This master thesis focuses on literature research of problematics linked to power actuators working on electromagnetic principle to accelerate metal projectiles. It’s goal is mathematical analysis and constuction of selected type of electromagntic power actuator – induction coilgun

This thesis deals with the basic theory of the electromagnetic field in the first part and the field interactions with biological tissues. Than describes shortwave diathermy as a technique used for purposes of medical treatment. The aim is to built a model of tissue heating in shortwave diathermy in COMSOL Multiphysics environment, so there is included a description of the programming environment, including the mathematical method that COMSOL uses for calculations. The output of the whole work is a model of the lower limb in the knee part and display the results after his diathermy heating.

Master thesis examines a selected part of electromagnetic compatibility. In this work, there is theoretically discussed how electromagnetic interference appears and how is spread through free space environment. To eliminate ambient interference signals, the measurements have been performed in anechoic chamber where the undesirable interference signals were suppressed. In the thesis, there are also described parameters of EMI receivers and limits of electromagnetic interference. The description of calculations of the antenna height for finding maximum intensity of electric field strength for standard measurement distance has been made. For proposed transformed measurement distance, calculations of intensity electric field with addition of parameters measuring antenna and object under test were performed. Correction curves for conversion intensity electric field have been obtained as the result.

This thesis deals with the idea of energy harvesting from mechanical vibration. It describes the magnetostrictive principle as a possibility to obtain an electrical energy. It is about a generator made of a beam with Terfenol-D material and a coil. The model of this device is created in Matlab/Simulink and FEMM application. For various values of measured vibration, these methods are then compared. In FEMM, you can improve energy gain by modeling of various environmental conditions and with using of another materials (e.g. by adding of permanent magnets). The outcome of the this thesis expresses the ability to harvest the energy with designed magnetostrictive generator compared to the already created models of the piezoelectric and electromagnetic generator. Based on these results, it is possible to determine which generator is more suitable for particular application.

The thesis deals with linearly polarized dielectric rectangular resonator antenna (DRA) operating in the basic mode TEy11 and higher order mode TEy131 at f0 = 10GHz surrounded by an electromagnetic band gap structure (EBG). The dielectric resonator antennas, the EBG structure were designed and a method of integration of both components was developed. The simulated results show a significant improvement of the radiation pattern in the E-plane radiation pattern (narrower main beam, lower level of side lobes, higher directivity) in comparison to a conventional DRA. This was verified by the TEy11 measurement.

This experimental diploma thesis investigates the changes in the metrological characteristics of the electromagnetic current meter of velocity. The theoretical part of the thesis includes a brief summary of technical and metrological characteristics of these types of devices. In addition, it describes the tested device, the test track, and the measurement procedure, which consists of two variants: long-term monitoring with a relatively regular monthly measurement interval and short-term monitoring with a regular daily measurement interval. The evaluation of the experimental work focuses on the repeatability and variability of the displayed point speed values and their stability over time. Furthermore, the parameters reported by the meter during long-term and short-term monitoring are compared to each other. The results are also compared with similar experiments.

The diploma thesis deals with the design of a system for measuring infrared spectra from local areas of samples. The theoretical part describes the electromagnetic waves and related phenomena. Furthermore, the semiconductor junction and solar cells are discussed. The following is a basic description of line spectrometers. In the practical part, a suitable arrangement of the whole system, collimator design, and especially the core of the whole work, ie control software and signal processing, are proposed.

The project compares and describes the characteristics of optical and electromagnetic methods, used for measuring the object’s velocity. Some of these are used at the ballistic laboratory of PROTOTYPA, a.s. company. The rest is mentioned in order to increase the range of the project and are not engaged by the company. The practical part involves measuring and processing the magnetic fields of various appliances. There is a method and appliance designed to process the link between flying object and sensor.

This diploma thesis deals with electromagnetic radiation in its frequency spectrum. It also divides radiation into ionizing and non-ionizing. The principle of its effects and possible health problems from radiation exposure are also described. Hygienic limits – the maximum allowable and reference values of non-ionizing radiation are analysed too. The thesis should prove that the things of everyday need do not threaten the lives of human beings and are in compliance with the regulation No. 1/2008 Sb. on Health Protection Against Non-Ionizing Radiation. Measurement of low-frequency part is carried out with the cooperation of The National Institute of Public Health. Measurement of high-frequency part was carried out in 3 flats. The aim of this measurement was to find out the change of power density with the moving in a flat and the influence of the barriers (in this case walls).

This master’s thesis is specialized on the influence of correct parameters of emissivity, which depends on the temperature, wavelength and ambient environment. The investigation the parameter was taken infrared non-contact thermometer MI3 from company Raytek. To improve the quality of measurement was designed and programmed measuring utility program. The program was developed in the LabView 8.5 programming environment. To obtain the true value of the measured temperature of the target was designed and constructed the touch thermometer with the resistance dependent sensor. The thermometer is connected to the communication box of infrared thermometer and contain the same program. Nowadays are the most advanced IR thermometer with fixed parameters emissivity, which is applicable just to the real body in the vicinity of the parameter emissivity 0,95. For those IR thermometers were designed correction function, which would have temperature measured at a fixed emissivity parameter 0,95 set close to the actual value of the object.