Diploma thesis evaluates the influence of the thermal insulation of municipal buildings and expenses associated with the running of these properties. First is analyzed the issue of energy demands of buildings then the possibilities of reducing heat loss and possible material variants . Using the method of building insulation ETICS is analyzed in detail. Thermal insulation is designed in several versions for each building . The thesis includes thermal assessment of the original state of the building and subsequently heat- assessment after each variant insulation. The conclusion evaluates the payback period of each variant.

Through a myriad of practices, anthropogenic land and water use has caused the localized extirpation or complete elimination of many native fishes throughout North America. Specifically, native salmonids have seen substantial declines in population sizes and geographic distributions due to a number of factors, including habitat loss or degradation, overharvest, or the introduction of non-native competitors and predators. Among those affected, the 14 subspecies of cutthroat trout found across western North America have been subject to two extinctions and five listings as Threatened as per the Endangered Species Act. Lahontan cutthroat trout Oncorhynchus clarkii henshawi have experienced marked reductions throughout their native range in the western Great Basin, U.S. In Pyramid Lake, Nevada, where they were once locally extirpated due to overfishing, water loss, and degraded spawning habitat, Lahontan cutthroat trout have been successfully stocked and managed, though they do not routinely reach their pre-extirpation sizes. With little research to determine the factors influencing Lahontan cutthroat trout in Pyramid Lake, I used a suite of modeling tools and empirical data to elucidate the influence of the current surrounding environment on Lahontan cutthroat trout in Pyramid Lake. To identify important food web interactions that may affect the availability of food to Lahontan cutthroat trout, I used diet composition and stable isotope analyses of carbon and nitrogen to understand dietary trends. Large Lahontan cutthroat trout (>400 mm TL), along with non-native Sacramento perch Ambloplites interruptus, relied most heavily on fish prey, yet neither species showed signs of cannibalism or preying on the other species. Diet composition and stable isotope analyses also indicated that Lahontan cutthroat trout rely mostly on tui chub Gila bicolor and other fish for food. I also used results from bioenergetic and hydroacoustic analyses to compare the number of tui chub consumed by trout to the number of tui chub in the lake, during the time of this study. Results from these analyses suggest that trout consume well below the number of tui chub available in the lake, indicating that trout are not limited by the availability of tui chub. Lastly, I used a number of biotic and abiotic predictors to determine which factors influence the distribution, and subsequently abundance, of trout in Pyramid Lake and found that biotic factors were very weak predictors of trout distribution, further indicating that trout are not limited by food resources in Pyramid Lake.

Thesis (MScEng)--Stellenbosch University, 2012. / ENGLISH ABSTRACT: Energy efficiency and the move to renewable energy resources are of vital importance in growing profitable and sustainable economies. In recent years, greater emphasis has been placed on institutions, companies and individuals to reduce their electrical energy demand through energy management. In an attempt to reduce the demand, the electrical power utility in South Africa, Eskom, has introduced Demand Side Management programs and substantial increases in electricity tariffs. In addition to these, tax incentives have been offered to help off-set the capital costs associated with the investments made in replacing old electrical equipment with new electrically efficient equipment. Thus the need for accurate Measurement and Verification of electrical energy demand reduction, to substantiate fiscal claims, has become imperative. The main purpose of Measurement and Verification is to investigate the actual monetary performance of an energy savings project. Energy savings assessments, based on purely deterministic baseline demand, do not adequately represent the statistical nature of the savings impacts of many practical load systems, as disclosed in a reporting period. This thesis presents the development of a generic probabilistic methodology to determine the demand profiles of preand post-Energy Conservation Measures (ECMs) for practical load systems. The difference between the simulated demand of the pre- and post-ECMs for a particular set of variables represent the electrical demand impact. The electrical demand of the pre- and post-ECMs is defined in terms of Probability Density Functions, and derived using a multivariate kernel density estimation algorithm. The approach is tested using a simulation model of a waterheating geyser implemented in MATLAB. Three different ECMs are simulated using the geyser model and demand density estimation. The results of the demand impacts of the ECMs are presented and evaluated. With regards to possible future research this methodology could be applied to the evaluation of the demand impacts of heat pump technologies and solar water heaters. / AFRIKAANSE OPSOMMING: en die skuif na hernubare energiebronne is van deurslaggewende belang vir die ontwikkeling van winsgewende en volhoubare ekonomieë. Onlangs is meer klem geplaas op instansies, maatskappye en individue om hul aanvraag na energie te verminder met behulp van energiebestuur. In ‘n poging om die aanvraag te verlaag, het Eskom, Suid-Afrika se elektrisiteitsverskaffer, aansienlike elektrisiteitstariefverhogings ingelyf en Aanvraagbestuursprogramme van stapel gestuur. Bykomend hiertoe is belastingaansporings ook aangebied, waarteen kapitale kostes, geassosieer met die vervanging van ou elektriese toerusting met nuwe elektries doeltreffende toerusting, afgeset kan word. Derhalwe het die behoefte aan akkurate Meting en Verifikasie van elektriese energie aanvraagvermindering, om finansiële eise te staaf, noodsaaklik geword. Die hoofdoel van Meting en Verifikasie is om die werklike finansiële prestasie van energiebesparingsprojek te ondersoek soos bekend gemaak word tydens ’n verslagdoeningstydperk. Energiebesparingassesserings wat slegs gebaseer word op die suiwer deterministiese basislyn aanvraag na elektrisiteit, verteenwoordig nie die werklike statistiese aard van die besparingsimpakte van baie praktiese lasstelsels nie. Hierdie tesis stel die ontwikkeling van generiese waarskynlikheids-metodologie voor, om die voor- en na- Energiebesparings-maatreëls se aanvraagprofiele vir sulke praktiese lasstelsels, vas te stel. Die verskil tussen die gesimuleerde aanvraag van die voor- en na- Energiebesparings-maatreëls vir spesifieke stel veranderlikes verteenwoordig die elektriese aanvraag impak. Die voor- en na- Energiebesparings-maatreëls van die energieverbruik profieldata word gedefinieer in terme van Waarskynlikheidsdigtheidsfunksies en afgelei deur gebruik te maak van meerveranderlike kerndigtheidafskattingsalgoritme. Die benadering is getoets deur gebruik te maak van simuleringsmodel van warmwaterstelsel geïmplimenteer in MATLAB. Drie verskillende voor- en na- Energiebesparings-maatreëls is gesimuleer met behulp van die warmwaterstelselmodel en aanvraag digtheidafskatting. Die resultate van die elektriese aanvraag impakte van die voor- en na- Energiebesparings-maatreëls word vervolgens bespreek en geëvalueer. Met betrekking tot moontlike toekomstige navorsing kan hierdie metodologie toegepas word om die aanvraag impakte van hittepomp- en sonwaterverwarmingstegnologieë te evalueer.

The access to ideal heating and power techniques has always been highly thought after.This is mainly due to the development in housing architecture and the cold nature of certain regions which has led to an increase in popularity of the heating market and modernised heating technologies. The current DH systems make use of CHP plants for thegeneration of power and electricity. These CHP plants for the most part, are powered through biomass and during winter periods the demand for heating is highly increased.The biggest issue with relying on biomass solely is the constant need to burn wasteproducts which not only results in increasing the demand for consuming in more waste,but also results in producing remains (by-products) that cannot be broken down further and hence might require the utilization of land-space (landfills) for their disposal. Solar modules on the other hand, have gained increased popularity in the recent age. This is mainly due their extremely high flexible ability in converting solar irradiance intoelectrical and thermal energies. This study will try to provide a comprehensive study intothe utilization of a hybrid solar system that combines a standard PV module with a flat-plate collector through estimating the energy demands for a simple housing within Sweden and China. This will be the main aim of the study, however the possibilities of integrating this hybrid solar system alongside current DH systems will mostly be discussed in the first sections to proof the possibility of executing such a system. The theoretical work carried out will only include simulations of having just separate,standalone PV and flat-plate collector modules. However, designing a hybrid solar and DH system will not be the major focus of this study. The results at the end of the report,concluded that the electrical production for the Swedish case were noticeably higher thanthat of the Chinese case in spite of maintaining the same load values through both cases and higher solar irradiation for the Chinese case. Due to PVsyst simulation constraints,the results show that the investment cost of the Swedish PV (electrical component) module was about 3.6 times greater than that of the Chinese which could possibly mean that the Swedish case has a bigger PV module area than the Chinese case in order to meetel ectricity demand monthly. However, when it came to the thermal energy production, it was possible to assume different collectors cases and hence an area of 7m2 was chosen for the Swedish perspective while an area of 4m2 has been considered for the Chinese case. The thermal useful energy values where then compared with heating demands for both of the cases. Finally, the thesis concluded that there was no requirement for having an integrated DH network within the standalone houses, having small electricity and heat demand and hence, it might be more beneficial to have an integrated DH and solar system within more densely populated housing areas. / Efterfrågan på tillgången till idealisk uppvärmning och effektiva tekniker har alltid varithög. Detta beror främst på utvecklingen inom arkitektur och den kalla naturen i vissaregioner som har lett till en ökad popularitet av värmemarknaden och moderniseradevärmeteknologiert. De nuvarande fjärrvärme-systemen använder kraftvärmeverk förproduktion av kraft och elektricitet. Dessa kraftvärmeanläggningar drivs till stor delgenom biomassa och under vinterperioderna ökar efterfrågan på uppvärmning mycket.Det största problemet med att förlita sig på biomassa enbart är det ständiga behovet avatt bränna avfallsprodukter som inte bara resulterar i att öka efterfrågan på konsumtionav fler avfallsprodukter utan också resulterar i att producera rester (biprodukter) sominte kan brytas ned ytterligare och därmed kan kräva användning av markutrymme fördeponering. solar-moduler å andra sidan har ökat popularitet under de senaste åren.Detta beror främst på deras extremt höga flexibla förmåga att konvertera solbestrålningtill elektrisk och termisk energi. Denna studie kommer att försöka tillhandahålla enomfattande studie av användningen av ett hybridsolsystem som kombinerar en standardPV-modul med en flatplate collector för att simulera en solar-modul samt caselera enfristående version genom att uppskatta energikraven för en enkel bostad i Sverige ochKina. Detta kommer att vara huvudmålet med studien, men möjligheterna att integreradetta hybrida solsystem tillsammans med nuvarande DH-system kommer mestadels attdiskuteras i de första avsnitten för att bevisa möjligheten att utföra ett sådant system. Detteoretiska arbetet som utförs kommer endast att innehålla simuleringar av att bara ha enfristående PV- och flatplate collector module, men att utforma ett hybrid sol- och DHsystemkommer inte att vara huvudfokus för denna studie. Resultaten i slutet avrapporten drog överraskande slutsatsen att den elektriska produktionen för den svenskacaselen var märkbart högre än den för den kinesiska caselen trots att de båda caselernabibehöll samma belastningsvärden och högre solbestrålning för den kinesiska caselen.Detta kan förklaras av skillnaden i modulpriser vid simulering genom PVsyst därinvesteringskostnaden för den svenska PV-modulen (elektrisk komponent) var ungefär3,6 gånger större än den för kinesiska, vilket innebär att PVsyst antar ett störremodulområde för svensk modul och därmed mer energiproduktion. Men när det kom tillvärmeenergiproduktionen, var det möjligt att anta olika samlarfall och följaktligen valdesett område på 7m2 för det svenska perspektivet medan ett område på 4m2 har beaktatsför den kinesiska och värmevärden för användbar energi där jämfördes sedan med dekrav som krävs för uppvärmning i båda fallen. Slutligen drog avhandlingen slutsatsen attdet inte fanns något krav på att ha ett integrerat DH-nätverk i de fristående husen ochdärför kan det vara mer fördelaktigt att ha ett integrerat DH och solsystem i tätarebebyggda bostadsområden.

This masters thesis deals with technics of localization for wireless senzor networks with a focus on anchor free location algorithm by authors G. Jianquan and Z. Wei. It also describes the available simulations frameworks based on OMNeT++ platform and implementation of the anchor free algorithm in the simulation program Castalia. Furthermore, it deals with the energy demands of this algorithm based on results of simulations that were done for the communication unit IRIS.

This thesis explains basic, usually used constructional terms, describes the rules for drafting the projection drawings and it informs about legislative directives, which acompany every process of construction. It also mentions possibilities of building materials offered on the czech market. The work talks about wooden buildings, about constructions of bricks, enumerates advantages of insulation and presents the types of roofcoverings. It also describes the positives and negatives of classic heating and informs about new alternatives, which use bottomless natural sources. The most expanded windows in our country {--} thus the windows of wood and plastic are mentioned as well in the thesis. It presents some specialist´s opinions of most discussed themes in the building industry, it introduces new trends like thermal pump, solar collector and recuperation. Results of this work contain description of two solutionvariants, valuation of a detached house and determining of necessary construction costs. The thesis includes also a technical report and calculation of energy demands.

The Master Thesis evaluates the energy demands of two types of family houses. The calculations are performed using the national calculation tool NKN II and the simulation software TRNSYS. The results of both methods are compared and their differences explained. Both calculation tools are compared from the user point view and finally their applicability for project designers is evaluated.

Climate change is a global phenomenon that strongly affect cities and urban areas. Due to the intensive industrial activities and global population growth leading to more fossil energy demands for the last century, the global warming effect appeared to have been significantly exacerbated. To overcome the issues related to the increase of greenhouse emissions amplifying the global warming, multiple initiatives and engagements have appeared for the last 10 years in order to reduce our global energy demands and reduce the dependency to fossil energy and engage a transition to renewable energy. One way to achieve these objectives is to engage a technological and societal shift in the building industry by reducing energy demands and increasing local energy productions based on renewable energy or, at least, carbon neutral systems. In order to qualify these new types of construction, the concept of positive energy district (PED) has arisen through multiple initiative around the world. This thesis aims to assess the possibility to meet the PED requirements for the new Jakobsgardarna district extension project proposed by Sweco in Borlange, Sweden. This project is based on 144 buildings composed of schools, residentials, retails shop, and offices spread on an 80 ha of land. The Building Energy Modelling (BEM) has been performed on IDA ICE to assess the energy demands and energy production of the entire district following multiple scenarios. These simulations have been performed with either a district heating system or a heat pump as base system. Then, the models have been extended with photovoltaic (PV) panel in multiple configurations in order to find the bes tsolution to meet the PED requirements. First results of the baseline configuration (district heating) shows that the yearly energy demand was around 14,227 MWh which represent almost 69 kWh/m2, mainly dominated up to 75% by the heating demands including domestic hot water (DHW). Moreover, an uncomfortable situation has been met in almost all residential building during summer with temperature reaching up to 31°C. The second configuration considering a heat pump with bore holes in replacement of the district heating shows an overall yearly energy demands of 9,738 MWh representing 47.2kWh/m2 per heated area. This results in a 67% reduction of the energy demands in comparison with the base case. This is due to the high coefficient of performance (COP=4) of the heat pump compared to the district heating system’s (COP=1). In this configuration the heating demands still corresponds to 70% of the overall energy demands. The addition of PV panels compensated the entire electrical needs of the district when combined with district heating and even allowed to reach the positive energy requirements when combined with heat pumps with bore holes. The latter case generates up to 20% of electrical energy in excess of what it produced, even while considering solar panels at a15° of tilt angle in a region where the optimal inclination is defined at 45°. According to the preliminary results obtained in this study, positive energy requirements could be met by the combination of heat pump and PV panels according to our assumptions. This work could then be used to further refine the district design and propose suggestions to improve both the thermal modeling of the district and the design rules for architects and local stakeholders.

An objektive of this university graduation work is an essay about any possibilities for energy savings with operation optimalization of public lightings. Understandings and introduction operation problems of public lighting is devote in first part of this work. Here we can chapters as Importance of public lightings or Gulations and norms in ralation to public lightings. The bigist and special attention is concentrated to description to public lightings systems and it is basic components. Another main part of this work is demonstration of used systems that are leading to energy savings for public lightings. These problems are detailed and explained in chapter Regulation of public lighting systems. This graduation work is describing individual types of regulation with the systems that are used with these regulatios in systems of public lightings. The assignment of last part of graduation work was to make sample calculation of energy demand and calculatin of yearly consumption on exemplary temporary system of public lightings. For this occasion was extra special auxiliary application sytem set up inside the Microsoft Excel program where all individual calculations were done.

The submitted thesis focuses on establishing the extent of influence of material composition of selected segment of real estates (units) on their market price and price of the existing properties in the locality, including reasoning and experimental validation of market value (or market price) assessment methodology of the given property. It is indisputable that there are many subjective opinions and views of each individual assessor (of expert opinion) entering into the process of property assessment. Therefore it is necessary to “standardise” or rather unify, if possible, at least some input data in a way most likely preventing disproportions that are still a part of expert practise nowadays. The influence of material composition on the value (price) of the property, as for the relation to unit size, its locality and also its age and technical condition, is within this thesis verified first of all in computational phase of the assessment of the specific unit, when it in principle shows possible inaccuracy in assessing the final price of property, which should be avoided by a proper expert assessment. Practical impact and use of the influence of material composition is applied within the comparative method as one of several assessment methods that can be employed in establishing (assessment) of market value of the property.