This masters thesis is focused around the designing and implementation of an anpplication that can extract information on speed of vehicles from radar data. The radar measurements were done by using a continous wave radar. The emphasis is placed on the computation of the angle in which the car approaches the radar and on the speed correction based on this angle. The final design was implemented in Matlab. The evaluation of the implemented solution was done on reference data.

This Master´s thesis examines Investigation of aircraft accidents / incidents, which were caused by human error. My thesis is focused on fixed wing aircrafts with maximum take off weight up to 2500 kg. Practices of Aircraft accident / incident Investigation are described in Annex L13 which is document published by Ministry of Transport of the Czech Republic. This document provides some support for investigators but does not contain methodology which should be used to discover human error by which the accident / incident was caused. This thesis has two major purposes. First purpose is to analyze Final reports of investigations and suggest improvements which can be made. Second goal of this thesis is to create own methodology for investigating the causes of aviation accidents / incidents caused by human factor.

This thesis is dedicated to the production of aluminum casting alloys. It maps the course of changes in the morphology of eutectic and its influence on mechanical properties during the long-term meltdown. In particular, the use of image analysis methods contributes to describing these processes. The presented results show that the eutectic shape does not change even during the meltdown for 110 minutes. There is only a roughing and an increase in grain size. There was also no influence on the mechanical properties that fit the practical application of the alloy examined

The introductory part of this diploma work contains a basic thought for the application of the heat pumps cascade connection and further I describe its function and define the notion of an optimum middle temperature.Then the direct comparison of two heats pumps cascade connection with an one-stage heat pump is shown there in a concrete example. The main part of the work is aimed to the determination of the most suitable variant for the heating and for the preparation of a hot service water in a benchmark family house. The systems of heatings are provided in options of a low-temperature floor heating and hot-water radiators. Both types of the heat pumps supply the warm to every heating system. It results into four possibles alternatives of the building heating.Besides of the alternatives mentioned above, a new variant of optimalised cascade connection was arisen during this work elaboration . The first stage of this connection which supplies the warm to the floor heating is disconnected out of the heating season and the second stage provides only a hot service water warming. The results of this work showed us that just this variant of a cascade connection causes savings in energy in comparison with an one-stage heat pump. In the conclusion of this work there are discussed the reached results and indicated the possibilities of a practical exploitation.

This master´s thesis deals with of human factor impact on optical fibers manipulation. It describes types and methods used for splicing and placing optical fibers and optical cables. These methods are specified in the chapters; their application in different environments and conditions is accentuated. This paper presents splicing optical fibers. It emphasizes problems which can occur if proper procedures aren´t kept or if improper device is used. In the thesis there is the chapter dealing with problems which can arise during splicing optical fibers - these negative influences are evaluated with educational equipments EF-970-01 PLASTIC by the company MIKROKOM, s.r.o. Another aim of the work is to describe mechanical optical fiber splice 3MTM FibrlokTM. This kind of device was lent for testing optical fibers multiple splicing. It was tested under extreme conditions. Statistically processed values of insertion loss and splice reflectance, measured by OTDR are the results of the test. Comparing measured values, technical report ones, regarding for usage in practice, there is a possibility of 75 multiple reusing of the mechanical optical fiber splice. The prediction of magnitude insertion loss, calculated for thousands splice cycles follows. The next part of the work deals with fusion splices and contains comparison of splices made with two cleavers: CORNING LWL-TRENNGERAT S46999-M9-D12 and the later model - Fitel S325A cleaver. The result is that older S46999-M9-D12 model gained lower attenuation. The results of both previous measurements are influenced by human factor. It appears at mechanical optical fiber splices as growing fluctuate of insertion losses and as the unequal attenuation fusion splices at tested cleavers.

This thesis contains description of the present methods and algoritms for measuring the quality of telephone call on the PBX Asterisk. Further develop the concept of a system for measuring and implementing the call embbeded system VOIPAC PXA270M. Based on theoretical analysis is carried out discussions between C, Java and PHP,which results in the selection of appropriate programming language suitable for implementation in embedded system. The concept is realized by creating an application written in a particular programming language. Part of this work is verification created application using experimental measurments of telecommunications system. The results of experimental measurements are discussed in the final evaluation.

The main aim of this thesis is to familiarize with options of services using real-time data transfer in wireless networks. Theoretical part presents wireless network based on IEEE 802.11 standard and its practical use. Large part is focuses on 802.11e standart, that provides support for quality of service in wireless networks. Furthemore this thesis deals with transport and applicaton protocols supporting multimedia streaming over computer network. Second chapter is focused on analyzing real computer network with purpose in measuring parametrs influencing quality of service such as bandwith, delay, jitter and loss. Last part deals with the design of wireless network in OPNET Modeler enviroment with focus on simulating parameters that influence quality of service.

The subject of my master thesis "Management of the human resources in the public administration" is to introduce the personal management and analyse the possibilities of application in public administration, directly in the Prison of the Czech Republic in the State Prison in Kuřim with a focus on training workers in different levels of management.

This master´s thesis is about searching for a connection between solar illumination and solar irradiance. The task is attempt to find out if it is possible to use one factor in order to determine the other one. Part of this thesis deals with cooling of virtual building.

The issue of energy saving building is a current topic of today. The increasing costs of operating buildings reduce economic efficiency of the organization operations. A large part of the operating cost is energy cost. An effective tool for improving the energy performance of buildings is an EPC method. The implementation of energy projects through EPC is offered by Energy Services Company. This thesis evaluates the economic efficiency of the project implemented by the EPC and analyses its risk factors. The subject of EPC project is modernisation of an energy sector of a hospital building. The economic efficiency of the project is interpreted on the basis of economic indicators Net Present Value, Internal Rate of Return and Profitability Index. There was also performed Monte Carlo simulation supported by Oracle Crystal Ball software within the analysis of risk factors for the project.