41 |
Dálkové softwarové ovládání platformy bezdrátového modulu mobilního robotu / Remote control of remote communication board of mobile robotJílek, Tomáš January 2011 (has links)
The thesis discusses the possible ways of remote management of devices running Mikrotik RouterOS and choosing appropriate variant for implementation of automated remote management of the device, which is part of a mobile robot. Due to the limited capabilities of embedded system, from which it is necessary to perform automated remote management of device with this operating system, it was not possible to use standardized protocols for this purpose. A substantial part of this work therefore deals with analysis and detailed documentation of proprietary protocols implemented in the MikroTik RouterOS operating system, which are suitable for implementation in an embedded system, from which it is necessary to perform automated remote management. The conclusion describes the principle of the proposed and realized implementation of proprietary protocols in C language. The described implementation is part of the library, which provides automated remote management using these protocols.
|
42 |
Development of Classroom Tools for a RISC-V Embedded SystemPhillips, Lucas 01 May 2022 (has links)
RISC-V is an open-source instruction set that has been gaining popularity in recent years, and, with support from large chip manufacturers like Intel and the benefits of its open-source nature, RISC-V devices are likely to continue gaining momentum. Many courses in a computer science program involve development on an embedded device. Usually, this device is of the ARM architecture, like a Raspberry Pi. With the increasing use of RISC-V, it may be beneficial to use a RISC-V embedded device in one of these classroom environments. This research intends to assist development on the SiFive HiFive1 RevB, which is a RISC-V embedded device. This device was chosen because of its ease of use, functionality-rich API, and affordability. In order to make developing with this board very approachable for a student, this research involved the development of a small suite of tools. These tools support common functionality like: building a source file into an executable ELF file, converting that ELF executable into an Intel HEX executable format that is required to run on the device, uploading the Intel HEX executable onto the device, and attaching a debug session to the program that is running on the device. With the help of this toolchain, developing on this RISC-V embedded device should be very approachable for most students.
|
43 |
Une approche intégrée pour la validation et la génération de systèmes critiques par raffinement incrémental de modèles architecturaux / An integrated approach to validate and generate high-integrity systems by incremental refinement of architectural modelsLasnier, Gilles 27 August 2012 (has links)
L’augmentation de la complexité des systèmes temps-réel répartis embarqués (TR2E) et leur implication dans de nombreux domaines de notre quotidien imposent de nouvelles mé thodes de réalisation. Dans les domaines dits critiques (transport, médecine...) ces systèmes doivent satisfaire des contraintes dures pour garantir leur bon fonctionnement et éviter toutes défaillances qui engendreraient des conséquences financières ou humaines dramatiques. L’Ingénierie Dirigée par les Modèles (IDM) introduit le “modèle” - i.e. une description abstraite du système - et un ensemble d’outils (édition, transformation...) permettant la simplification et l’automatisation des étapes de conception, de validation et de génération du système. Ainsi, différentes abstractions du système sont élaborées dans des formalismes spécifiques de manière à couvrir un aspect du système et à permettre la réutilisation des outils d’analyse et de génération existants. Cependant, ces multiples représentations évoluent à des niveaux d’abstractions différents et il n’est pas toujours évident de mettre en corrélation système analysé et système généré. Ce travail de thèse exploite les concepts et les mécanismes offerts par l’IDM pour améliorer la fiabilité du processus de réalisation des systèmes critiques basé sur les modèles. L’approche que nous avons définie repose sur la définition du langage de modélisation architecturale et comportementale AADL-HI Ravenscar - un sous-ensemble du langage AADL (Architecture Analysis & Design Language) et de son annexe comportementale - contraint pour permettre conjointement l’analyse et la génération de l’ensemble des composants de l’application y compris de son exécutif, avec une sémantique proche d’un langage de programmation impératif... / The increasing complexity of distributed realtime and embedded (DRE) systems and their implication in various domains imply new design and development methods. In safety- criticial domains such as space, aeronautical, transport or medicine, their failure could result in the failure of the mission, or in dramatic damages such as human losses. This particular class of systems comes with strong requirements to satisfy safety, reliability and security properties. The Model-driven Engineering (MDE) introduces the concept of «model» - an abstract description of the system and a set of tools (editor, transformation engine, code generator) to simplify and automatize the design, the validation and the implementation of the system. Thus, various abstractions are realized using different domain-specific modeling languages in order to assess one particular aspect of the system and to re-use model-based analysis tools and generative technologies. These various representations may share some commonalities but the consistency between them is hard to validate (for example : Is the analyzed system the same as the generated one ?).This PhD thesis leverages MDE concepts and mechanisms, to enhance the reliability of the model-based development process of DRE systems. Our approach is based on the definition of the architectural and behavioral modeling language AADLHI Ravenscar, a restriction of AADL (Architecture Analysis & Design Language) and its behavioral annex. This subset of AADL constructs, comes up with a semantic close to the one of an imperative programming language, to drive both the analysis and the code generation of the application components and its relying execution platform (middleware) components...
|
44 |
Exploration of Deep Learning Applications on an Autonomous Embedded Platform (Bluebox 2.0)Katare, Dewant 12 1900 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / An Autonomous vehicle depends on the combination of latest technology or the ADAS safety features such as Adaptive cruise control (ACC), Autonomous Emergency Braking (AEB), Automatic Parking, Blind Spot Monitor, Forward Collision Warning or Avoidance (FCW or FCA), Lane Departure Warning. The current trend follows incorporation of these technologies using the Artificial neural network or Deep neural network, as an imitation of the traditionally used algorithms. Recent research in the field of deep learning and development of competent processors for autonomous or self-driving car have shown amplitude of prospect, but there are many complexities for hardware deployment because of limited resources such as memory, computational power, and energy. Deployment of several mentioned ADAS safety feature using multiple sensors and individual processors, increases the integration complexity and also results in the distribution of the system, which is very pivotal for autonomous vehicles.
This thesis attempts to tackle two important adas safety feature: Forward collision Warning, and Object Detection using the machine learning and Deep Neural Networks and there deployment in the autonomous embedded platform.
1. A machine learning based approach for the forward collision warning system in an autonomous vehicle.
2. 3-D object detection using Lidar and Camera which is primarily based on Lidar Point Clouds.
The proposed forward collision warning model is based on the forward facing automotive radar providing the sensed input values such as acceleration, velocity and separation distance to a classifier algorithm which on the basis of supervised learning model, alerts the driver of possible collision. Decision Tress, Linear Regression, Support Vector Machine, Stochastic Gradient Descent, and a Fully Connected Neural Network is used for the prediction purpose.
The second proposed methods uses object detection architecture, which combines the 2D object detectors and a contemporary 3D deep learning techniques. For this approach, the 2D object detectors is used first, which proposes a 2D bounding box on the images or video frames. Additionally a 3D object detection technique is used where the point clouds are instance segmented and based on raw point clouds density a 3D bounding box is predicted across the previously segmented objects.
|
45 |
Správa UPS zdrojů s využitím technologie GSM / Management of UPS Supplies with GSM TechnologyHájek, Josef January 2009 (has links)
Theme of the Master's thesis is issue of backup power units and its attributes. There is also complete proposal of UPS power unit which can be used to control and monitor backup batteries. Power supply is fully controlled via Ethernet interface using TCI/IP protocol. The other chapter describes complete development of TCI/IP GSM unit which can be used for communication interface between GSM and Ethernet protocol. UPS and GSM modules are developed in details. The Master.s thesis includes all needed information for HW unit development and also for controlling software as well. Universal solution of the modules allows number possibilities of further development.
|
46 |
RTOS Tutorials for a Heterogeneous Class of Senior and Beginning Graduate StudentsSwegert, Eric B. 14 October 2013 (has links)
No description available.
|
47 |
Dog Smart Vest MicroprocessingBeitman, Bruce A. 19 June 2012 (has links)
No description available.
|
48 |
Avaliação dos requisitos para teste de um sistema operacional embarcado / Testing requirements for an embedded operating systemBeque, Luciéli Tolfo January 2009 (has links)
A sociedade está cada vez mais dependente de sistemas embarcados, sendo que na grande maioria das vezes eles operam de maneira invisível aos seus usuários. Essa dependência torna esses usuários vulneráveis a riscos, devido às falhas que podem ocorrer. Essas falhas podem provocar perdas de vidas ou sérios danos materiais e financeiros. Devido a estes fatos, a qualidade destes produtos torna-se um ponto essencial para se ter um sistema estável, livre de erros e com todas as suas funcionalidades sendo executadas. De encontro a isso, a etapa de teste apresenta-se como indispensável e de relevada importância para a obtenção de um produto com uma boa qualidade. Devido ao alto custo de produção e energia gasto com testes, surge a necessidade de novos estudos, sobre diversificados métodos, para se testar um sistema embarcado. Neste contexto, este trabalho tem como objetivo apresentar os estudos iniciais do teste de um Sistema Operacional Embarcado (SOE), através de um estudo de caso focado na rotina de tratamento de exceção do eCos (Embedded Configurable Operating System), pois ela apresenta uma forte interação entre software e hardware, sendo que esta interação é um dos principais desafios encontrados no teste de um software embarcado. Com isso, este trabalho pretende dar o passo inicial para pesquisas relacionadas aos testes de um Sistema Operacional Embarcado. Após a análise dos experimentos, pôde-se notar que a principal característica do Sistema Operacional Embarcado eCos, a configurabilidade, é um ponto de dificuldade extra para a realização dos testes, pois exige um estudo detalhado do código do SOE, o qual é totalmente genérico, antes do planejamento dos testes, podendo ser gasto muito tempo nessa atividade. Outro ponto é que o teste torna-se totalmente dependente do hardware. Entretanto, os resultados experimentais apresentados para o estudo de caso do presente trabalho foram satisfatórios. / Society is increasingly dependent on embedded systems, which in most cases operate in an invisible manner to its users. This dependence makes the user vulnerable to risks due to failures that may occur. These failures can cause loss of lives or serious property and financial damage. Because of these facts, the quality of these products becomes a key point to have a stable system, free of errors and with all the features running. This testing is of essential importance to obtain a product with good quality. Due to the high cost of production and energy spent on tests, there is a need for further studies on different methods, to test an embedded system. In this context, this work aims at presenting the initial studies as the testing of the Embedded Operating System. The case study was focused on the exception handling routine of the eCos (Embedded Configurable Operating System), because it has a strong interaction between software and hardware, and this interaction is one of the main challenges encountered in testing embedded software. Therefore, this work aims at taking the first steps towards research related to testing an Embedded Operating System. After analyzing the experiments, it was noted that the main feature of the Embedded Operating System, eCos, the configurability, is an extra point of difficulty for the tests. It requires a detailed study of the code eCos, which is completely general, before the planning of tests, and could be spent much time in this activity. Another point is that the test becomes totally dependent on hardware. However, the experimental results presented for the case study of this study showed satisfactory.
|
49 |
Avaliação dos requisitos para teste de um sistema operacional embarcado / Testing requirements for an embedded operating systemBeque, Luciéli Tolfo January 2009 (has links)
A sociedade está cada vez mais dependente de sistemas embarcados, sendo que na grande maioria das vezes eles operam de maneira invisível aos seus usuários. Essa dependência torna esses usuários vulneráveis a riscos, devido às falhas que podem ocorrer. Essas falhas podem provocar perdas de vidas ou sérios danos materiais e financeiros. Devido a estes fatos, a qualidade destes produtos torna-se um ponto essencial para se ter um sistema estável, livre de erros e com todas as suas funcionalidades sendo executadas. De encontro a isso, a etapa de teste apresenta-se como indispensável e de relevada importância para a obtenção de um produto com uma boa qualidade. Devido ao alto custo de produção e energia gasto com testes, surge a necessidade de novos estudos, sobre diversificados métodos, para se testar um sistema embarcado. Neste contexto, este trabalho tem como objetivo apresentar os estudos iniciais do teste de um Sistema Operacional Embarcado (SOE), através de um estudo de caso focado na rotina de tratamento de exceção do eCos (Embedded Configurable Operating System), pois ela apresenta uma forte interação entre software e hardware, sendo que esta interação é um dos principais desafios encontrados no teste de um software embarcado. Com isso, este trabalho pretende dar o passo inicial para pesquisas relacionadas aos testes de um Sistema Operacional Embarcado. Após a análise dos experimentos, pôde-se notar que a principal característica do Sistema Operacional Embarcado eCos, a configurabilidade, é um ponto de dificuldade extra para a realização dos testes, pois exige um estudo detalhado do código do SOE, o qual é totalmente genérico, antes do planejamento dos testes, podendo ser gasto muito tempo nessa atividade. Outro ponto é que o teste torna-se totalmente dependente do hardware. Entretanto, os resultados experimentais apresentados para o estudo de caso do presente trabalho foram satisfatórios. / Society is increasingly dependent on embedded systems, which in most cases operate in an invisible manner to its users. This dependence makes the user vulnerable to risks due to failures that may occur. These failures can cause loss of lives or serious property and financial damage. Because of these facts, the quality of these products becomes a key point to have a stable system, free of errors and with all the features running. This testing is of essential importance to obtain a product with good quality. Due to the high cost of production and energy spent on tests, there is a need for further studies on different methods, to test an embedded system. In this context, this work aims at presenting the initial studies as the testing of the Embedded Operating System. The case study was focused on the exception handling routine of the eCos (Embedded Configurable Operating System), because it has a strong interaction between software and hardware, and this interaction is one of the main challenges encountered in testing embedded software. Therefore, this work aims at taking the first steps towards research related to testing an Embedded Operating System. After analyzing the experiments, it was noted that the main feature of the Embedded Operating System, eCos, the configurability, is an extra point of difficulty for the tests. It requires a detailed study of the code eCos, which is completely general, before the planning of tests, and could be spent much time in this activity. Another point is that the test becomes totally dependent on hardware. However, the experimental results presented for the case study of this study showed satisfactory.
|
50 |
Avaliação dos requisitos para teste de um sistema operacional embarcado / Testing requirements for an embedded operating systemBeque, Luciéli Tolfo January 2009 (has links)
A sociedade está cada vez mais dependente de sistemas embarcados, sendo que na grande maioria das vezes eles operam de maneira invisível aos seus usuários. Essa dependência torna esses usuários vulneráveis a riscos, devido às falhas que podem ocorrer. Essas falhas podem provocar perdas de vidas ou sérios danos materiais e financeiros. Devido a estes fatos, a qualidade destes produtos torna-se um ponto essencial para se ter um sistema estável, livre de erros e com todas as suas funcionalidades sendo executadas. De encontro a isso, a etapa de teste apresenta-se como indispensável e de relevada importância para a obtenção de um produto com uma boa qualidade. Devido ao alto custo de produção e energia gasto com testes, surge a necessidade de novos estudos, sobre diversificados métodos, para se testar um sistema embarcado. Neste contexto, este trabalho tem como objetivo apresentar os estudos iniciais do teste de um Sistema Operacional Embarcado (SOE), através de um estudo de caso focado na rotina de tratamento de exceção do eCos (Embedded Configurable Operating System), pois ela apresenta uma forte interação entre software e hardware, sendo que esta interação é um dos principais desafios encontrados no teste de um software embarcado. Com isso, este trabalho pretende dar o passo inicial para pesquisas relacionadas aos testes de um Sistema Operacional Embarcado. Após a análise dos experimentos, pôde-se notar que a principal característica do Sistema Operacional Embarcado eCos, a configurabilidade, é um ponto de dificuldade extra para a realização dos testes, pois exige um estudo detalhado do código do SOE, o qual é totalmente genérico, antes do planejamento dos testes, podendo ser gasto muito tempo nessa atividade. Outro ponto é que o teste torna-se totalmente dependente do hardware. Entretanto, os resultados experimentais apresentados para o estudo de caso do presente trabalho foram satisfatórios. / Society is increasingly dependent on embedded systems, which in most cases operate in an invisible manner to its users. This dependence makes the user vulnerable to risks due to failures that may occur. These failures can cause loss of lives or serious property and financial damage. Because of these facts, the quality of these products becomes a key point to have a stable system, free of errors and with all the features running. This testing is of essential importance to obtain a product with good quality. Due to the high cost of production and energy spent on tests, there is a need for further studies on different methods, to test an embedded system. In this context, this work aims at presenting the initial studies as the testing of the Embedded Operating System. The case study was focused on the exception handling routine of the eCos (Embedded Configurable Operating System), because it has a strong interaction between software and hardware, and this interaction is one of the main challenges encountered in testing embedded software. Therefore, this work aims at taking the first steps towards research related to testing an Embedded Operating System. After analyzing the experiments, it was noted that the main feature of the Embedded Operating System, eCos, the configurability, is an extra point of difficulty for the tests. It requires a detailed study of the code eCos, which is completely general, before the planning of tests, and could be spent much time in this activity. Another point is that the test becomes totally dependent on hardware. However, the experimental results presented for the case study of this study showed satisfactory.
|
Page generated in 0.0422 seconds