Thesis (PhD (Electrical Engineering))--Cape Peninsula University of Technology, 2018. / The generation of electricity through the conventional conversion system such as thermal and hydroelectric plants may no longer be sufficient to meet the increasing demands and usage. One of the major reasons for shortage supply of electric power is due to the lack of fossil fuel and other conventional resources that are currently being used in Africa. In addition, the conversion process of the conventional system often causes pollution which contributes to global warming. Therefore, there is a need for this research to develop novel and alternative methods of generating electric power. Among these methods is the Magnetohydrodynamics (MHD) conversion system, which is a direct energy conversion system. In this system, plasma or ionised gas is directly converted into electric power with generating efficiency of about 62 %. The conversion process of the MHD system is based on the principle of Faraday’s Law of electromagnetism and fluid dynamics. The focus of the present study is to investigate alternative methods through which an MHD power generator can be coupled to the existing thermal plants in South Africa. In doing so, the thermal cycle efficiency of these conventional plants can be improved. Another goal of this study is to investigate the behaviour of an MHD generator prototype under exposure to plasma through simulation and experimentation in a laboratory setting.

The concept of using Magnetohydrodynamics to provide thrust has been around for decades. However little work has been carried out in one of the fundamental aspects that allows for these systems to operate in seawater. Therefore a series of tests were carried out to determine how the electrochemical reactions occurring at the electrodes affect the seawater system. These tests were used to determine the effects magnetic fields have on seawater conductivity, the pH changes around the electrodes, and consider the double layer capacitance model as a means to decrease the amount of gas bubbles created at the electrodes. As a result significant increases in resistivity in seawater were observed when the magnetic field was introduced, pH changes were seen on both the cathode and anode, and pulsing of the applied potential may stimulate further work to be considered. / by Juan E. Moreno. / Thesis (M.S.C.S.)--Florida Atlantic University, 2011. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2011. Mode of access: World Wide Web.

Dissertation submitted for Masters of Science degree in Mathematical Statistics in the Faculty of Science, School of Statistics and Actuarial Science, University of the Witwatersrand Johannesburg May 2016 / Electricity demand in South Africa exhibit some randomness and has some important implications on scheduling of generating capacity and maintenance plans. This work focuses on the development of a short term probabilistic forecasting model for the 19:00 hours daily demand. The model incorporates deterministic influences such as; temperature effects, maximum electricity demand, dummy variables which include the holiday effects, weekly and monthly seasonal effects. A benchmark model is developed and an out-of-sample comparison between the two models is undertaken. The study further assesses the residual demand analysis for risk uncertainty. This information is important to system operators and utility companies to determine the number of critical peak days as well as scheduling load flow analysis and dispatching of electricity in South Africa. Keywords: Semi-parametric additive model, generalized Pareto distribution, extreme value mixture modelling, non stationary time series, electricity demand

Orientador: Antonio Roberto Balbo / Coorientadora: Célia Aparecida dos Reis / Banca: Hassan Costa Arbex / Banca: Tatiana Miguel Rodrigues de Souza / Resumo: Atualmente a produção e o consumo de energia têm suma importância para a realização de diversas atividades humanas, o que implica em uma grande quantidade a ser produzida para atender a demanda, que, com o passar do tempo, aumenta cada vez mais. Esse aumento do consumo faz com que pesquisas sejam desenvolvidas com relação a sistemas de captação ou colheita de energia, que são chamados de "energy harvesting". Estas possibilitam sua conversão em energia elétrica, que pode ser diretamente utilizada ou armazenada para uso posterior. Um sistema de colheita de energia captada através de material piezoelétrico é aquele que colhe a energia gerada por vibração mecânica. Neste trabalho fez-se um estudo, em termos do plano de fase e estabilidade assintótica, de um modelo de vibração massa-mola-amortecedor associada a sistemas de colheita de energia, o qual é baseado em uma equação de Duffing. O modelo é formulado através de um sistema de equações diferenciais ordinárias não lineares e, para análise de suas soluções de equilíbrio, foi utilizado o método de Cardano - Tartaglia. Testes com um problema real são realizados apresentando as soluções obtidas pelo método, bem como uma simulação numérica do retrato de fase de dois pontos críticos destes, utilizando o software MatLab. / Abstract: Currently the production and consumption of energy is very important for the performance of various human activities, which entails a great demand to be met and, with the passage of time, increases more and more. This increase in energy consumption makes researches are developed in relation to energy harvesting systems called energy harvesting. These enable their conversion into electrical energy, which can be directly used or stored for later use. A system of energy harvesting captured by piezoelectric material is one that harvests the energy generated by mechanical vibration. In this work is investigated a mass-spring-damper vibration model associated with an energy harvesting system, which is based in a Duffing's equation. This model is formulated through a system of ordinary nonlinear differential equations and, to analyze of their equilibrium solutions, the Cardano - Tartaglia's method was used. Tests with an actual problem are done, presenting the solutions obtained by the method, as well as a numerical simulation a phase portrait analysis of two critical points of this, using the MatLab software. / Mestre

PhD / This study investigates how actions – especially narratives and claims – of civil society advocates influenced electricity generation planning and hydropower project implementation, in the context of a democratising authoritarian state. To pursue this research agenda, I use a critical realist philosophy of science to ground a conceptual framework whose fundamental components consist of institutions, interests, and discourses. The research presents three case studies from Thailand, a nation-state with distinct authoritarian legacies, as well as significant economic and political dynamism in the late 20th century. The cases step from macro to micro levels of analysis: (1) Electricity generation planning: an overview and critique of the social construction of peak power demand and supply options in Thailand, 1960s–2004. I focus on the rise of energy conservation advocacy in the early 1990s, and the rise of more confrontational energy activism in the late 1990s; (2) Pak Mun Dam: contention between EGAT, anti-dam villagers, and other state and civil society actors, 1989–2003; (3) Pak Mun Dam: analysis of how knowledge discourses shaped debates over fisheries and local livelihoods in the lower Mun river basin, 1999–2004. I pursue these cases in the larger context of Thai state–society relations, 1932–early 2000s: from the Khana Ratsadorn (People’s Party) and its founders’ increasingly authoritarian struggles to shape the state; through to the rise of civil society in the Indochina-war era; through the emergence of parliamentary politics and NGO evolution in the 1980s and early 1990s; to the Thai Rak Thai “money politics” party that emerged in 1998. Specific research questions focus on patterns and outcomes of state–society interaction, the role of lay and expert knowledge discourses in structuring conflict, and plausible causal connections between outcomes and concepts used in the conceptual framework. The study is based on fieldwork conducted between 2001 and 2005, with 18 months of intensive work concentrated in 2002 and 2004. Recurrent procedures consisted of collecting policy narratives and arguments and re-constructing actors’ interests (including those of leaders in organizations) via participant observation, interviews, and textual analysis. The thesis argues that anti-dam advocates influenced project implementation practices at Pak Mun Dam by forming social change networks, gaining contingent recognition as new political actors. Through innovative and disruptive action, through claims for transparency and justice, through mass performances of worthiness, unity, and commitment, and through the production of local knowledge, they helped set agendas. They triggered elite intervention, as well as reactive counter-mobilization and occasional violence. The escalation of uncertainty from unintended outcomes challenged elites – aided by deliberative exchanges – to reconsider unfavourable decisions, to reconsider their preferences, and to make concessions. At the same time, a number of events made the Assembly of the Poor, the main anti-dam movement organization, vulnerable to destabilizing action at the local and national levels. These include: the formation of competitive organizations in the lower Mun basin; complex and intractable issues (such as multiple rounds of compensation); and inability to take credit for championing the interests of vulnerable small farmers. Destabilizing interactions occurred particularly in the restricted media space of the post-financial and economic crisis years. Populist platforms put forward by Thai Rak Thai and Prime Minister Thaksin Shinawatra pre-empted the AOP’s influence. Sustainable energy advocates influenced practices of power system planning by teaching new techniques of energy conservation, and diffusing new norms. In the recent period, however, as some of them engaged in more contentious interaction, such as intervening in conflicts over new coal and hydroelectric power plants (in southern Thailand and Laos respectively) they disrupted dominant rationalities, and found themselves confronting some of the same core practices of a power-wielding bureaucracy and an authoritarian state, namely rhetorical strategies that police the boundaries of policy-relevant knowledge. The thesis, intended to contribute to social science methodology and theory, concludes with a critical appraisal of the conceptual framework. I suggest new research agendas for analysts interested in mechanisms of civil society advocacy in the context of democratising states.

If the observations of unregulated and recently deregulated essential services were to hold for electricity reform, we could expect to see market segmentation of household customers. This is a corporate strategy aimed at the acquisition of attractive customers and the avoidance of unattractive customers. It is a function of market relations and commodification. Some markets already segment and assign unattractive customers to 'residual' markets, 'sub-prime' markets or 'markets of last resort'. Residual markets tend to involve market abuse by suppliers because these customers lack market power. It is possible therefore to suggest that segmented markets are characterised by simultaneous competition and monopoly. The implications for the supply of essential services, such as electricity, are profound. This research sought to identify whether there is evidence of emerging segmentation of the domestic electricity market in Victoria. In practice, few essential services areas are completely deregulated. The history of segmentation in the US insurance and lending industries provides valuable insights into markets, market failure and social protections. Taking this history and the more recent experiences of reforms in the US, the UK and Australia, it has been possible to identify three models of social protection: 'universal service', a 'civil rights' model, and a 'market' model. The Victorian reforms reflect some elements of each of these. The social protections included in the reform package both encourage and present barriers to market segmentation. At the time of the research, some elements of the safety net arrangements and customer inertia (born out of negative attitudes to competition) have acted to inhibit segmentation. Customer inertia in its own right poses questions for the efficacy of competition policy. The key understanding that is gained from this research is that both civil rights and socioeconomic entitlements (social rights) are required to prevent markets in essential services acting upon and exacerbating inequality. This suggests that universal service, as a model of social protection, is most likely to ameliorate the impacts of inequality.

Thesis (M.E.)--University of Canterbury, 2009. / Typescript (photocopy). Includes bibliographical references (leaves 106-109). Also available via the World Wide Web.

Thesis (Ph. D.)--University of Texas at Austin, 2001. / Vita. Includes bibliographical references. Available also from UMI/Dissertation Abstracts International.

This dissertation analyses the reliability of power transformers and its impact of failure on system performance. Eskom Distribution, Eastern Region is used as a practical case study, which has an installed transformer base of 6066MVA comprising of 428 transformers ranging from 1 MVA to 8OMVA with voltage levels of 6.6kV to I 32kV. The literature review illustrates the theory and principles of transformers, evolution and changes in design criteria, the function of cellulose and insulating oil, failure modes. operations and maintenance practices and factors affecting the distribution systems performance. This study included a conditional assessment and an oil analysis review of transformers at Eskom. A method to trend multiple oil samples was developed and illustrated. The research further investigates the reliability of series and parallel systems using actual component reliability values. A study was conducted to establish the degree of network firmness. Transformer failure data was analysed and were shown to be characteristic of a bathtub curve. Defects from on site inspections were analysed and identified oil leaks as a maintenance focus area. The Distribution Supply Loss Index was determined to be the major impact Key Performance Index due to transformer failures. Transformer failures using statistical methods, showed HV/LV winding to be the main component to fail. The cost of a transformer failure to Eskom and the customer was determined. International Benchmarking was investigated to establish the criteria for network reliability indices and to compare the network infrastructure and performance of international utilities and Eskom. The later part of the study involved the analysis of a risk ranking methodology to establish a risk ranking matrix. The transformers were ranked according to the matrix, identifying the high risk focus areas. Projects were raised within Eskom to replace the identified high risk transformers. This study has concluded that the reliability of transformers is impacted by the changes in transformer design, increased maintenance defects and inadequate transformer protection at substations. The reduced oil volume per kVA, increased hot spot and ambient temperature, and compact tank designs have resulted in the cellulose being overheated and fault gases being produced during normal operating conditions. The increase in load demand from the existing transformer fleet and a reduction in capital expenditure to maintain and build additional substations have also contributed to accelerated aging, since the transformers are forced to operate at 100 percent loading. There is an increase in transformer maintenance defects due to in sufficient operational staff, high staff turnover, reduced skills transfer. and insufficient network contingencies to allow for planned outages to clear the defects identified. The failure analysis showed that the main component to fail is HV/LV windings. The winding failures were traced to there being no or inadequate transformer protection at -20% of substations. / Thesis (M.Sc.)-University of KwaZulu-Natal, 2007.

Public lighting is seen as a non-core function by many municipalities and therefore does not always receive the necessary management attention. As a result the provision of public lighting maintenance differs substantially between Local Authorities; in some instances public lighting is in a state of disrepair and in other instances the service delivery is excellent. One of the major problems identified is the lack of information with regard to the number and types of fittings installed and also the number of failures that occur. As a consequence many municipalities cannot provide accurate costs to enable comparison with other Local Authorities. There is also a general lack of consensus as to what constitutes appropriate service delivery in terms of system availability and failure response times. This results in large differences in terms of costs, which range from R11.50 to R26.60 per fitting per month and system availability, which ranges from less than 70% to better than 99%. To establish appropriate service levels responses were obtained from the general public and two groups more directly involved with streetlight maintenance namely, public officials and street lighting experts. This data together with the evaluation of historical data collected over the last 16 months on the Benoni network allows the formulation of appropriate cycle times in order to achieve the expected service delivery in terms of system availability and response times. A holistic literature survey is presented covering the major aspects which impact on service delivery such as the restructuring of the electricity distribution industry and local authority transformation. The aspects of energy efficiency and equipment life expectancy are covered in detail and recommendations are made as to the appropriate replacement cycles. The different lamp replacement policies are also discussed and cost comparisons made. Recommendations made are that a system availability of 98% is both acceptable and achievable with a moderate budget. Response times of less than 24 hours would be ideal but this does not optimise the utilisation of resources, budget constraints may dictate a longer response time. Response times of more than 5 days would generally be unacceptable. Optimal fitting replacement age is between 19 and 23 years. Under normal circumstances the introduction of energy efficient luminaires is the most cost effective when inefficient fittings have reached their optimal replacement age. Changes in energy costs, tax concessions or cost subsidisation will however impact on the appropriate replacement strategy. / Thesis (MBA)-University of KwaZulu-Natal, 2004.