The solid state, hydrothermal and flux methods were used for the investigation of alkaline earth and transition metal borophosphate compounds. The products and the phase relations were investigated by XRD, IR, DTA, and EDX methods. The solid state reactions of several boron compounds with different phosphating agents have been studied in the temperature range of 400-1200 oC. Hydrothermal and flux techniques were performed at 150 oC and 1200 oC, respectively. On the other hand, an attempt has been made to prepare a novel borophosphate compound MIIMIV[BPO7] (where MIV= Zr4+, Si4+, and MII= Sr2+, Ca2+) by solid state reactions and to investigate intermediate and final products. (NH4)2HPO4 and NH4H2PO4 were used as a phosphating agent. For the synthesis of these new compounds, the following reaction was predicted using the stoichiometric amount of the reactants: 2MIVO2 + 2MIICO3 + B2O3 + 2(NH4)2HPO4 &amp / #8594 / 2MIIO.MIVO2.B2O3.P2O5 + 4NH3 + 3H2O + 2CO2 (According to IUPAC formulation for the compounds composed of oxides) In the case of MIV=Zr4+ and MII=Sr2+, the formation of ZrSr[BPO7] was observed together with ZrO2 and SrBPO5. The formation of a new phase was proved by indexing the XRD pattern of the product after separating ZrO2 and SrBPO5 lines. Its crystal system was found to be orthorhombic and the unit cell parameters are a=11.85&Aring / , b=12.99 &Aring / , c=17.32 &Aring / . IR analysis shows that there is [BPO7]6- bands in the spectrum. At higher temperatures, Sr7Zr(PO4)6 was obtained. In the case of MIV=Si4+, SrBPO5 was the main product together with unreacted SiO2. At 1100 oC, Si4+ entered SrBPO5 structure and the product was indexed in orthorhombic system with a=8.9243 &Aring / , b=13.1548 &Aring / , and c=5.4036 &Aring / . Several other M:B:P ratios were tried for solid state systems. For compositions with different cations (such as Al3+, Ca2+, Na+), reactions generally pass through metal phosphates and BPO4. The X-ray diffraction powder pattern and infrared spectrum of several intermediate products obtained at different temperatures were presented and the several phase relations were investigated. The DTA and EDX analyses of some products were also reported.

The Maya of Central America developed a complex society: among their many achievements they developed a writing system, complex calendar and were prolific builders. The buildings of their large urban centres, such as Copan in Honduras, were decorated with painted stucco, moulded masks, carving and elaborate murals, using a range of coloured pigments. In this study the paints used on the buildings of Copan and some ceramic sherds have been investigated, non-destructively, using micro-Raman spectroscopy, micro-ATR infrared spectroscopy, environmental scanning electron microscopy with energy dispersive X-ray analysis (ESEM-EDX) and FTIR-ATR imaging spectroscopy. The paint samples come from four buildings and one tomb covering three time periods in the four hundred year history of Copan. The main pigment used in the red paint on these samples was identified as haematite, and the stucco as a mixture of calcite particles dispersed throughout a calcite-based lime wash stucco. The composition and physical nature of the stucco changed through time, indicating a refining of production techniques over this period. A range of minor mineral components have been identified in each of the samples including rutile, quartz, clay and carbon. The presence and proportion of these and other minerals differed in each sample, leading to unique mineral signatures for the paint from each time period. Green and grey paints have also been identified on one of the buildings, the Rosalila Temple. The green pigment was identified as a celadonite-based green earth, and the grey pigment as a mixture of carbon and muscovite. The combination of carbon and mica to create a reflective paint is a novel finding in Maya archaeology. The high spatial resolution of the micro-FTIR-ATR spectral imaging system has been used to resolve individual particles in tomb wall paint and to identify their mineralogy from their spectra. This system has been used in combination with micro-Raman spectroscopy and ESEM-EDX mapping to characterize the paint, which was found to be a mixture of haematite and silicate particles, with minor amounts of calcite, carbon and magnetite particles, in a sub-micron haematite and calcite matrix. The blending of a high percentage of silicate particles into the haematite pigment is unique the tomb sample. The stucco in this tomb wall paint has finely ground carbon dispersed throughout the top layer providing a dark base for the paint layer. Changing paint mixtures and stucco composition were found to correlate with changes in paint processing techniques and building construction methods over the four hundred years of site occupation.

Iron-tannate dyes have been used for thousands of years and on many continents to colour materials that are now part of our cultural heritage shades of black, grey, or brown. Cellulosic and proteinaceous yarns and woven textiles have been dyed with iron-tannate dyes to form objects or components of objects for domestic and ceremonial use. Unfortunately, the longevity and useful lifetime of iron-tannate dyed objects is threatened by the dye itself which accelerates the degradation of organic materials through metal-catalysed oxidation and acid-catalysed hydrolysis. The accelerated degradation causes weakening, discolouration, and embrittlement of the organic materials at a faster rate than undyed equivalents and if left unimpeded, weakens the objects to the point that they are no longer able to be exhibited without damage. In some cases the degradation is so great that the dyed areas of the objects have crumbled to dust. At present there is no suitable chemical stabilisation method available with which to inhibit this degradation. An aqueous treatment is available for successfully stabilising paper containing iron gall ink; iron gall ink is chemically similar to iron-tannate dye. However, the aqueous nature of this treatment makes it unsuitable for weakened fibres, water soluble components, and water sensitive materials which may be part of a composite material containing iron-tannate dye. Non-aqueous treatments are therefore urgently needed in order to preserve our iron-tannate dyed cultural heritage for future generations.In this project a range of non-aqueous antioxidants and a non-aqueous deacidifier (described in Chapter 8) were tested alongside existing aqueous treatment in order to establish their ability to slow down the degradation of a range of model iron-tannate dyed textiles (Chapters 9 and 10). Model textiles were developed as part of the project (Chapters 3-5) to be substitutes for historic materials in these stabilisation studies. Validation of the model textiles for this purpose (Chapter 6) involved the comparison of the model textiles with selected historic iron-tannate dyed objects within the British Museum’s collection (Chapter 6). The historic objects and the properties of the model textiles before and after accelerated ageing (Chapters 5 and 6) and before and after treatment application (Chapters 9 and 10) have been characterised using a variety of analytical techniques (Chapter 2). In order to determine which accelerated ageing conditions were the most suitable for this project various combinations of elevated temperature and either cycling or stable relative humidity were tested for their ability to produce noticeable changes in the properties of the dyed model textiles within four weeks of ageing (Chapter 7). This project is an AHRC/EPSRC funded Science and Heritage Programme PhD in which the British Museum has been a collaborative institution. Among other wider dissemination methods, research from this project has been presented to the public on numerous occasions at gallery tours and Science Day events at the British Museum.

This thesis is dealing with application of Correlative Probe and Electron Microscopy. All measurements were carried out by atomic force microscope LiteScope which is designed especially to be combined with electron microscopes. Advantages of Correlative AFM/SEM Microscopy are demonstrated on selected samples from field of nanotechnology and material science. Application of the correlative imaging was proposed and then realized particularly in case of low-dimensional structures and thin films. Further, this thesis deals with the possibility of combining Correlative AFM/SEM Microscopy with other integrated techniques of an electron microscope such as Focused Ion Beam and Energy Dispersive X-rays Spectroscopy.

Tato diplomová práce zkoumá flexibilní materiál k produkci elektřiny založený na piezoelektrickém polymeru Polyvinylidenfluorid (PVDF). Inkorporací piezoaktivní keramiky lze vlastnosti piezoelektrického polymeru PVDF významně zlepšit a převést na užitečnou elektrickou energii. PVDF byl vytvořen elektrostatickým zvlákňováním do vláken o tloušťce 1,5-0,3 µm a poté studován různými analytickými metodami. Tato práce nabízí popis elektrostatického zvlákňování, přípravu vzorků a teoretický úvod do analytických metod, kterým byly vzorky podrobeny. Morfologie a distribuce nanostrukturované keramiky do polymerní matrice PVDF byla pozorována použitím skenovací elektronové mikroskopie (SEM) a energiově disperzní spektroskopie (EDX). Pro tvorbu fáze a podrobné fázové složení byly vzorky charakterizovány infračervenou spektroskopií s Fourierovou transformací (FTIR). Práce také obsahuje analýzu s použitím Ramanovy spektroskopie, metody používané k identifikaci a porovnání chemických sloučenin. Elektrické vlastnosti byly studovány dielektrickou spektroskopií a je poskytnuta korelace se složením. Jednotlivé komponenty dotovaných vláken jsou charakterizovány a vyhodnocovány v souvislosti s jejich budoucím využitím v senzorech.

This thesis deals with ionic liquids, their conductivity and the action of the electrode materials, separators and current collectors. The theoretical part is focused on the properties of ionic liquids, Li-ion batteries, corrosion, conductivity and analysis elements. The practical part is focused on the production of graphite electrodes, measuring the conductivity of ionic liquids with different parts of lithium – ion battery and measuring the potential window. Also, there is the effect of ionic liquids described in these parts.

Apis mellifera Linnaeus (1758) è un insetto eusociale conosciuto in tutto il mondo sia per la produzione di miele sia per il suo ruolo di impollinatore, uno dei servizi ecosistemici fondamentali per la biodiversità del pianeta. Durante la sua attività di foraggiamento, l’ape è esposta agli inquinanti ambientali tra cui il particolato atmosferico aerodisperso (PM). Il particolato atmosferico può depositarsi sul corpo dell’insetto e infine contaminare anche i prodotti apistici come polline e miele. Il PM può avere diverse dimensioni (es. PM10, PM2.5, PM0.1), composizione chimica, morfologia e fonti di emissione (naturale o antropica). Nel presente elaborato di tesi, tecniche di microscopia elettronica a scansione (SEM-EDX) sono state utilizzate per caratterizzare la contaminazione da PM di origine antropica del corpo dell’ape e dei suoi prodotti (Capitolo 2 e Capitolo 3) e analisi molecolari per studiare gli eventuali effetti sub-letali sul microbiota intestinale di api esposte ai PM per via orale (Capitolo 4). / Apis mellifera Linnaeus (1758) order Hymenoptera family Apidae, is a eusocial insect widely known for its role in pollination, a fundamental ecosystem service for plant biodiversity and ultimately for the planet. During flight and foraging activity, the honey bee can collect airborne particulate matter (PM) on their own body, especially on the forewings, and can also contaminate bee products as pollen and honey. Particulate matter can originate from natural or anthropic sources, and is characterised by size (e.g., PM10, PM2.5, PM0.1), chemical composition, and morphology. In this thesis, honey bee, pollen and honey were used as bioindicator of PM – from coarse to ultrafine – in industrial areas of the Po Valley, Italy (Chapter 2 and Chapter 3). The (sub-lethal) effects of Titanium dioxide – a widespread airborne PM1 pollutant – on the honey bee through oral exposure was then investigated (Chapter 4). The technique used to analyse the PM contaminating bees and bee products is the scanning electron microscopy (SEM) coupled with X-ray spectrometer (EDX). EDX spectra allowed us to obtain chemical information from specimens, while backscattered-electron (BSE) imaging and elemental mapping provided both compositional and topographic information of PM.

Sulfate-reducing bacteria (SRB) frequently occur in the deep granitic rock aquifers at the Äspö Hard Rock Laboratory (Äspö HRL), Sweden. The new SRB strain Desulfovibrio äspöensis could be iso-lated. The objective of this project was to explore the basic interaction mechanisms of uranium, curium, neptunium and plutonium with cells of D. äspöensis DSM 10631T. The cells of D. äspöensis were successfully cultivated under anaerobic conditions as well in an optimized bicarbonate-buffered mineral medium as on solid medium at 22 °C. To study the interaction of D. äspöensis with the actinides, the cells were grown to the mid-exponential phase (four days). The collected biomass was usually 1.0±0.2 gdry weight/L. The purity of the used bacterial cultures was verified using microscopic techniques and by applying the Amplified Ribosomal DNA Restriction Enzyme Analysis (ARDREA). The interaction experiments with the actinides showed that the cells are able to remove all four actinides from the surrounding solution. The amount of removed actinide and the interaction mechanism varied among the different actinides. The main U(VI) removal occurred after the first 24 h. The contact time, pH and [U(VI)]initial influence the U removal efficiency. The presence of uranium caused a damaging of the cell membranes. TEM revealed an accumulation of U inside the bacterial cell. D. äspöensis are able to form U(IV). A complex interaction mechanism takes place consisting of biosorption, bioreduction and bioaccumulation. Neptunium interacts in a similar way. The experimental findings are indicating a stronger interaction with uranium compared to neptunium. The results obtained with 242Pu indicate the ability of the cells of D. äspöensis to accumulate and to reduce Pu(VI) from a solution containing Pu(VI) and Pu(IV)-polymers. In the case of curium at a much lower metal concentration of 3x10-7 M, a pure biosorption of Cm(III) on the cell envelope forming an inner-sphere surface complex most likely with organic phosphate groups was detected. To summarize, the strength of the interaction of D. äspöensis with the selected actinides at pH 5 and actinide concentrations ≥10 mg/L ([Cm] 0.07 mg/L) follows the pattern: Cm > U > Pu >> Np.

Ces travaux de thèse réalisés entre l'IRT Saint Exupéry et le CEMES, Université de Toulouse, CNRS ont pour objet l'étude d’alliages de la série 2000 pour des utilisations à des températures intermédiaires, de l'ordre de 200°C. La possibilité d'utiliser ces matériaux à cette température permettrait aux industriels du secteur aéronautique de réduire les coûts de production d'une part, et de diminuer les coûts d'exploitation des aéronefs ainsi plus légers d'autre part. Afin de répondre à cette problématique industrielle, deux nuances commerciales ont été considérées : le 2219-T851 et le 2050-T84. Ces nuances, déjà utilisées dans l'industrie aéronautique, ont été caractérisées à différentes échelles d'observation tout au long d'un vieillissement isotherme à 200°C allant jusqu’à 10000 h. Des observations effectuées à l'aide de divers microscopes optiques et électroniques et couplées à des essais mécaniques macroscopiques ont permis de déterminer l'évolution de ces nuances vieillies dans de telles conditions. Les résultats de cette étude montrent une importante stabilité thermodynamique des précipités nanométriques θ'-Al2Cu. Ces précipités constituent la microstructure fine de la nuance 2219-T851 à réception et apparaissent au cours du vieillissement au sein de la nuance 2050-T84 au détriment des précipités T1-Al2CuLi pourtant à l'origine des meilleures performances mécaniques avant vieillissement. Les évolutions microstructurales sont mises en lien avec les propriétés mécaniques en traction. Ces résultats montrent un intérêt industriel pour la nuance 2219-T851 dont la stabilité des propriétés a été montrée dès 1000h de vieillissement. / The main objective of this work which has been conducted between the IRT Saint Exupéry and the CEMES, Université de Toulouse, CNRS laboratory is to reduce production and exploitation costs of aircraft primary structures by evaluating the potential increase of operating temperatures of aluminum alloys. To do so, two already fit-to-fly Al-Cu alloys have been selected and studied: the 2219-T851 and the 2050-T84. These alloys have been characterized throughout ageing treatments up to 10,000h at 200°C with electronic and optical microscopies in order to evaluate the microstructural changes. Standardized mechanical tests have also been conducted to follow the effects of such ageing on the alloys’ properties. The results have shown the stability of the mechanical properties and the microstructure of the 2219-T851 from 1,000h to 10,000h of ageing. This is attributed to the nano-precipitation of θ'-Al2 Cu, stable during the ageing treatment. Moreover, those precipitates tend to form during the ageing of the 2050-T84 by replacing the well known T1-Al2CuLi phase, unstable during medium range temperature ageing. During this thesis, special attention has been paid on the link between the mechanical properties and the fine scale microstructures of both alloys.

The focus of this study was analytical investigations of Egyptian paintings, mainly Coptic icons and Islamic wooden ceilings, dating from 1300-1900 using multiinstrumental techniques. Twenty three Coptic icons and three wooden ceilings dated from different periods and painted by different painters in case of icons were examined. The materials used including pigments, media, varnishes, ground layers and gold layers. The surface stratigraphy of paint samples, their layered structured and the composition of materials used in each layer were analysed. Variations in painting techniques, pigments palettes, paint media and varnishes applied in Egyptian paintings according to painters, time and type of paintings were revealed. A total of twenty-eight organic and inorganic pigments were identified in this study, of which nine have never been previously included as a part of the Egyptian pigment palettes, namely; smalt, lapis lazuli, indigo, pararealgar, Prussian blue, chrome yellow, barium yellow, barium white and hydromagnesite. The identification of hydromagnesite, which has never been to date considered as a pigment either in Egypt or elsewhere and the identification of smalt from the mid-14th century, whose reported earliest large scale use was in the 16th century. Two types of resins were identified as a constituent of the oil/resin varnish applied on Coptic icons of which Venice turpentine has been identified for the first time as an ingredient of Egyptian varnishes. The identification of mosaic gold in an 18th C. icon, a novel usage of dammar resin and the multilayered structure of the white ground layers were revealed. / Egyptian Ministry of Higher Educations