CIVINS / Field studies have demonstrated that it is possible to evaluate the state of many shipboard systems by analyzing the power drawn by electromechanical actuators. One device that can perform such an analysis is the non-intrusive load monitor (NILM). This thesis investigates the use of the NILM as a supervisory control system in the engineering plant of gas-turbine-powered vessel. Field tests demonstrate that the NILM can potentially reduce overall sensor count if used in a supervisory control system. To demonstrate the NILM's capabilities in supervisory control systems, experiments are being conducted at the U.S. Navy's Land-Based Engineering Site (LBES) in Philadelphia, Pennsylvania. Following a brief description of the LBES facility and the NILM itself, this thesis presents testing procedures and methodology with results obtained during the extensive field studies. This thesis also describes the on-going efforts to further demonstrate and develop the NILM's capabilities in supervisory control systems. / CIVINS / US Naval Academy (USNA) author.

Approved for public release; distribution is unlimited / Reissued 30 May 2017 with Second Reader’s non-NPS affiliation added to title page. / The scalar reciprocity equation commonly stated in underwater acoustics relates pressure fields and monopole sources. It is often used to predict the pressure measured by a hydrophone for multiple source locations by placing a source at the hydrophone location and calculating the field everywhere for that source. That method, however, does not work when calculating the orthogonal components of the velocity field measured by a fixed receiver. This thesis derives a vector-scalar reciprocity equation that accounts for both monopole and dipole sources. This equation can be used to calculate individual components of the received vector field by altering the source type used in the propagation calculation. This enables a propagation model to calculate the received vector field components for an arbitrary number of source locations with a single model run for each received field component instead of requiring one model run for each source location. Application of the vector-scalar reciprocity principle is demonstrated with analytic solutions for a range-independent environment and with numerical solutions for a range-independent and a range-dependent environment using a parabolic equation model. / Electronics Engineer, Naval Undersea Warfare Center

The primary objective of fusion research is to realize a thermonuclear fusion power plant. The main method to confine the hot plasma is by using a magnetic field. The reversed-field pinch is a type of magnetic confinement device which suffers from variety of magnetohy- drodynamic (MHD) instabilities. A particular unstable mode that is treated in this work is the resistive wall mode (RWM), which occurs due to the current gradient in the RFP and has growth rates of the order of the magnetic diffusion time of the wall. Application of control engineering tools appears to allow a robust and stable RFP operation.A model-based approach to stabilize the RWMs is pursued in this thesis. The approach consists of empirical modeling of RWMs using a class of subspace identification methodology. The obtained model is then used as a basis for a model based controller. In particular the first experimental results of using a predictive control for RWM stabilization are obtained. It is shown that the formulation of the model based controller allows the user to incorporate several physics relevant phenomena along with the stabilization of RWM. Another use of the model is shown to estimate and compensate the inherent error field. The results are encouraging, and the methods appear to be generically useful as research tools in controlled magnetic confinement fusion. / Fusionsforskningens primära mål är att förverkliga en ny typ av kraftverk baserade på termonukleär fusion. Den viktigaste metoden för att innesluta det heta plasmat är användandet av  magnetfält. ”Reverserat-fält pinch” (RFP) är en typ av anläggning för magnetisk inneslutning av fusionsplasma som uppvisar ett flertal magneto-hydrodynamiska instabiliteter. En specifik instabil mod som behandlas i detta arbete är”resistiv-vägg” moden (RWM). Den orsakas av strömgradienten i RFPn och tillväxer med en tidskonstant som är av samma storleksordning som magnetfältets diffusionstid i det omgivande metallskalet.  Tillämpning av verktyg från reglerteknikområdet förefaller tillåta en robust och stabil RFP drift. I detta arbete används ett modell-baserat tillvägagångssätt för kompensering av RWM. Det innefattar empirisk modellering av RWM med användning av ”subspace” system-identifieringsmetoder. Den erhållna modellen används sedan som grund för en modell-baserad regulator. De första experimentella resultaten från modell-prediktiv kompensering av RWM har erhållits.  I detta arbete har också visats att formuleringen av den modellbaserade regulatorn tillåter användaren att integrera flera relevanta fysikaliska aspekter förutom RWM. Ytterligare en användning av modellen är för att göra uppskattning och kompensering av avvikelser i anläggningens magnetfält, så kallade fält-fel. Resultaten är uppmuntrande, och det förefaller som om de undersökta metoderna är allmänt användbara som verktyg för forskning om magnetisk inneslutning av fusionsplasma. / <p>QC 20170202</p>

The retriever breeds have the same origin and have long been used as a gundog for hunting of game, mostly birds. However, recently the retriever breeds have become a popular pet and show dog. This have affected the breeding of the dogs as the same traits are not bred for a gundog and a pet or show dog. Breeds as the Labrador retriever consists of a field- and common-type. The aim of this study is to investigate any differences between and within five of the retriever breeds in behaviours as retrieving, search and game reaction. 64 dogs undergoing the field trial Description of Function- Retriever was video recorded and scores from 430 dogs that have undergone field trials was obtained. Both differences between and within breeds were found when analysing both the videos and scores. In the video analysis, the Flatcoated retriever showed the most retrieving behaviours and was the most passive. The Nova scotia duck tolling retriever was in both the video and score analyses the most active breed. The Labrador retriever scored high in game reaction. The field- and mixed-types had almost always higher scores in behaviours linked to hunting, compared to the common-type. This supports findings that recent selection in breeding have a larger effect on behaviour than the origin uses of the dogs.

No description available.

One of the purposes of this work is to investigate modifications that have to be made to a standard source-modulation microwave spectrograph so that it can be used to study gases at various temperatures. Another objective in this work is to determine experimentally the function of temperature that describes how the line widths of microwave spectral lines vary with changing temperature. The most important segment of the study is the temperature dependence of the line width since from an accurate knowledge of this temperature dependence one is able to determine what molecular force fields are present and the relative importance of parts of the molecular force field.

This problem involves an effort to determine the interrelationship of groups of secondary student teachers' sociabilities, first teaching field choice and preference of lecture or group method of instruction.

Approved for public release; distribution is unlimited / The harsh radiation environment of space, the propensity for SEUs to perturb the operations of a silicon based electronics, the rapid development of microprocessor capabilities and hence software applications, and the high cost (dollars and time) to develop and prove a system, require flexible, reliable, low cost, rapidly developed system solutions. Consequently, a reconfigurable Triple Modular Redundant (TMR) System-on-a-Chip (SOC) utilizing Field Programmable Gate Arrays (FPGAs) provides a viable solution for space based systems. The Configurable Fault Tolerant Processor (CFTP) is such a system, designed specifically for the purpose of testing and evaluating, on orbit, the reliability of instantiated TMR soft-core microprocessors, as well as the ability to reconfigure the system to support any onboard processor function. The CFTP maximizes the use of Commercial Off-The-Shelf (COTS) technology to investigate a low-cost, flexible alternative to processor hardware architecture, with a Total Ionizing Dose (TID) tolerant FPGA as the basis for a SOC. The flexibility of a configurable processor, based on FPGA technology, will enable on-orbit upgrades, reconfigurations, and modifications to the architecture in order to support dynamic mission requirements. The CFTP payload consists of a Printed Circuit Board (PCB) of 5.3 inches x 7.3 inches utilizing a slightly modified PC/104 bus interface. The initial FPGA configuration will be an instantiation of a TMR processor, with included Error Detection and Correction (EDAC) and memory controller circuitry. The PCB is designed with requisite supporting circuitry including a configuration controller FPGA, SDRAM, and Flash memory in order to allow the greatest variety of possible configurations. The CFTP is currently manifested as a Space Test Program (STP) experimental payload on the Naval Postgraduate School's NPSAT1 and the United States Naval Academy's MidSTAR-1 satellites. / Major, United States Marine Corps

Doctor of Philosophy / Department of Chemistry / Paul E. Smith / Computer simulations have provided a wealth of information concerning a wide range of systems. The precision of computer simulation results depends on the degree of sampling (time scales) achieved, while the accuracy of the results (given sufficient sampling) depends on the quality of force field used. A force field provides a description of the energy for a system of interest. Recently, we have been developing a Kirkwood Buff (KB) force field for molecular dynamics simulations of biological systems. This force field is based on the KB Theory of solutions, emphasizing the accurate description of intermolecular interactions, and reasonably reproducing a range of other physical properties from experiment. In this approach simulation results in terms of KB integrals can be directly compared with experimental data through a KB analysis of the solution properties. The approach therefore provides a simple and clear method to test the capability of a force field. Here we firstly studied a series of alcohol-water mixtures in an attempt to validate the transferability and additivity of the force field. A general fluctuation theory was applied to investigate the properties of these systems, and to compare with computer simulation results. The possible effects of cosolvents on peptides and proteins were then investigated using N-methylacetamide as model for the peptide backbone and urea as cosolvent. A possible explanation for the urea denaturation of protein structure was provided using a thermodynamics point of view involving transfer free energies and preferential interactions obtained from the KB integrals. Finally, potentials for protein backbone and sidechain torsions were developed by fitting to quantum mechanical calculations and NMR data. Simulations of a variety of peptides and proteins in aqueous solutions were then performed to demonstrate the overall reliability of the force field.

Master of Science / Department of Geology / Matthew W. Totten / The area of study for this project is the Leach Field, which is located in Jackson County, Kansas. Production in the Leach Field has historically been disappointing, with 388,787 barrels of oil being produced since the field’s discovery in 1963 (KGS, 2015). Production of the field has been highly variable, with only 20,568 barrels of oil being produced in the last 20 years. Economic and other concerns that have impacted production and production rates of the field include: low oil prices soon after its discovery, numerous changes of ownership, and lack of significant production infrastructure in the area. Stroke of Luck Energy & Exploration, LLC. has recently purchased the majority of the leases and wells in the Leach Field, and is reestablishing the field as a productive oil field. Plans include: washing down several plugged and abandoned wells, and drill new wells to increase production in the field. The goal of this study was to determine the major geologic factors controlling reservoir quality in the Hunton and Viola Limestone Formations in the Leach Field, so that a future exploration model can be developed to help increase and stabilize the field's overall production. This model was created by applying several testing methods including: well logging analysis, microscope analysis, and subsurface mapping. Based on these results it was determined that the quality of the reservoir rocks is controlled by the degree of dolomitizaiton in both formations. Reservoir quality is as important as structure in determining well productivity in the Leach Field.