No description available.

No description available.

No description available.

Crickets rely on binaural comparisons of intensity to locate sound. Intensity can be encoded by response magnitude as well as response latency. The effects of sound intensity and pulse repetition rate on the auditory responses of the tympanal nerve were investigated. Adaptation, a decline in the response due to repeated stimulation, is greater for higher pulse rates and higher intensities. Since sound intensity is louder at the ear closer to the sound source, adaptation is more pronounced in the ipsilateral ear. As a result, the interaural difference in response magnitude decreases. Therefore response magnitude cannot be a reliable cue for sound location. I found that response latency also adapts: it increases over time. However, this change is not intensity dependent. So interaural latency difference is stable over time. The results show that interaural latency difference is a more reliable cue than interaural magnitude difference to locate sound.

Vacuum field emission devices have become a promising candidate for emerging display technology due to their interesting properties compared to conventional thermionic emission devices that require high temperature and power to operate. Unlike thermionic emission, field emission devices can induce the electrons to emit at low temperature; sharp and thin emitters on the cathode are desired in order to increase the field emission. Many candidates from other research groups, such as Carbon Nanotubes (CNTs), SiC and ZnO, appear to have high field emission, but their complicated fabrication processes are the drawback. The silicon nanowhiskers produced by Geological & Nuclear Sciences (GNS) using Electron-Beam Rapid Thermal Annealing (EB-RTA) are an alternative material that is fast, inexpensive and uncomplicated to produce. They are based on the thermal desorption of silicon oxide, which forms silicon nanowhiskers on the silicon wafer in a short duration. Field emission diode structures on Silicon on Insulator (SOI) wafers were fabricated in order to investigate the field emission due to these GNS silicon nanowhiskers. An uncomplicated fabrication process using photolithography and etching process was developed. Electron beam lithography (EBL) was also used to create the different feature sizes directly onto the SOI wafer. The silicon nanowhiskers grown on these structures are as high as 35 nm with density distribution up to 30 µm⁻¹. The electrical characteristics of these devices are diode-like when the voltage range from -40 V to 40 V is applied. The best samples produced an emitted current as high as 2 mA, which is suitable for many applications, such as flat panel displays, x-ray sources and high frequency devices. However, in some cases, the diode structures failed to show the diode-like characteristics, perhaps as a result of bad contact connections or the emitters have been worn out after applying high voltage for some time. Device life time and stability were also considered and investigated via a number of electrical measurements for a period of time as long as one hour in this study. Even though these nanowhiskers have shown promising results, there are still many aspects to be considered to improve the experiments, such as the vacuum system and better contacts.

When light energy input exceeds the capacity for photosynthesis the plant need to dissipate the excess energy and this is done through non-photo-chemical quenching (NPQ). Photochemical quenching (photosynthesis), NPQ and fluorescence are three alternative faiths of excited chlorophylls. PsbS associates to photosystem II and is involved in NPQ. The results presented in this thesis were generated on Arabidopsis plants and mainly based on wildtype Col-0 together with a mutant deficient in PsbS (npq4) and a transgene overexpressing PsbS (oePsbS). We connect light and herbivore stress and show that the level of PsbS influences the food preference of both a specialist (Plutella) and a generalist (Spodoptera) herbivore as well as oviposition of Plutella. Level of PsbS also affects both metabolomics and transcriptomics of the plant; up-regulation of genes in the jasmonic acid (JA) -pathway and amount of JA has been found in the npq4 plants after herbivory. Since many experiments were performed in field we have also characterized the field plant and how it differs from the commonly used lab plant. We have also studied the natural variation of NPQ in Arabidopsis plants both in the field and the lab. The results show surprisingly no correlation. / Överskottsenergi kan vara skadligt för en växts membran och fotosynteskomplex. Vid överskott av solenergi blir fotosystemen mättade och växten behöver därför ett sätt för att göra sig av med all överskottsenergi, detta kallas för ”icke-fotokemisk quenching” (NPQ). Fotokemisk quenching (fotosyntes), NPQ och fluoresens är tre alternativa vägar för exalterade klorofyller. PsbS är involverad i NPQ och associerar med fotosystem II. De resultat som presenteras i denna avhandling kommer från studier av modellväxten Arabidopsis thaliana (Backtrav), i huvudsak gjorda på vildtypen i jämförelse med en mutant som saknar PsbS (npq4) och en transgen som överuttrycker PsbS (oePsbS). Vi har försökt att undersöka kopplingen mellan ljus- och herbivoristress och visar här att mängden PsbS påverkar både en specialist (Plutella) och en generalist (Spodoptera) insekt vid val av föda, samt Plutella även vid äggläggning. Växternas nivå av PsbS visade sig även påverka metabolomet och transkriptomet, och vi fann en uppreglering av gener i biosyntesen för jasmonat samt mer av själva hormonet jasmonat i npq4 växter efter herbivori. Eftersom vi har gjort många av experimenten ute i fält har vi även karakteriserat en typisk Arabidopsis växt i fält samt hur denna skiljer sig från den vanligt använda lab-växten. Dessutom har vi även undersökt naturlig variation av NPQ av Arabidopsis både i fält och på lab och resultaten visar, till vår förvåning, att det inte går att finna någon korrelation mellan dessa.

Within recent years, numerous fields of engineering, like mechanics, optics and electronics, have been influenced and revolutionised by the technique of microand nano-structuring. For example, special optical elements for beam shaping, surface structures for the reduction of friction or modern "lab on chip" devices have been produced. Within this thesis a universal system has been developed facilitating the production of such structured surfaces with dimensions down to 500 nm. This system is not only capable of structuring surfaces by means of lithographic processes; it further allows the inspection of surfaces by scanning their topography. To realise such a system, two different technologies have been evaluated: Scanning Near-field Optical Lithography (SNOL), a very sophisticated technique which uses a thin fibre tip to expose a photo resist-covered surface, and confocal scanning technology. Here, the confocal scanning is accomplished using an adapted optical component, the optical pickup unit (OPU), from a gaming console, which turned out to be the most suitable and cost-efficient solution for the realisation of this system. Several test series have been carried out during this work, to verify the performance of the confocal system, both to structure photo resist surfaces and to characterise unknown surfaces. This present work will show the ability of the developed system to produce structures down to the sub-micron range and to characterise unknown surfaces with sub- micron precision. Various patterns have been written into photo resistcoated substrates to structure their surface. Beginning with diffractive optical elements (DOE) for beam shaping, followed by Dammann gratings for twodimensional beam shaping and optical gratings for light guidance as well as producing technical surfaces imitating the properties of sharkskin or simple micromechanical structures, the developed confocal system has shown itself to be flexible and widely-applicable. IV During the development of the confocal system, a strong need for a beam profiling system analysing the light beam diverging from the OPU, was recognised. Due to the fact that no commercially available system was capable of characterising beam sizes within the range of the diffraction limit, a novel method for beam profiling was invented. This method makes use of the fibre tips already applied within the SNOL system, producing tomographical scans of the beam spot.

Schools inspections investigation has shown that most pedagogues are experiencing significant challenges to stimulate students and to invite students to participate and to influence the teaching structure and content. This study is based in the school inspections school questionnaire from 2013 which shows that Vallentuna high school results in two categories stimulation as well as participation and influence gets a low index value compared to all participating school units. Previous research has shown that the field studies creates greater amount of stimulation, increases students’ participation and provide experience of a bigger influence. Careful preparations are also important and the right form of field studies. This study will be using a quantitative student questionnaire and qualitative interviews with teachers to examine how students value the field studies as stimulating methodology of teaching and if the participation and influence increases with the help of field studies outside of school. The study will also examine whether there are differences between students in different year. Vallentuna high school students experience field studies, more fun, more interesting and stimulating than usual schoolwork. At the same time raises field studies student participation and thereby creates favorable conditions for influence. Students’ perception of influence during field studies decreases the longer students study in high school. This study confirms the findings of the two categories are unchanged, but with the help of field studies can Vallentuna gymnasium raise students’ stimulation and participation. The field studies must be well planned for the increased participation also will increase students' ability to influence.

In this thesis a number of problems concerning proper curvature collineations, proper Weyl collineations and projective vector fields will be considered. The work on the above areas can be summarised as: (i) A study of proper curvature collineations in plane symmetric static, spherically symmetric static and Bianchi type <I>I</I> spacetimes will be presented by considering the rank of their 6 x 6 Riemann tensors and using a theorem which eliminates those space-times where proper curvature collineations can not exist; (ii) A study of proper Weyl collineations is given by using the algebraic classification and associated rank of the Weyl tensor and using a theorem similar to that used in (i); (iii) A technique is developed to study projective vector fields in the Friedmann Robertson-Walker models and plane symmetric static spacetimes; (iv) The situations when conformally flat spacetimes admit proper curvature collineations are fully explored.

No description available.