Diploma thesis describes the design and processing of project documentation of the multifunctional building. The multifunctional building is located in the central part of the town Náměšť nad Oslavou. The building has 4 floors. It is partly cellared building with flat roof and walkable terraces. This building is consisted of 2 functional parts, the first part is designed for living and the second one is designed for contact with the customer. There are shops and offices. The first floor is wheelchair accessible. In the basement there is a technical background of the building and cellars for housing units. In this multifunctional building we can find 13 residential units and five offices. All of the floors are connected with staircase and lift. The Carpark and the private garden with playground are also part of this residential area. This building is based on concrete blocks. Load-bearing, peripheral walls and connecting walls are made of ceramic blocks. A monolitic ceiling construction is the combination of the iron and the concrete. Two types of insulation are used in peripheral walls. The first one is called ETICS, external thermal insulation composite system, made of polystyrene. The second type of insulation is facade cladding system where the main insulation layer is made of mineral wool. The insulation layer is replaced by XPS polystyrene where facade is in contact with the ground. Facade cladding panels are made of cement and wood fibers called Cembrit.

The master´s thesis elaborates the project documentation for the construction of the District Police of the Czech Republic in Brno. The new building is situated in the north of city part Bohunice. It´s a three- floor object with partial basement and flat roof. The bearing perimeter masonry, internal bearing masonry and internal non- load bearing masonry are made with technology from ceramic hollow blocks. Ceiling construction is designed from prestressed ceiling panels. The perimeter walls of the of the underground floor are made from blocks of lost formwork, which is insulated with extruded polystyrene. The walls on the above- ground floors are insulated by a combination of contact thermal insulation system and ventilated facades with fiber- cement facade cladding boards.

Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.

The subject of the thesis is an architectural study of the reconstruction and extension of the "Centrum" department store in Brno. It is a dominant building designed by the famous czech architect Vladimir Karfík, which is located at the Urban Conservation Area Brno. Object wasn´t realized with the full extent of the original proposal, so in the project is planned a completion of it. The new solution respects the historical quality of Urban Conservation Area Brno with a concurrent view of the location on the lucrative land in the city center. The architectural concept is based on a return to the original idea of the architect and the addition of my own creative contribution within the extension of the new floors. Draft of the extension is intended so that the individual parts of an object communicate with each other, but they are easily recognizable as well. This idea was filled by both parts linked together visually by horizontal lines and ripple, which is used on balconies of the extension and behind the facade of the current building by shielding walls. However it is emphasized the contrast between an enclosed mass and a free-flowing space. The existing part of the building is used especialy as a leasable area of trade and services. On the upper floors there are areas of administration. Furthermore, there will be a restaurant and cafe with exhibition galleries and apartments are designed on the new added floors. The building is adapted to use by person with limited mobility. Newly added uses in the object will increase the attractiveness of the building and its surroundings.

The subject of this master thesis is a design of wine house which comes together with restaurant and accommodation in Strazovice near Kyjov. It includes design study and all the detailed drawings of the building. The building is designed with three services - winery, restaurant and accommodation. Winery is divided into separate rooms for wine processing, finishing and wine aging, also storage, distribution and sale of wine. Canteen service includes kitchen with accessories, restaurant with dining, separated lounge, vaulted cellar and room for degustation. Lounge, cellar and degustation room is primary determined for different corporate events, conferences, weddings, family events and others. For building were chosen descending lands at the edge of Strazovice.. The main reason for this decision is the view that this place provides because of its higher position. Also this village is a part of region, for which wine production is typical. The shape of the object is rectangular and consists of three floors. Two upper floors are receding with comparison to the first floor. This formed a part of terrace which is connected with the oval part on pillars. Basement is situated completely below ground, only the south side is partly uncovered. Construction is made of reinforced concrete. Ground floors are with ventilated frontage. Frontage of the first floor is covered with wooden cladding, and frontage of the second floor is covered with plaster. Vertical constructions are made of lime-sand blocks and horizontal constructions are reinforced concrete. The roof is built of wooden trusses with arched upper part. On the roof there are installed photovoltaic panels for electricity which is used in the building. Rainwater is held in tank, servers as a water supply for the building. Wastewater is depurated in small sewage plant which is further conducted into the building. Other wastewater is captured in the sump. Projection of the winery emphasis, inter alia, on static and

The topic of this master thesis is dealing with selected parts of the constructional and technological project of laboratoty pavilion for technology of AS in Brno. Thesis is mainly focused for technological instructions of ground works, support of next building and solving of city center problems. Components of this thesis are evaluation plans and work place safety protocols. Next content of thesis are study of main technological phases, time and finanical plans, items budget, selected details, construction site equipment and design and verification of tower crain.

This master's thesis focuses on design and elaboration of documentation for construction of a Car Showroom. The building is divided to two functional parts. The building is to be situated on plot number 1333/21, cadastre unit: Bohunice. The building is to be located on an undeveloped plot in possesion of the investor. The parking lots are connected to a local road. All substantial infrastructures are located nearby the plot. The proposition and the design of the building have respect for both commune plan and current buildings. The documentation is elaborated with regard to the contemporary Czech legislative and standards. The project designs the building, which is divided in two functional parts: SO 01 & SO 02, both operationally and visually connected. Contructions of objects are structurally independent. The first object includes exhibition hall with capacity of 8 exhibited cars. There is also to be located the administrative part, waiting rooms for customers, facilities for employees and the warehouse. The second object includes car repair shop. There are also to be located facilities for employees of the service, workshop, room for a car handover, hand car wash and an utility room. Construction is designed as a reinforced concrete columnar structural system with prefabricated single footings, self-supporting foundation slab and reinforced concrete ceiling slab with integrated girders above first floor of the object SO 01. The roofs of the building are designed as a flat roofs and the support constructions are made of steel. Planned dimensions of autosalon are 41x18 metres. As a cladding of the first object is used the lightweight glass cladding. For masonry walls are used the 250 mm thick ceramic blocks, mineral insulation and ventilated external facade cladding with use of fiber-cement boards. Planned dimensions of car repair shop are 31x28 metres. As a cladding of the second object are used the sandwich panels with foam core made of PIR.

Diploma thesis designs a barrier free new building of medical devices – policlinic (health center) with 14 medical workplaces. Object has three floors and basement. The building is covered by a vegetation flat roof. Building of policlinic is based on strip foundations and load-bearing walls are made from sand-lime blocks. Horizontal systém is created like reinforced concrete ceiling and in the same way internal staircase. The building is design at passive architecture – have compact form, thick layer of insulation and airtight cover. The main glass facade is oriented to the sout. There is used heat recovery air conditioning and heat pumping for heating in building. Health center satisfy currently legislation.

Master’s thesis deals with complete project documentation of newly built object of library and mediatheque located on the site in České Budějovice. It is a three-storey building divided into three parts, one-storey, two-storey and three-storey. It is partly basement. The underground part is devoted to main storage spaces of library services, management offices and social facilities for staff (toilets, changing rooms, washrooms). This part of the building has own entrance for employees. In the 1st floor is located the main library area along with exhibition spaces and the main entrance for visitors with self service cloakroom. In the 2nd floor are designed library spaces for visually impaired persons with fund of audio books, CDs and DVDs, a lecture hall with a projector and own kitchen and space for reading magazines and periodicals. From this floor is possible access to the outdoor terrace, which has own terrace furniture store nearby. In the 3rd floor is located a literary café with its own facilities. In each floor are also designed sanitary facilities for use by persons with limited ability of movement and orientation. All floors are connected by stairs and passenger lifts. In terms of construction, the building is designed as a frame, in the underground parts made of reinforced concrete, the overhead of glued laminated timber elements. The ceiling structure designed over the underground floor is monolithic reinforced concrete slab. The ceilings in the upper part are designed as a wooden beamed made of the glued laminated timber elements. The building has a pent roof created by wooden trusses assembled with punched metal plate fasteners. The foundations are designed as belts and footings. The study, detailed documentation, thermal-technical evaluation of selected structures and fire safety of the building are processed. For processing of the thesis were used software AutoCAD 2010, Teplo 2011, Area 2011, Ztráty 2011 and Fire NX 802 PRO.

Thesis on "Planetarium with coffee" is processed in the form of project documentation for construction. The proposed facility is designed as a two-storeyed without basement with the main ground plan dimensions of 52,8 x 27,47 m and is located near the village Lošov close to Olomouc. The building is operationally divided into a part intended for public entrance and a part for operation and maintenance. Loadbearing structural system is reinforced concrete monolithic skeleton based on monolithic reinforced concrete foundation footings. Ceiling structure consists of reinforced concrete, monolithic, locally supported, cross reinforced floor slab. Vertical external walls are made of ceramic blocks with contact thermal insulation system. Part of the front rounded facade is designed as glass fronted. The building is covered by a warm flat roof. Roof cladding consists of vegetation layers, walkable terrace or non-walkable structure of roof cladding. The planetarium itself is covered by a reinforced concrete dome with a thermal insulation layer of plates of foamed glass. Fillings of doors and windows are made of aluminum profiles with isolating triple glazing. The building meets the requirements for barrier-free use of buildings.