This master´s thesis deals with organic materials for use in electronics and photonics. Attention was paid to low molecular weight materials. The theoretical part of this thesis contains brief introduction to organic electronics and photonics. In particular, organic transistors, organic solar cells and organic light-emitting diodes are mentioned. The experimental part is focused on study of electrical and optical properties of two types of phthalocyanines. Thin films and solutions of phthalocyanines were characterized by UV-VIS spectroscopy. Thin films were also characterized by current voltage characteristics, spectral response measurement of photocurrent and by method of transient photoconductivity. It was found that illumination affects the electrical properties of thin layers of phthalocyanines, the performance of the prepared thin films depends on the type phthalocyanine and also depends on the thickness of the layer.

This diploma thesis is focused on the properties characterization of new organic materials with respect to their potential application in organic electro-optic devices. The theoretical part contains a themed literature search on application of organic materials for organic electronics and photonics. The basic principles of these devices are described. The practical part includes the preparation of thin films for organic photovoltaics of two types: based on low molecular weight organic compounds (diketo-pyrrolo-pyrroles derivates) and based on polymer (mixture of copolymer of poly(phenylenevinylene) and molecular senzitizer – derivate of fullerene). The first part of experiment is focused on characterization of optical and electrical properties of selected diketo-pyrrolo-pyrroles derivates and the second part is study the influence of annealing to polymer layer.

<p>U okviru disertacije predstavljene su metode realizacije kontekstualnih platformi i kontekstualnih korisničkih sprega za uređaje potrošačke elektronike. Predloženi su algoritmi semantizacije konteksta i procene zauzetosti korisnika, arhitektura rešenja i rezultati evaluacije.</p><p>&nbsp;</p> / <p>In this dissertation methods of implementation of context-aware platforms and context-aware user interfaces for applications in consumer electronics are presented. The work includes the proposition of algorithms for context semantization and user availability estimation, architecture of the solution as well as the results of evaluation experiments.</p>

Darbe atlikta teorinė žemesniųjų lavinamųjų klasių mokinių psichosocialinės raidos, veiklos ypatumų, veiklos priemonių – žaislų bei elektronikos ugdymo svarbos ir turinio parinkimo ypatumų analizė. Iškelta hipotezė, kad mokinių gebėjimas saugiai eksploatuoti jų aplinkoje sutinkamus elektroninius prietaisus bei prietaisus su elektronikos elementais sudaro optimalias prielaidas vaikų psichosocialinei raidai, o dažniausiai vaikų aplinkoje sutinkami elektroniniai daiktai yra žaislai bei buitiniai prietaisai. Anketinės apklausos metodu buvo atliktas tyrimas, kurio tikslas - ištirti ko ir kaip pedagogai moko ketvirtų lavinamųjų klasių mokinius ugdydami jų elektronikos pradmenų gebėjimus. Parengtos darbų programos plėtotei rekomendacinės elektronikos pradmenų ugdymo temos, pravestas eksperimentinis mokymas, įvertinti mokinių gebėjimai tinkamai eksploatuoti elektronikos prietaisus iki eksperimentinio mokymo ir po jo. Tyrime dalyvavo 30 specialiosios mokyklos žemesniųjų lavinamųjų klasių mokinių technologijų mokytojų ir 50 ketvirtų lavinamųjų klasių mokinių. Empirinėje dalyje nagrinėjamas mokytojų suvokimas apie lavinamųjų klasių mokinių gebėjimą tinkamai eksploatuoti elektronikos prietaisus, nustatomi trys mokinių gebėjimų lygiai: gebančių naudoti elektronikos prietaisus savarankiškai, gebančių naudoti su pagalba ir negebančių naudoti. Nustatomi gebėjimų skirtumai tarp berniukų ir mergaičių. Svarbiausios empirinio tyrimo išvados: 1. Pedagogai nurodo ugdantys mokinių... [toliau žr. visą tekstą] / Analysis of scientific literature reveals that scientists actively discuss issues, regarding what electronic means and devices should children be familiar with, teach how to use them, so that there would be optimal possibilities for their adaptation in society. This motivates to change task program for schoolchildren with extensive and extremely extensive educational needs of fourth grade by including topics, regarding formation of this skills in this field. It is possible to hypothesize that ability to safely behave with electronic toys and house appliances could increase children motivation to play social roles’ games and the suggested topics for development of a program, regarding involvement of basics of electronics into the program, will not only meet children needs, wishes and interests, but will also allow for adequate communication with social environment. Research participants constituted of 30 crafts teachers of lower training grades in special schools and 50 schoolchildren with extensive and extremely extensive educational needs in specials schools. Most significant conclusions from empirical research are: ● Data from teachers’ questionnaire reveal that all of them follow the task program prepared by Kaukenaite for children with extensive and extremely extensive educational needs and two thirds of respondents indicate that they introduce these students to electronic devices and methods, even though these topics are not included into the program. ● Research on... [to full text]

This master thesis is about design and construction of FDM delta 3D printer which consists of 32-bit electronics, magnetics printer head and other necessary peripheries. Opening chapters of this thesis are about theory of 3D printing and its methods with description of FDM 3D printers and summarization of FDM plastic materials used for 3D printing. The next part is about used electronics and problematic of heat transfer. The main part of this thesis describes design and construction of 3D printer and its necessary peripheries, which includes creation of its 3D model and application for 32bit controller. 3D model of delta 3D printer and its heating components was created in CAD software SolidWorks. The last part includes description of commissioning and calibration of delta 3D printer with summarization of economic aspects of its creation.

This diploma thesis is studing the possibilities of influencing the optoelectric properties of printed light emitting panels, which work on the principle of electroluminescence excited by alternating electric field. The aim of this worrk is to monitor the influence od dielectric properties of electroluminescent phosphor binder on the targeted electroluminescence. In the theoretical part of this thesis, there are described principles of electroluminescence, suitable materials methods of characterization and preparation of panels using printing techniques. Experiment part contains electrical characterization of selected binders to determine their dielectric constants. Subsequently, printing pastes were formulated in different weight ratios of binder electroluminescent phosphor and model light-emitting panels were prepared. Optoelectric characterization was used to determine the change in irradiance. It was found that the dielectric properties of the binder significantly affect the resulting irradinace. It has same irradiance for a smaller amount od phosphor than with the binder with a low dielectric constant. The finding of this work can be used to improve the luminosity at the electroluminescent panels.

Organické elektronické zariadenia sú vyvíjané ako vhodné riešenia senzorov pre bioelektroniku, a to najmä kvôli dobrej biokompatibilite organických polovodičov v nich použitých. Takzvané biosenzory dokážu premeniť elektrochemické procesy na elektronický signál. Matrica takýchto biosenzorov môže simultánne skenovať množstvo biologických vzoriek, alebo rôznych tkanív v živých systémoch. Aktívnou súčasťou zariadenia je organický elektrochemický tranzistor (OECT). V tejto práci je diskutovaný teoretický rámec fungovania takéhoto zariadenia, jeho elektrická charakterizácia, aplikácia v biosenzoroch na báze buniek, spôsoby výroby a aktuálnym stavom techniky v oblasti organickej elektroniky. Experimentálna časť obsahuje konkrétne výrobné postupy vývoja OECT zariadení, ktoré boli použité v našom laboratóriu. Hlavný dôraz sa kladie na schopnosť vyrobených zariadení detekovať reakciu a monitorovať stimuláciu elektrogenných buniek. Za týmto účelom boli vyvinuté matice mikroelektródových OECT zariadení založených na polovodivom polyméri PEDOT:PSS. Tieto boli vyrobené s využitím bežnými tlačiarenských techník (atramentová tlač a sieťotlač) spolu so štandardnými litografickými postupmi. Najnovšie nami vyvinuté zariadenia dosahujú najväčšieho zosílením signálu, g = 2,5 mS a časovú konštantu t = 0,15 s. Tieto zariadenia sú porovnateľné, často dokonca lepšie ako niektoré iné najmodernejšie a plne litograficky pripravené senzory.

This thesis covers the development of complex HIL simulator for the fifth car door. The beginning of the thesis is dedicated to theoretical research in the area of In-the-Loop testing. Practical part describes development of HIL simulator complemented by power electronics part. A simulation environment Matlab/Simulink was used for control design and analysis. Before the beginning of the work was measured signal part of control unit and specific signal sequences were identified. The control was applied on sbRIO device from National Instruments company with the implementation of a model on FPGA. Specific requirements for sensing speed and generation of communication signals lead to creation of unique hardware for application needs. The result of the thesis is complex HIL simulator with intuitive GUI and possibility of simulations a wide range of DC motors.

Před necelými dvaceti lety byl představen nekonvenční přístup k implementaci multifunkčních obvodů, tzv. polymorfní elektronika. Polymorfní elektronika umožňuje implementovat jedním obvodem dvě nebo více funkcí, přičemž aktuálně funkce závisí na stavu okolního prostředí obvodu. Klíčovými komponentami takových obvodů jsou polymorfní hradla. Od představení konceptu polymorfní elektroniky bylo publikováno několik desítek polymorfních hradel. Parametry většiny z nich však neumožňují jejich využití v reálných aplikacích. Bez dostatečného množství polymorfních hradel s dobrými parametry však nejspíše zůstane v aplikacích založených na multifunkčním chování nebo rekonfiguraci konvenční elektronika preferována před tou polymorfní. Tato disertační práce představuje nový přístup k polymorfní elektronice. Je založen na hradlech, jejichž funkce závisí na polaritě napájecích přívodů. Cílem této disertační práce je ukázat, že takový přístup umožňuje navrhnout hradla s výrazně lepšími parametry. Aby bylo možné systematicky navrhovat na úrovni tranzistorů takováto hradla, byla navržena evoluční metoda založená na kartézském genetickém programování (CGP). To umožnilo navrhnout několik sad efektivních polymorfních hradel založených jak na konvenčních MOSFET tranzistorech, tak na double-gate ambipolárních tranzistorech. Z těchto sad hradel byla vytvořena knihovna, která je v současné době volně dostupná pro ostatní vědce. Dále byla v této práci navržena řada složitějších obvodů založená na navržených hradlech. Na různých úrovních návrhu obvodů (hradla, RTL, cílová aplikace) je pak ukázáno, že navrhovaný polymorfismus na úrovni hradel představuje velké výhody v porovnání s předchozí generací polymorfních hradel, ale může být také konkurenceschopný nebo výrazně lepší než konvenční řešení takovýchto obvodů.

The goal of this thesis was to design an end effector for a small robot for testing of devices with a touchscreen. The effector has to communicate with the robot via serial interface and provide feedback about used downforce. Another requirement was possibility of automatic tool change. Measuring of downforce, signal processing, and communication with robot ensures custom electronics based on STM32 microprocessor and piezoresistive sensor. The mechanism of tool change was inspired by the system used with industrial robots but customized for this application. The result of this thesis is a functional prototype of a stylus for devices with a touchscreen which provides feedback about the downforce on display and possibility of automatic tool change. The main benefit of this solution is the possibility of changing the tool for the one with one or more styluses for testing gesture-based interface what is indispensable in these days.