No description available.

Zugl.: Dortmund, Techn. Univ., Diss., 2008

München, Techn. Univ., Diss., 2003.

Chemnitz, Techn. Univ., Diss., 2001.

Ethylene glycol intoxication, suicidal as well as accidental, belongs to serious, immediately life-threatening poisonings, which can however be cured even in the most severe cases (provided early recognition and correct treatment), including the restoration of renal function to the original state. Ethylene glycol is most notably present in anti-freeze cooling liquids for vehicles (such as Fridex). Consumption of 100-150 ml of such a solution is considered a lethal dose in humans. follows Oral ingestion is followed by rapid absorption. Metabolic decomposition takes place predominantly in the liver by way of alcohol dehydrogenase, to glycoaldehyde, which is further metabolised to glycolic acid and oxalic acid. The clinical aspect is dominated by acute renal failure which is caused by acute tubular necrosis. Toxicological examination including an assessment of ethylene glycol levels in both blood and urine, with prognostic relevance, is indispensable to diagnostics of the poisoning as well as from the standpoint of differential diagnostics. Therapeutic measures include gastric lavage within one hour of ingestion and administration of activated charcoal. Administration of ethanol and fomepizole, compounds that bind alcohol dehydrogenase and thus prevent the conversion of ethylene glycol to its toxic metabolites, is considered valid causal treatment with simultaneous early institution of hemodialysis (even in cases of hitherto intact renal function). As fomepizole is currently not available in the Czech republic, ethanol remains the only antidote. Therapy further includes correction of metabolic acidosis by way of bicarbonates, and intravenous application of thiamine and pyridoxine. Therapy of such a grave condition must entail infirmary care provided by professional nurses as a necessary complement. The nurse serves their function in securing the patient's airways, connecting the patient to mechanical ventilation, monitoring physiological functions, assistance with invasive entry, as well as conducting sample extractions, assuring proper hygiene, the prevention of decubitus ulcers etc. It has been the aim of an extensive effort during my analysis of this topic to collate an up-to-date summary of practical knowledge on ethylene glycol intoxication, as well as subsequent therapeutic options for such patients, based on collected information and available source material. This final thesis, entitled "Approach and Options for Nurses in Therapy of Ethylene Glycol-intoxicated Patients" has been created relying on a body of purely theoretical Czech and foreign sources. To attain awareness of the current state of medical sciences described on the following pages, many professional and scientific publications, books as well as journals and websites of registered professional societies had to be studied. The aim of a detailed inspection of such an extensive body of data has been to provide relevant findings based on the facts determined. The accumulated information is further specified in particular sections. The first deal with intoxication, elimination and first aid in the pre-hospitalization phase from a broader perspective. Without these elementary notes the thesis as a whole would lack in conclusiveness. From this section the thesis fluidly continues with ethylene glycol intoxication itself, its treatment and all the way to the role of the nurse including particular therapeutic measures. These sections contain specific recommendations issuing from news and cutting-edge research on ethylene glycol poisonings.

Reversible adsorption of nucleid acids on magnetic carriers was studied in this diploma thesis. Magnetic P(HEMA-co­-GMA) microspheres and magnetic glass particles were used. The aim of the study was to isolate DNA in suitable quality for polymerase chain reaction (PCR). Adsorption of DNA on magnetic carriers was achieved after DNA condensation by PEG and NaCl in separation mixture. PEGs of various molecular weight (600 and 6000 g/mol) and different concentrations of PEG in separation mixture (4, 8, 12, 16%) were used. Quantity of eluted DNA incerased with molecular weight and concentration of PEG in separation mixtures. Optimized experimental conditions were applied for the separation of DNA from chicken erythrocytes, purified DNA, DNA in crude lysates of bacterial cells of Lactobacillus paracasei ssp. paracasei CCDM 211/06 and from real samples (liquid dairy products, hard cheese). The presence of target DNA in eluates was tested using genus specific PCR (genus Lactobacillus) or species specific PCR (species Bifidobacterium longum) Aqueous two-phase system (liquid-liquid) was used for separation of DNA from real symplex, too. At first the condiotions aqueous two-phase systém creation were studied. It was created by 16% PEG of various molecular weight (600, 6000 g/mol) and by various concentration of ammonium sulphate. Reversible DNA adsorption on carboxyl group-containing magnetic nonporous P(HEMA-co-EDMA) microspheres for the isolation PCR-ready DNA from liquid dairy products containing PCR inhibitors was studied, too. The quality of isolated DNA was checked by PCR amplification.The presumption on the elimination of PCR inhibitors from DNA samples was confirmed.

The isolation of deoxyribonucleic acid (DNA) was studied in the diploma thesis by using three different methods: phenol extraction, salting with sodium chloride and magnetic separation with reversible adsorption of nucleic acids on different magnetic carriers. There were used five different properly functionalized carriers for the isolation of DNA: magnetic silicagel, P(HEMA-co-GMA) ox. I, P(HEMA-co-GMA) ox. II, Dynal DNA Direct and Perovskit 439. The reversible imobilization of DNA on the magnetic carrier was proceeded under the conditions of high concentration of NaCl and poly(ethyleneglycol) (PEG). There was induced the condensation of DNA by 2 M NaCl and PEG with molecular mass 6000 for binding of the DNA to the magnetic carriers and the final concentration of PEG in the separation mixture was 8 and 16 %. The aim was to gain the DNA of quality suitable for polymerase chain reaction (PCR). The DNA was isolated from the bacterial cultures of three probiotic strains, L. amylovorus CCM 4380T, L. zeae CCM 7069 T, L. plantarum CCM 7039T, which were cultivated in MRS medium. The DNA was also isolated from the fermented dairy products: Jihočeský zákys s ovocem jahoda (the fermented dairy product with the probiotic culture of Lactobacillus acidophilus, Bifidobacterium lactis and Streptococcus thermophilus), Revital active (the yogurt with inulin and the probiotic culture of Lactobacillus rhamnosus, Lactobacillus acidophilus and Bifidobacterium sp.) and Actimel višeň (the dairy product with the probiotic culture of Lactobacillus casei). When the PCR with the isolated DNA was passed off, the PCR products were detected by the gel electrophoresis with agarose. The success of the DNA isolation of the probiotic bacteria by phenol extraction, salting with NaCl and by magnetic separation, was verified by the PCR method. The method of magnetic separation using magnetic carriers was also verified for the isolation of DNA of quality suitable for PCR from the probiotic fermented dairy products.

Die vorliegende Dissertation beschäftigt sich mit der Synthese und Charakterisierung von Übergangsmetallkomplexen und deren Anwendungen in der MOCVD (= metal-organic chemical vapor deposition), sowie als Precursoren zur Darstellung von Nanopartikeln und Nanokompositen. Ein Schwerpunkt dieser wissenschaftlichen Arbeit liegt dabei in der Entwicklung von Me-, tBu- und SiMe3-substituierten Manganhalbsandwichkomplexen für die Generierung dünner Mangan-basierter Schichten mittels MOCVD-Technik. Die gezielte strukturelle Veränderung des Cyclopentadienyl-Liganden beeinflusst die physikalischen und chemischen Eigenschaften dieser Verbindungen, welche systematisch untersucht werden. Ein weiteres zentrales Thema dieser Arbeit ist die Entwicklung von Bis(β-diketonato)- und Allyl-(β-diketonato)-palladium(II) Verbindungen als MOCVD-Precursoren. Hierbei dienen asymmetrische β-Diketonate des Typs CH3COCCO(CH2)n (n = 3, 4) als Liganden. Zudem wird durch Substitutionsreaktionen mit Me- und tBu-Gruppen am η3-Allyl-Liganden Einfluss auf die Stabilität der Verbindungen genommen. Die Abscheidung dieser Precursoren führt, in Abhängigkeit des verwendeten Reaktivgases, zur Bildung von Palladium- bzw. Palladiumoxid-Schichten. Zudem wird die Synthese und Charakterisierung von Co(II)-Carboxylaten des Typs [Co(CO2CRR´(OC2H4)nOMe)2] (n = 1, 2; R = H, R´ = Me; R = H, R´ = Ph) beschrieben. Stellvertretend wird eine Verbindung als Single-Source Precursor zur Darstellung von Co3O4-Nanopartikeln eingesetzt. Darüber hinaus wird die Inkorporation von Co3O4-Nanopartikel in organisch-anorganische Hybridmaterialien mittels Zwillingspolymerisation vorgestellt.

Die vorliegende Dissertation beschäftigt sich mit der Synthese und Charakterisierung von Übergangsmetallkomplexen und deren Anwendungen in der MOCVD (= metal-organic chemical vapor deposition), sowie als Precursoren zur Darstellung von Nanopartikeln und Nanokompositen. Ein Schwerpunkt dieser wissenschaftlichen Arbeit liegt dabei in der Entwicklung von Me-, tBu- und SiMe3-substituierten Manganhalbsandwichkomplexen für die Generierung dünner Mangan-basierter Schichten mittels MOCVD-Technik. Die gezielte strukturelle Veränderung des Cyclopentadienyl-Liganden beeinflusst die physikalischen und chemischen Eigenschaften dieser Verbindungen, welche systematisch untersucht werden. Ein weiteres zentrales Thema dieser Arbeit ist die Entwicklung von Bis(β-diketonato)- und Allyl-(β-diketonato)-palladium(II) Verbindungen als MOCVD-Precursoren. Hierbei dienen asymmetrische β-Diketonate des Typs CH3COCCO(CH2)n (n = 3, 4) als Liganden. Zudem wird durch Substitutionsreaktionen mit Me- und tBu-Gruppen am η3-Allyl-Liganden Einfluss auf die Stabilität der Verbindungen genommen. Die Abscheidung dieser Precursoren führt, in Abhängigkeit des verwendeten Reaktivgases, zur Bildung von Palladium- bzw. Palladiumoxid-Schichten. Zudem wird die Synthese und Charakterisierung von Co(II)-Carboxylaten des Typs [Co(CO2CRR´(OC2H4)nOMe)2] (n = 1, 2; R = H, R´ = Me; R = H, R´ = Ph) beschrieben. Stellvertretend wird eine Verbindung als Single-Source Precursor zur Darstellung von Co3O4-Nanopartikeln eingesetzt. Darüber hinaus wird die Inkorporation von Co3O4-Nanopartikel in organisch-anorganische Hybridmaterialien mittels Zwillingspolymerisation vorgestellt.

Die Immobilisierung von Oligo(ethylenglykol)-derivaten an Oberflächen von Metallen ist ein viel versprechender Ansatz, um unspezifische Adsorptionen von Proteinen, Bakterien und Zellen zu minimieren bzw. zu verhindern. Im Mittelpunkt der Arbeit stand die Entwicklung, Darstellung, Charakterisierung sowie Applikation maßgeschneiderter, self-assembly-fähiger Moleküle, die gezielt auf TiO2- und nicht auf SiO2-Oberflächen anbinden. Die resultierenden Monoschichten (SAMs) wiesen eine Biokompatibilität sowie Biofunktionalität auf. Dazu wurden neue bisher noch nicht beschriebene Moleküle entwickelt, die auf einer Kombination von funktionalisierten Oligo(ethylenglykol)-Einheiten mit Monoalkylphosphorsäure- und Alkylphosphonsäurederivaten basieren. Diese Verbindungen konnten durch die Anwendung der Self-Assembly-Technik erfolgreich aus wässriger Lösung auf TiO2-Substrate adsorbiert werden. Die hergestellten, ultradünnen monomolekularen Schichten wurden mit verschiedenen analytischen Methoden, wie Spektroskopische Ellipsometrie, winkelabhängiger XPS und SPR-Spektroskopie charakterisiert. Durch eine gezielte Anbindung an TiO2-Oberflächen und einer stabilen Ausbildung von SAMs konnten sowohl die unspezifische Proteinadsorption zurückgedrängt bzw. verhindert, als auch eine spezifische Anbindung von ausgewählten Proteinen realisiert werden. / The surface immobilization of oligo (ethylene glycol) on metals is a promising approach to minimize or prevent non-specific adsorption of proteins, bacteria and cells. The aim of this work was the design, preparation, characterization and application of tailor-made, self-assembly molecules, which are able to adsorbed selectively on TiO2 surfaces but not on SiO2. The resulting self-assembled monolayers (SAMs) had a biocompatibility and bio functionality. For this purpose new molecules have been developed, which are not described in the literature. These compounds are derivatives of monoalkyl phosphoric acids or alkyl phosphonic acids and contain a terminal functional oligo (ethylene glycol) unit. The compounds were assembled on the TiO2-surface by self-assembly technique from aqueous solution. The adsorbed layers were characterized by different analytical tools, like angle resolved XPS, spectroscopic ellipsometry and SPR-spectroscopy. The selective adsorption of SAMs on TiO2-surfaces and the formation of stable SAMs make it possible to prevent or minimize non specific protein adsorption and also to bind selected proteins via specific surface reactions.