This dissertation presents the fabrication and analysis of in-fiber devices based on elliptical core D-shaped optical fiber. Devices created inside optical fibers are attractive for a variety of reasons including low loss, high efficiency, self-alignment, light weight, multiplexibility, and resistance to electromagnetic interference. This work details how D-fiber can be used as a platform for a variety of devices and describes the creation and performance of two of these devices: an in-fiber polymer waveguide and a surface relief fiber Bragg grating. In D-fiber the core is very close to the flat side of the ‘D’ shape. This proximity allows access to the fields in the fiber core by removal of the cladding above the core. The D-fiber we use also has an elliptical core, allowing for the creation of polarimetric devices. This work describes two different etch processes using hydrofluoric acid (HF) to remove the fiber cladding and core. For the creation of devices in the fiber core, the core is partially removed and replaced with another material possessing the required optical properties. For devices which interact with the evanescent field, cladding removal is terminated before acid breaches the core. Etching fibers prepares them for use in the creation of in-fiber devices. Materials are placed into the groove left when the core of a fiber is partially removed to form a hybrid waveguide in which light is guided by both the leftover core and the inserted material. These in-fiber polymer waveguides have insertion loss less than 2 dB and can potentially be the basis for a number of electro-optic devices or sensors. A polarimetric temperature sensor demonstrates the feasibility of the core replacement method. This work also describes the creation of a surface relief fiber Bragg gratings (SR-FBGs) in the cladding above the core of the fiber. Because it is etched into the surface topography of the fiber, a SR-FBG can operate at much higher temperatures than a standard FBG, up to at least 1100 degrees Celsius. The performance of a SR-FBG is demonstrated in temperature sensing at high temperatures, and as a strain sensor.

Ce travail de thèse a permis de montrer que la résolution latérale de gravure de lasers proches infrarouges nanosecondes pouvait être réduite en faisant passer le faisceau à travers des microbilles de verre ou des fibres de silice à embouts façonnés de telle manière à générer des jets photoniques. Sur du silicium la taille de gravure peut être réduite d’un facteur 44 comparée à celle d’une gravure directe sans jet photonique. Les densités de puissances atteintes permettent même d’envisager de graver le verre avec ce type de laser malgré sa très faible absorption à ces longueurs d’onde. Pour la première fois nous avons montré la possibilité d’obtenir des jets photoniques en sortie de fibre optique à embout façonné. Nous avons montré leur capacité à graver le silicium à l’échelle du micron et ce avec un laser proche infrarouge nanoseconde. La possible utilisation de fibres optiques est une condition clairement décisive à la réalisation d’un réel procédé laser capable de graver des motifs complexes et de façon répétée. / This work has shown that the lateral resolution etching using near infrared lasers nanoseconds could be reduced by passing the beam through a glass microsphere or a silica fibers with spheroid shape in such a way to generate photonic jets. Etching on silicon size with a glass microsphere can be reduced by a factor of 44 compared to that of a direct etching without photonic jet. Powers reached densities allow even consider burning the glass with this type of laser, despite its very low absorption at these wavelengths. For the first time we have shown the possibility of obtaining photonic jets coming-out of a spheroid-tip of fiber optic. We also have shown the ability to etch silicon at the micron scale using the near infrared nanosecond laser. The possible use of optical fibers is clearly a decisive condition for the realization of a laser capable of etching process real intricate designs and repeatedly.