No description available.

No description available.

No description available.

Metal building roof systems with C- or Z-section purlins require restraint to resist lateral forces developed within the roof system under gravity loads. The currently available procedures for predicting these forces have been shown to be inaccurate for sloped roofs and difficult to apply to roof configurations with multiple points of anchorage. A new method has been developed that builds on the previous research and accurately addresses roof slope as well as the use of multiple anchorage devices of finite stiffness. The development of this method relied on a stiffness model, similar to that used by previous researchers, which was updated and calibrated to the results of recently completed tests. The calculation procedure explicitly addresses the location and stiffness of anchorage devices as well as the inherent stiffness of the purlin system to accurately distribute the anchorage forces. / Master of Science

No description available.

Neste trabalho apresentamos a construção de um novo sistema experimental para aprisionamento de átomos e moléculas. Trata-se de uma armadilha de dipolo cruzada totalmente óptica, formada por um laser de fibra com 40 W de potência com comprimento de onda em 1064 nm. Nesse sistema foi demonstrado o aprisionamento de átomos Rb e K e moléculas Rb2. Realizamos dois experimentos distintos neste se novo sistema: No primeiro, estudamos a evolução temporal de amostras dos isótopos 85Rb e 87Rb na armadilha de dipolo cruzada. Pudemos medir pela primeira vez o processo de mudança de estrutura hiperfina em átomos sem a presença de luz ressonante, e observamos a fotoassociação dos átomos pelo laser da armadilha de dipolo. E no segundo, desenvolvemos uma técnica que permite o estudo rápido e direto do decaimento no número de moléculas de Rb2 na armadilha. Com essa técnica, observamos também o comportamento dessas moléculas na presença de átomos preparados em um determinado estado hiperfino do estado fundamental. Estes resultados juntamente com um desenvolvimento teórico, nos sugerem novas perspectivas rumo a produção de um sistema que possa produzir e aprisionar moléculas KRb no estado fundamental 1Σ+ (v = 0). / In this work, we present the construction of a new experimental system for trapping atoms and molecules. It is an all optical crossed dipole trap, formed by a fiber laser with 40 W of power at 1064 nm. In this system, we have trapped K and Rb atoms as well as Rb2 molecules. We have carried out two experiments in this new system. In the first, we studied the temporal evolution of atomic samples of different isotopes, 85Rb and 87Rb, in the crossed trap dipole. We were able to measure for the first time the hyperfine-changing collisions of atoms in the absence of resonant light, and we have observed photoassociation of atoms by the dipole trap laser beam. In the other experiment, we have developed a technique that allows us to study the trapped molecule population decay in the trap. It was also observed the molecule population decay in the presence of atoms prepared in a given hyperfine state of the ground state. These results together with a theoretical development may suggest us new perspectives towards the production of a system that can produce and trap KRb molecules in the ground state 1Σ+ (v = 0).

Neste trabalho, estudamos a fotoassociação de átomos de rubídio no regime de curto alcance. Realizamos espectroscopia por perda de átomos em uma armadilha magneto-óptica de 85Rb usando um laser de fibra de alta potência, o qual possuia largura de linha da ordem de 1MHz e 50W de potência no intervalo de 1060nm a 1070nm. Dois níveis vibracionais do potencial excitado 0u+ foram observados (v=137 e v=138). Além disso, medimos o tempo de vida de uma armadilha óptica de dipolo cruzada. Como esperado, o tempo de vida é menor quando o laser está sintonizado na ressonância. Um modelo teórico prevê a distribuição dessas moléculas nos níveis vibracionais do estado eletrônico fundamental após o processo de fotoassociação. Os resultados, nos sugerem perspectivas para a produção de moléculas de Rb2 no estado vibracional fundamental. / In this work, we studied short-range photoassociation of rubidium atoms. We realize trap-loss spectroscopy in a magneto-optical trap of 85Rb using high power fiber laser, which had around 1MHz linewidth and 50W power at 1060nm to 1070nm interval. Two vibrational levels of the 0u+ excited potential were observed (v=137 e v=138). Besides that, we measured the lifetime of a crossed optical dipole trapped. As expected, the lifetime is shorter when the laser is tuned on resonance. A theoretical model predicts the molecular distribution in the vibrational levels of electronic ground state. The results suggest us perspectives to produce Rb2 molecules in the ground vibrational state.

Neste trabalho apresentamos a construção de um novo sistema experimental para aprisionamento de átomos e moléculas. Trata-se de uma armadilha de dipolo cruzada totalmente óptica, formada por um laser de fibra com 40 W de potência com comprimento de onda em 1064 nm. Nesse sistema foi demonstrado o aprisionamento de átomos Rb e K e moléculas Rb2. Realizamos dois experimentos distintos neste se novo sistema: No primeiro, estudamos a evolução temporal de amostras dos isótopos 85Rb e 87Rb na armadilha de dipolo cruzada. Pudemos medir pela primeira vez o processo de mudança de estrutura hiperfina em átomos sem a presença de luz ressonante, e observamos a fotoassociação dos átomos pelo laser da armadilha de dipolo. E no segundo, desenvolvemos uma técnica que permite o estudo rápido e direto do decaimento no número de moléculas de Rb2 na armadilha. Com essa técnica, observamos também o comportamento dessas moléculas na presença de átomos preparados em um determinado estado hiperfino do estado fundamental. Estes resultados juntamente com um desenvolvimento teórico, nos sugerem novas perspectivas rumo a produção de um sistema que possa produzir e aprisionar moléculas KRb no estado fundamental 1Σ+ (v = 0). / In this work, we present the construction of a new experimental system for trapping atoms and molecules. It is an all optical crossed dipole trap, formed by a fiber laser with 40 W of power at 1064 nm. In this system, we have trapped K and Rb atoms as well as Rb2 molecules. We have carried out two experiments in this new system. In the first, we studied the temporal evolution of atomic samples of different isotopes, 85Rb and 87Rb, in the crossed trap dipole. We were able to measure for the first time the hyperfine-changing collisions of atoms in the absence of resonant light, and we have observed photoassociation of atoms by the dipole trap laser beam. In the other experiment, we have developed a technique that allows us to study the trapped molecule population decay in the trap. It was also observed the molecule population decay in the presence of atoms prepared in a given hyperfine state of the ground state. These results together with a theoretical development may suggest us new perspectives towards the production of a system that can produce and trap KRb molecules in the ground state 1Σ+ (v = 0).

Neste trabalho, estudamos a fotoassociação de átomos de rubídio no regime de curto alcance. Realizamos espectroscopia por perda de átomos em uma armadilha magneto-óptica de 85Rb usando um laser de fibra de alta potência, o qual possuia largura de linha da ordem de 1MHz e 50W de potência no intervalo de 1060nm a 1070nm. Dois níveis vibracionais do potencial excitado 0u+ foram observados (v=137 e v=138). Além disso, medimos o tempo de vida de uma armadilha óptica de dipolo cruzada. Como esperado, o tempo de vida é menor quando o laser está sintonizado na ressonância. Um modelo teórico prevê a distribuição dessas moléculas nos níveis vibracionais do estado eletrônico fundamental após o processo de fotoassociação. Os resultados, nos sugerem perspectivas para a produção de moléculas de Rb2 no estado vibracional fundamental. / In this work, we studied short-range photoassociation of rubidium atoms. We realize trap-loss spectroscopy in a magneto-optical trap of 85Rb using high power fiber laser, which had around 1MHz linewidth and 50W power at 1060nm to 1070nm interval. Two vibrational levels of the 0u+ excited potential were observed (v=137 e v=138). Besides that, we measured the lifetime of a crossed optical dipole trapped. As expected, the lifetime is shorter when the laser is tuned on resonance. A theoretical model predicts the molecular distribution in the vibrational levels of electronic ground state. The results suggest us perspectives to produce Rb2 molecules in the ground vibrational state.

The objective of this research is to create a computationally efficient seismic analysis framework for cold-formed steel (CFS) framed-buildings supported by hysteretic nonlinear models for CFS members and screw-fastened connections. Design of CFS structures subjected to lateral seismic forces traditionally relies on the strength of subassemblies subjected to lateral loading of systems, such as strapped/sheathed shear walls and diaphragms, to provide adequate protection against collapse. Enabling performance-based seismic design of CFS buildings requires computationally efficient and accurate modeling tools that predict the nonlinear cyclic behavior of CFS buildings, the individual CFS components and connections. Such models should capture the energy dissipation and damage due to buckling and cross-sectional deformations in thin-walled CFS components subjected to cyclic loads such as those induced by earthquakes. Likewise, models for screw-fastened CFS connections should capture the energy dissipation and damage due to tilting, bearing, or screw shear when subjected to cyclic loading. In this dissertation, an analysis framework for CFS structures that captures the nonlinear cyclic behavior of critical components including axial members, flexural members, and screw fastened connections is presented. A modeling approach to simulate thin-walled behavior in CFS members is introduced where parameters were developed using results from an experimental program that investigated the cyclic behavior and energy dissipation in CFS axial members and flexural members. Energy dissipation and cyclic behavior of CFS members were characterized for members experiencing global, distortional and local buckling. Cyclic behavior and energy dissipation in thin steel plates and members was further investigated through finite element analysis in ABAQUS to provide a strategy for modeling steel columns cyclic behavior including local buckling. Model parameters were developed as generalized functions of the hysteretic energy dissipated and slenderness. The capabilities of the analysis framework are demonstrated through simulations of CFS wood sheathed shear wall cyclic responses validated with experimental results from full scale shear wall tests. / Ph. D.