (Master of Engineering in Chemical Engineering)--Cape Peninsula University of Technology, 2018. / Brewer’s spent grain (BSG), a solid residue obtained from brewing beer, is gaining attention in the food, cosmetics and pharmaceutical industry due to its use as natural source of colorants, texturisers, functional ingredients and preservatives. It is therefore necessary to develop an economically viable method for the extraction, isolation or enrichment of these compounds. Although literature shows the technical feasibility of extraction of bioactive compounds from BSG at laboratory bench scale, none of the reviewed literature could provide adequate information necessary to determine the economic feasibility of the process at commercial scale. The aim of this study was to investigate the technical and economic viability of a commercial process for the recovery of antioxidant rich polyphenolic compounds from brewers spent grain using organic solvents and/or water. The objectives were to select the best solvent, perform the optimisation and kinetic study, as well as to model and simulate the extraction process with the aim of performing an economic analysis. In selecting the best solvent, maceration and soxhlet extraction were used for the recovery of polyphenolic compounds. Acetone and acetone: water mixtures, ethanol and ethanol: water mixtures as well as pure water were used as solvents. The evaluation of the best solvent was measured by the total phenolic content (TPC), flavonol content, the antioxidant activity using 2.2-diphenyl-1-picrylhydrazyl (DPPH) assay and ferric reducing antioxidant power (FRAP) assay. The study performed optimisation for various operational parameters (time, temperature, solvent to feed ratio and shaking speed) using response surface method. The effect of temperature on the extraction kinetics was also investigated with experiments being carried out at 20°C, 40°C and 80°C. Antioxidant activity was detected in all BSG extracts, but water showed the highest global yield and rates of extraction. The optimum conditions were found at 15 min reaction time, temperature of 40 °C, shaking speed of 185 rpm and solvent to solid ratio of 27.5: 1. So-Macdonald model was a suitable fit for the experimental data with a R2-value range of (0.85 < r2 < 0.995). A processing scenario was proposed as a base case, upon which subsequent scenarios were generated to improve the operation or the economics. SuperPro Designer® (Intelligen, Inc) was used for modelling the proposed process, for simulation and for the economic evaluation. Four alternative schemes from the base case simulation were developed for optimisation of the process. The process was found to be economically feasible and attractive with a return of investment (ROI) of 48.45 % for alternative scheme 4. The results in this thesis highlight the likely economic feasibility of the extraction of polyphenolic compounds from BSG at commercial scale by the maceration method.

Global energy requirements are heavily dependent on fossil fuels such as oil, coal, and natural gas. With the expectation of fossil fuels being exhausted in the future, novel strategies need to be discovered for alternative energy generation. Biofuels such as acetone, butanol, ethanol, and hydrogen gas are gaining interest as high value energy sources. These fuels can be produced by anaerobic clostridia as metabolic byproducts of fermentation. The capability to produce these biofuels has been widely studied using glucose or other common feedstocks. Biofuels from renewable and industrial waste feedstocks such as algae and cheese whey may have significant implications on the efficiency of biofuel production, where the price associated with feedstocks is considered a major bottleneck in biotechnology processes. Algae and cheese whey are both rich in organic nutrients and can be utilized by clostridia to produce not only biofuels, but also bioacids, which are considered fuel intermediate compounds. Additionally, understanding microbial communities both in the biosphere and within bioreactors can provide knowledge on microbial relationships and novel microbes, and provide knowledge to optimize engineered systems for biofuels and bioremediation strategies. In this study, a comprehensive investigation of the Logan City Wastewater Lagoon System at the microbial level was executed. Microalgae were utilized for the production of acetone, butanol, and ethanol using Clostridium saccharoperbutylacetonicum. High-throughput 454 pyrosequencing technology was utilized to understand the biogas-producing microbial consortium within an algal-fed anaerobic digester inoculated with lagoon sludge. This technology platform was also utilized to study the microbial diversity of a municipal waste remediating community while probing for clostridia capable of producing biofuels. Bioproduct producing clostridia from this system were isolated and employed using cheese whey as feedstock for the production of hydrogen, ethanol, acetic acid, butyric acid, and lactic acid. Integrating fundamental science with engineering strategies was demonstrated using this lagoon system. To optimize and fully understand and manage anaerobic microbial systems, an understanding of their phylogeny and their capabilities are vital for success at the industrial level for the production of high value bioproducts.

Every attempt by the NSW State Government to site waste treatment and disposal facilities has been met by opposition from local communities. Increasing interest is being shown in community consultation and public participation in the decision-making processes concerning the siting of waste management technologies. This thesis examines the rationale behind, and potential of, community consultation through an examination of two case studies. The thesis concludes that the reasons and remedies for local opposition typically given by experts and regulatory authorities are flawed. The engineering concerns which have dominated approaches to choosing and siting waste management technologies are of little consequence to the way in which communities judge whether the facilities pose an acceptable societal risk. The issues of concern to communities include the legitimacy of the decision-making process, the relative fairness of the decision to site, and whether the institutions responsible for managing and operating the technologies are trustworthy. If waste management technologies rely on local acceptability for their siting, the approach taken to resolve the waste problem must include societal as well as engineering concerns in the design of courses of action to manage the risk. / Doctor of Philosophy (PhD)

In Cameroon, and most other developing countries, the problem of inefficient municipal solid waste management ( MSWM ) is endemic. This is easily identified by persistent heaps of uncollected waste found on street sides or ubiquitous illegal dumps. This thesis examines the sustainability of MSWM in Cameroon using two contrasting city cases of Yaoundé ( 1.5m people ) and Bamenda ( 300 000 people ). As major contributions the thesis generates the much - needed basic original data, critically examines and compares the sustainability of MSWM in both cities ' systems, evaluates the environmental impacts and uses these findings to suggest valuable research, policy and strategic - planning recommendations needed to make both systems, and others in similar situations, sustainable. To achieve these goals multiple triangulated methods were used. In Bamenda, where reliable basic data are non - existent, solid waste from sampled households was collected and analysed for generation rates, quantities and characteristics. In both cities questionnaire were administered to sampled household units selected from four stratified quarters. The survey questions addressed waste management issues and sustainability indicators that were needed to study, compare and evaluate the systems within the wider concept of the waste management hierarchy. The statistical programme for social sciences ( SPSS ) computer software was used to analyse the survey results. Field observations, interviews and a review of secondary sources complemented the data. New findings show that Bamenda city generates 120 - 160 tonnes of municipal solid waste daily ( 0.40-0.54 kg per capita ), 76 % of which is biodegradable and 24 % non - biodegradable. About 90 % of all solid waste comes from households. Bamenda Urban Council ( BUC ) regularly covers only 1 / 20th of the city area and collects and transports 20 - 30 tonnes of waste from its skips, accounting for only 17 - 25 % of the total daily waste generation. The waste is disposed of at an uncontrolled dump on the Mezam River flood plain. The citizens illegally dump the rest. Skips are crucial to the system but their total capacity and access are grossly inadequate ( 37m ³ over 28 sites ), with a further 465m ³ needed. Citizens move an average of 105 m to waste disposal sites. This suggests a sustainable inter - skip distance of 210 m for Bamenda city, far from the present 700 m. Yaoundé ' s daily per capita MSW generation rate is estimated at 0.79 kgs or 1200 tonnes for the entire city, three - quarters of which is biodegradable. Only one - third of the city area is regularly served with about 40 - 50 % ( ~ 540 tonnes ) of the waste collected and disposed of at the sanitary landfill on the Nfoulou River valley. Total available skip capacity is 1440m ³ with 3048m ³ lacking. The primary waste disposal average distance is 87 m. Yaoundé and Bamenda cities are unique in physical conditions and status but neither is able to deal adequately with the increasing waste generation rates, quantities and varieties that are driven by rapid urban population growth, spatial expansion and improved affluence and consumption among selected groups. Yaoundé ' s management has an edge over Bamenda ' s in terms of performance rates but leaves behind five times more uncollected and illegally dumped waste than Bamenda. Though Yaoundé ' s system is private and Bamenda ' s is public, both systems apply the same conventional approach that concentrates on imported technologies while neglecting waste prevention, recycling, safe disposal, involvement and integration of citizens and other stakeholders. This limited and monopolistic approach makes the system unworkable and equally creates huge environmental and health - related problems present at all the stages of the waste management cycle. Government devolves the waste function to urban councils but centralises funds and power. Its waste policies are limited, fragmented and confusing. The garbage tax law yields only 5 % in Bamenda and 7 % in Yaoundé, making both cities rely heavily on extra financial support from Cameroon and abroad. In all, neither city in the study demonstrates sustainability in any aspects of its MSWM system. The existing systems are not sustainable. A new system based on an integrated sustainable model operated within the context of good urban governance is proposed. This model accommodates the uniqueness of cities and is recommended for other cities in the country, Africa and the developing world. / Thesis (Ph.D.)--School of Social Sciences, 2004.

Uranium mill tailings from the Ranger mine, located in the Alligator Rivers Region of the Northern Territory, Australia, were examined to assess the effects of weathering and diagenesis on their long-term geochemical stability. Run of mill uranium tailings are a complex heterogeneous mixture of lithogenic ( primary gangue minerals and weathering products ) and secondary ( components that form during milling ) minerals, residual process chemicals and biogenic ( products of biological activity ) phases. Following transfer to the tailings storage facility, post depositional reactions alter the mineralogical and hydrochemical characteristics of the tailings solids and pore waters in accordance with weathering and diagenetic processes. In this thesis, a detailed examination of tailings cores and pore waters, kinetic column test work and geochemical modelling was combined with results from earlier studies to examine the key processes governing the geochemical stability of the Ranger tailings. Conclusions drawn from the work clearly demonstrates that the solid state speciation and mobility of metals and radionuclides in the tailings pile are governed by the processes of oxidative dissolution of sulfide minerals, weathering of phyllosilicates and organic matter diagenesis. The processes are spatially dependent, evolve over time and are influenced by the following key factors : 1. Tailings water content or degree of saturation ; 2. The nature and content of organic matter in the tailings ; 3. Redox potential of the tailings solid - pore water interface ; and 4. The specific reactivity of precursor minerals ( primary / secondary ) from the milling process and pore water solutes. Combined, these processes lead to the formation of authigenic minerals, which control the solubility of pore water constituents. These mechanisms will also have a profound impact on the long-term geochemical stability of the tailings pile and, as such, will need to be taken into account in the design, management and closure of the final tailings repositories at the Ranger site. / Thesis (Ph.D.)--School of Earth and Environmental Sciences, 2004.