I dagsläget är de flesta broar i Sverige tillverkade med betong eller stål. Dessa broar är många gånger förknippade med stora kostnader som ofta beror på underhåll och reparation. FRP, som står för Fiber Reinforced Polymer, är ett relativt nytt material i bärande stommar men är ett väl etablerat material i förstärkningssammanhang. I Europa och i synnerhet Nederländerna finns det flertal broar byggda i FRP. Men på grund av brist på normer och regelverk att luta sig emot sker det sällan någon form av brokonstruktion med FRP i Sverige. Detta examensarbete syftar till att undersöka befintliga normer och studera hur materialet FRP används vid förstärkning och konstruktion av broar. Vidare syftar även arbetet till att undersöka egenskaperna hos FRP som byggmaterial och jämföra det med konventionella material som stål och betong. FRP, också benämnd fiberkomposit, är ett kompositmaterial som kan sammanställas på flera olika sätt. Genom olika material som kombineras och olika tillverkningsprocesser som används kan man på så sätt ge individuell utformning till materialet för dess användning. Fördelarna med FRP är många, men i allmänhet har det god styrka, god beständighet samtidigt som det har en låg vikt. Detta resulterar i att inom brokonstruktion så ger det strukturen en minskad egenvikt, vilket i sin tur underlättar en mängd olika saker. Detta arbete visar på att FRP-material har fördelaktiga egenskaper och kan i vissa situationer vara mer gynnsamt att använda än stål eller betong. Dock som tidigare påpekat saknas det specifika Eurokoder för detta material. Däremot är vi säkra på att introduktionen av en ny Eurokod samt med uppmuntran från myndigheter kommer användningen av FRP inom brokonstruktion utan tvekan öka. / At present, most bridges in Sweden are made with concrete or steel. These bridges are often associated with high costs, which often depend on maintenance and repair. FRP, which stands for Fiber Reinforced Polymer, is a relatively new material in load-bearing structures but is a well- established material in the context of reinforcement. In Europe and in particular the Netherlands, there are several bridges built in FRP. But due to a lack of norms and regulations to lean against, there is rarely any kind of FRP bridge construction in Sweden. The aim of this thesis is to examine existing norms and study how the material FRP is used in the reinforcement and construction of bridges. Furthermore, this thesis also aims to investigate the properties of FRP as building material and compare it with conventional materials such as steel and concrete. FRP, also called fiber-composite, is a composite material that can be assembled in several different ways. Through various materials that are combined and different manufacturing processes used, one can thus provide individual designs for the material. The benefits of FRP are many, but generally it has good strength, good durability while having a low weight. This results in that within bridge construction, it gives the structure a reduced self-weight, which in turn facilitates a variety of things. This thesis shows that FRP materials have advantageous properties and in some situations can be more favorable to use than steel or concrete. However, as previously pointed out, there are no specific Eurocodes for this material. However we are sure that the introduction of a new Eurocode and encouragement from authorities will undoubtedly increase the use of FRP in bridge construction.

The deterioration of highway bridges and structures and the cost of repairing, rehabilitating, or replacing deteriorated structures is a major issue for bridge owners. An aging infrastructure as well as the need to upgrade structural capacity for heavier trucks adds to problem. Life-cycle cost analysis (LCCA) is a useful tool for determining when the deployment of fiber-reinforced polymer (FRP) composite components is an economically viable alternative for rehabilitating deteriorated concrete bridges. The use of LCCA in bridge design and rehabilitation has been limited. The use of LCCA for bridges on a project level basis has often been limited to the non-routine design of major bridges where the life-cycle cost model is customized. LCCA has historically been deterministic. The deterministic analysis uses discrete values for inputs and is fairly simple and easy to do. It does not give any indication of risk, i.e. the probability that the input values used in the analysis and the resulting life-cycle cost will actually occur. Probabilistic analysis accounts for uncertainty and variability in input variables. It requires more effort than a deterministic analysis because probability distribution functions are required, random sampling is used, and a large number of iterations of the life-cycle cost calculations are carried out. The data needed is often not available. The significance of this study lies in its identification of the parameters that had the most influence on life-cycle costs of concrete bridge and how those parameters interacted. The parameters are: (1) Time to construct the new bridge; (2) traffic volume under bridge (when applicable); (3) value of time for cars; and (4) delay time under the bridge during new bridge construction (when applicable). Using these parameters the analyst can now “simulate” a probabilistic analysis by using the deterministic approach and reducing the number of iterations. This study also extended the use of LCCA to bridge rehabilitations and to bridges with low traffic volumes. A large number of bridges in the United States have low traffic volumes. For the highway bridge considered in the parametric study, rehabilitation using FRP had a lower life-cycle cost when compared to the new bridge alternative.

The fiber reinforced polymer (FRP) bars have been widely used in pre-stressing applications and reinforcing of the civil structures. High strength-to-weight ratio and high resistance to the corrosion make the FRP bars a good replacement for steel reinforcing bars in civil engineering applications. According to the CAN/CSA-S806-12 standard, the maximum recommended stress in FRP bars under service loads should not exceed 25% and 65% of the ultimate strength for glass FRP (GFRP) and carbon FRP (CFRP), respectively. These stress values are set to prevent creep failure in FRP bars. However, for in-service applications, there are few physical indicators that these values have been reached or exceeded. In this work analysis of acoustic emission (AE) signals is used. Two new techniques based on pattern recognition and frequency entropy of the isolated acoustic emission (AE) signal are presented for monitoring damage progression and prediction of failure in FRPs. / May 2017

Neste trabalho avaliou-se a influência da forma da seção transversal e da excentricidade do carregamento sobre o efeito de confinamento em pilares de concreto encamisados com polímeros reforçados com fibras (PRF). Para estas avaliações foi utilizada a análise experimental, por meio de ensaios de pilares sob flexo-compressão, e a análise numérica com o método dos elementos finitos. Observou-se que ocorreram reduções significativas dos efeitos de confinamento em pilares de seção quadrada e retangular quando a relação entre o raio de arredondamento dos cantos e o maior lado da seção transversal diminuiu. A influência da relação entre o lado maior e menor, no caso de pilares de seção retangular, não foi tão significativa se comparada ao efeito redutor do raio de arredondamento mencionado anteriormente. Ocorreram ganhos de resistência em todos os pilares ensaiados, indicando que o encamisamento com PRF pode ser utilizado mesmo em situações em que a força de compressão seja aplicada com pequenas excentricidades. O efeito da excentricidade sobre o confinamento dependeu da forma da seção transversal considerada. Em pilares de seção circular a excentricidade reduziu levemente os efeitos de confinamento. Nos pilares de seção quadrada a excentricidade não reduziu significativamente os efeitos de confinamento, sendo que para os menores raios de arredondamento o efeito de confinamento foi até maior na presença da excentricidade. Nos pilares de seção retangular observou-se que aplicando a excentricidade na direção da menor inércia o comportamento foi semelhante ao dos pilares de seção quadrada. Porém, aplicando a excentricidade na direção da maior inércia observou-se um grande efeito de confinamento, maior inclusive que no pilar centrado. / In this work the influence of the cross section shape and eccentricity of the compressive load on the confinement of concrete columns wrapped by fiber reinforced polymer (FRP) was evaluated. Experimental analysis, through flexural compression tests of columns, and numerical analysis developed through the finite element method were used to study these effects. Significant reductions of confinement effects were noticed in square and rectangular cross sections when the ratio of the round off radius to the major side of the column was reduced.The ratio between the major and minor side in rectangular columns was not so important to define the effectiveness of confinement as was the fore mentioned factor. Increases of strength were noticed in all columns tested, showing that FRP wrapping can be successfully used even with small eccentricities of loading. The effect of the eccentricity on the confinement showed to be dependent on the cross section shape. In circular columns the eccentricity of loading reduced the confinement effects. For the square cross section columns tested the confinement was not significantly affected by the eccentricity. In fact, for square columns with low round off radius, the eccentricity increased the confinement effects. Rectangular columns subjected to eccentric loading in the direction of the minor inertia showed a behavior similar to square columns. On the other hand, with the eccentricity applied in the direction of the major inertia, an important confinement effect was observed, more important than in the case of concentric loading.

The performance of reinforced concrete (RC) columns during recent earthquakes has clearly demonstrated the possible failures associated with inadequate confining reinforcement. The confinement reinforcement requirements of older codes were less stringent than present standards. Many studies were conducted by applying different retrofitting techniques for RC columns that have inadequate confinement reinforcement. A new retrofitting technique by means of Carbon Fiber Reinforced Polymer (CFRP) was developed and tested in many countries in the last decade. This technique is performed by CFRP wrapping the critical region of columns. The effectiveness of CFRP retrofitting technique was shown in many studies conducted worldwide. In Turkey, the frame members are considerably deficient from the seismic detailing point of view. Therefore, in order to use the CFRP retrofitting technique effectively in Turkey, experimental evidence is needed. This study investigates the performance of CFRP retrofitted RC columns with deficient confining steel and low concrete strength. It was concluded by experimental and analytical results that the CFRP retrofitting method can be implemented to seismically deficient columns. Moreover, two design approaches were proposed for CFRP retrofit design of columns considering safe design regulations.

Due to their practical application, flat-plates have been commonly used slab type in constructions in recent years. According to the investigations that were performed since the beginning of the 20th century, the vicinity of the slab-column connection is found to be susceptible to punching failure that causes serious unrepairable damage leading to the collapse of the structures. The objective of this study is to enhance the punching shear strength of slab-column connections in existing deficient flat plate structures. For this purpose, an economical and easy to install strengthening method was applied to &frac34 / scale flat-slab test specimens. The proposed strengthening scheme employs the use of in house-fabricated Carbon Fiber Reinforced Polymer (CFRP) dowels placed around the column stubs in different numbers and arrangements as vertical shear reinforcement. In addition, the effect of column aspect ratio on strengthening method was also investigated in the scope of this study. Strength increase of at least 30% was obtained for the CFRP retrofitted specimens compared to the companion reference specimen. Three-dimensional finite element analyses of test specimens were conducted by using the general purpose finite element analyses program. 3-D finite element models are successful in providing reasonable estimates of load-deformation behavior and strains. The experimental punching shear capacities and observed failure modes of the specimens were compared with the estimations of strength and failure modes given by punching shear strength provisions of ACI 318-08, Eurocode-2, BS8110-97 and TS500. Necessary modifications were proposed for the existing provisions of punching shear capacity in order to design CFRP upgrading.

This research project, funded by the Federal Highway Administration (FHWA Project DTFH61-02-C-0097), focuses mainly on alkali-silica reaction (ASR) and techniques to mitigate the effects of alkali-silica reaction in hardened concrete. A large portion of this report discusses the construction and design of an outdoor exposure site built at the University of Texas at Austin where the goal was to cast field representative concrete elements with laboratory precision and expose them to real environmental conditions. The elements were monitored for expansion and deterioration. At discrete expansion levels a range of mitigation methods were implemented on the structures. After the concrete elements were treated, long-term monitoring was conducted to determine the best approach to provide effective suppression of alkali-silica reaction in the various element types. / text

Due to inadequate lateral stiffness, many reinforced concrete buildings are highly damaged or collapsed in Turkey after the major earthquake. To improve the behavior of such buildings and to prevent them from collapse, repair and/or strengthening of some reinforced concrete elements is required. One of the strengthening techniques is the use of CFRP sheets on the existing hollow brick masonry infill. While using the CFRP sheets their attachment to both structural and non-structural members are provided by CFRP anchor dowels. In this study, by means of the prepared test setup, the pull-out strength capacities of CFRP anchor dowels are measured. The effects of concrete compressive strength, anchorage depth, anchorage diameter, and number of fibers on the tensile strength capacity of CFRP anchor dowel are studied.

Neste trabalho avaliou-se a influência da forma da seção transversal e da excentricidade do carregamento sobre o efeito de confinamento em pilares de concreto encamisados com polímeros reforçados com fibras (PRF). Para estas avaliações foi utilizada a análise experimental, por meio de ensaios de pilares sob flexo-compressão, e a análise numérica com o método dos elementos finitos. Observou-se que ocorreram reduções significativas dos efeitos de confinamento em pilares de seção quadrada e retangular quando a relação entre o raio de arredondamento dos cantos e o maior lado da seção transversal diminuiu. A influência da relação entre o lado maior e menor, no caso de pilares de seção retangular, não foi tão significativa se comparada ao efeito redutor do raio de arredondamento mencionado anteriormente. Ocorreram ganhos de resistência em todos os pilares ensaiados, indicando que o encamisamento com PRF pode ser utilizado mesmo em situações em que a força de compressão seja aplicada com pequenas excentricidades. O efeito da excentricidade sobre o confinamento dependeu da forma da seção transversal considerada. Em pilares de seção circular a excentricidade reduziu levemente os efeitos de confinamento. Nos pilares de seção quadrada a excentricidade não reduziu significativamente os efeitos de confinamento, sendo que para os menores raios de arredondamento o efeito de confinamento foi até maior na presença da excentricidade. Nos pilares de seção retangular observou-se que aplicando a excentricidade na direção da menor inércia o comportamento foi semelhante ao dos pilares de seção quadrada. Porém, aplicando a excentricidade na direção da maior inércia observou-se um grande efeito de confinamento, maior inclusive que no pilar centrado. / In this work the influence of the cross section shape and eccentricity of the compressive load on the confinement of concrete columns wrapped by fiber reinforced polymer (FRP) was evaluated. Experimental analysis, through flexural compression tests of columns, and numerical analysis developed through the finite element method were used to study these effects. Significant reductions of confinement effects were noticed in square and rectangular cross sections when the ratio of the round off radius to the major side of the column was reduced.The ratio between the major and minor side in rectangular columns was not so important to define the effectiveness of confinement as was the fore mentioned factor. Increases of strength were noticed in all columns tested, showing that FRP wrapping can be successfully used even with small eccentricities of loading. The effect of the eccentricity on the confinement showed to be dependent on the cross section shape. In circular columns the eccentricity of loading reduced the confinement effects. For the square cross section columns tested the confinement was not significantly affected by the eccentricity. In fact, for square columns with low round off radius, the eccentricity increased the confinement effects. Rectangular columns subjected to eccentric loading in the direction of the minor inertia showed a behavior similar to square columns. On the other hand, with the eccentricity applied in the direction of the major inertia, an important confinement effect was observed, more important than in the case of concentric loading.

Implicit in current design practice of minimum uplift capacity, is the assumption that the connection's capacity is proportional to the number of fasteners per connection joint. This assumption may overestimate the capacity of joints by a factor of two or more and maybe the cause of connection failures in extreme wind events. The current research serves to modify the current practice by proposing a realistic relationship between the number of fasteners and the capacity of the joint. The research is also aimed at further development of non-intrusive continuous load path (CLP) connection system using Glass Fiber Reinforced Polymer (GFRP) and epoxy. Suitable designs were developed for stud to top plate and gable end connections and tests were performed to evaluate the ultimate load, creep and fatigue behavior. The objective was to determine the performance of the connections under simulated sustained hurricane conditions. The performance of the new connections was satisfactory.