Spelling suggestions: "subject:"mixed wind"" "subject:"mixed win""
1 |
Design and Development of 75 mm Fixed-Wing Nano Air VehiclePushpangathan, Jinraj V January 2017 (has links) (PDF)
This thesis deals with the design and development of a 75 mm fixed-wing nano-air vehicle (NAV). The NAV is designed to fit inside a cube with each side measuring 75 mm. The range and endurance of the NAV are 300 m and 2-3 minutes, respectively. The high-wing horizontal tailless NAV has a take-off weight of 19.5 g. The battery-powered single propeller NAV has two control surfaces in the form of elevator and rudder.
This thesis contains a detailed account of the airfoil selection, selection of the configuration of NAV and the longitudinal, lateral and directional aerodynamic characterization of the NAV. The development of one of the lightweight autopilot hardware which weighs 1.8 g is also given in detail. The development of non-linear equations of motion of NAV including thrust and coupling effects is also discussed. The effects of the gyroscopic coupling and counter torque on the linear dynamics of the NAV are analyzed by conducting a parametric study about the variation of the eigenstructure attributable to the varying degree of coupling in the system matrix of the linear coupled model.
A robust simultaneously stabilizing output feedback controller is synthesized for stabilizing the plants of the NAV. The synthesizing of the robust simultaneously stabilizing output feedback controller is based on a frequency-shaped central plant. A new procedure is developed to determine the frequency-shaped central plant utilizing the v-gap metric between the plants, the frequency-shaping of the plants with the pre and post compensators and the robust stabilization theory. An optimization problem is formulated to obtain these compensators. A novel iterative algorithm is developed to acquire the compensators by solving the optimization problem. Thereafter, an iterative algorithm is developed to find an output feedback controller for robust simultaneous stabilization by blending the existing features of robust stability condition of right co-prime uncertainty model of the frequency-shaped central plant, the maximum v-gap metric of the frequency-shaped central plant, H∞ loop-shaping and eigenstructure assignment algorithm for output feedback using the genetic algorithm. The six-degree-of-freedom numerical and hardware-in-loop simulations (HILS) of closed-loop non-linear and linear plants of NAV are performed to assess the performance of the controller and to validate the control algorithm implemented in the autopilot.
The airworthiness of the aircraft is tested by conducting flight trials in radio-controlled (RC) mode without including the autopilot. The successful RC flight trial of the NAV indicates airworthiness of the aircraft which aided in freezing the configuration. This is one of the smallest fixed wing aerial vehicle that was successfully flown till date.
|
2 |
Fault diagnosis of a Fixed Wing UAV Using Hardware and Analytical RedundancyAndersson, Michael January 2013 (has links)
In unmanned aerial systems an autopilot controls the vehicle without human interference. Modern autopilots use an inertial navigation system, GPS, magnetometers and barometers to estimate the orientation, position, and velocity of the aircraft. In order to make correct decisions the autopilot must rely on correct information from the sensors. Fault diagnosis can be used to detect possible faults in the technical system when they occur. One way to perform fault diagnosis is model based diagnosis, where observations of the system are compared with a mathematical model of the system. Model based diagnosis is a common technique in many technical applications since it does not require any additional hardware. Another way to perform fault diagnosis is hardware diagnosis, which can be performed if there exists hardware redundancy, i.e. a set of identical sensors measuring the same quantity in the system. The main contribution of this master thesis is a model based diagnosis system for a fixed wing UAV autopilot. The diagnosis system can detect faults in all sensors on the autopilot and isolate faults in vital sensors as the GPS, magnetometer, and barometers. This thesis also provides a hardware diagnosis system based on the redundancy obtained with three autopilots on a single airframe. The use of several autopilots introduces hardware redundancy in the system, since every autopilot has its own set of sensors. The hardware diagnosis system handles faults in the sensors and actuators on the autopilots with full isolability, but demands additional hardware in the UAV.
|
3 |
Radial basis functions for fluid-structure interpolation and mesh motion in aeroelastic simulationRendall, Thomas Christian Shuttleworth January 2008 (has links)
During aeroelastic simulation, forces and displacements must be interpolated between the non-matching fluid and structural meshes, while the volume fluid mesh must deform as the surface moves. Fluidstructure interpolation is necessary because numerical models for fluids and structures use different solvers, and at the interface these meshes do not match. The problem of mesh motion arises from the fact that the discretised fluid volume must conform to the motion of the surface, which means motion of the surface must be diffused into the volume.
|
4 |
Minimal Length Multi-Segment Clothoid Return Paths for Vehicles with Turn Rate ConstraintsTuttle, Theodore 16 September 2022 (has links)
No description available.
|
5 |
A State-based Approach for Modeling General Aviation Fixed-wing AccidentsNeelakshi Majumdar (5930741) 16 January 2019 (has links)
<p>General Aviation (GA) is a category of aircraft operations, exclusive of all military and commercial operations. According to Federal Aviation Administration (FAA), fixed-wing aircraft (also known as airplanes) account for 76.2% of all the estimated registered GA fleet in the United States. Out of all the GA accidents that the National Transportation Safety Board (NTSB) investigated in 2017, 87.7% of the accidents involved fixed-wing aircraft. The NTSB reports on all GA accidents and records the accident details in their database. The NTSB database has an abundance of accident data, but the data is not always logically complete and has missing information. Many researchers have conducted several studies to provide GA fixed-wing accident causation using the NTSB accident data. The quantitative analyses conducted by the researchers focused on a chain of events approach and identified the most frequent events in accidents. However, these studies provided little insight into why the events in the accidents happened. In contrast, the qualitative analyses conducted an in-depth study of limited accidents from the NTSB database. This approach helps in providing new findings but is difficult to apply to large scale datasets. Therefore, our understanding of GA fixed-wing accident causation is limited. This research uses a state-based approach, developed by Rao (2016), to provide a potentially better understanding of causes for GA fixed-wing accidents. I analyzed 10,500 fixed-wing accidents in 1982–2017 that involved inflight loss of control (LOC-I) using the state-based approach. I investigated the causes of LOC-I using both a conventional approach and a state-based approach. I analyzed fatal, non-fatal and overall LOC-I accidents in three timeframes: 1989–1998, 1999–2008 and 2008–2017. This multi-year analysis helped in discerning changes in the causation trends in the last three decades. A mapping of the LOC-I state definition to the NTSB codes helped in identifying 2350 more accidents in the database that were not discernible using the conventional approach. The conventional analysis revealed “directional control not maintained” as the top cause for the LOC-I accidents, which provides little information about how loss of control happened in accidents. The state-based analysis highlighted some important findings that contribute to LOC-I accidents that were not discernible using the conventional approach. The state-based analysis identified preflight mechanical issue as one of the new causes for LOC-I with a presence in 5.1% of LOC-I accidents in 2009–2017. It also helped in inferring some of the missing information in the accident data by modeling the accidents in a logical order. Using the logic rules in the state-based approach, I inferred that the pilot’s tendency to hit objects or terrain caused loss of control in 19.9% of LOC-I accidents in 2009–2017. Further, the logic rules helped in inferring that 7.5% of LOC-I accidents in 2009–2017 involved hazardous condition of an aircraft before the start of flight. A comparison of the findings from state-based approach with the GAJSC (General Aviation Joint Steering Committee) safety enhancements revealed that the state-based approach encompassed all the potential issues addressed in the safety enhancements. Additionally, a state-based analyses of larger datasets of fatal and non-fatal accidents suggested some new potential issues (such as improper maintenance) that were not explicitly addressed in the GAJSC safety enhancements. </p>
|
6 |
Analysis of an electric environmental control system to reduce the energy consumption of fixed-wing and rotary-wing aircraftVega Diaz, Rolando 10 1900 (has links)
Nowadays the aviation industry is playing an important role in our daily life, since is the main medium that satisfies the present human needs to reach long distances in the fastest way. But such benefit doesn’t come free of collateral consequences. It is estimated that each year, only the air transport industry produces 628 mega tonnes of CO2. Therefore, urgently actions need to be implemented considering that the current commercial fleet will be doubled by 2050. The research field for more efficient aircraft systems is a very constructive field; where novel ideas can be exploited towards the mitigation of the coming air transport development.
In this research the configuration of the Environmental Control System (ECS) has been analysed aiming to reduce its energy consumption for both, fixed-wing and rotary-wing aircraft. This goal is expected to be achieved mainly through the replacement of the main source of power that supplies the ECS, from pneumatic to electric. Differently from the conventional ECS, a new electric-source technology is integrated in the system configuration to compare its effects on the energy consumption. This new technology doesn’t bleed air directly from the engines; instead of that, it takes the air directly from the atmosphere through the implementation of an electric compressor. This new technology has been implemented by Boeing in one of its most recent airplanes, the B787.
Towards achieving the main goal, a framework integrated with five steps has been designed. An algorithmic analysis is integrated on the framework. The first step meets the required aircraft characteristics for the analysis. The second step is in charge of meeting the mission profile characteristics where the overall analysis will be carried out. The third step assesses the conventional ECS penalties. The fourth step carries out a complex analysis for the proposed electric ECS model, from its design up to its penalties assessment. The fifth step compares the analysis results for both, the conventional and the electric models.
The fourth step of the framework, which analyses the electric ECS, is considered the most critic one; therefore is divided in three main tasks. Firstly, a small parametric study is done to select an optimum configuration. This task is carried out towards meeting the ECS air conditioning requirements of a selected aircraft. Secondly, the cabin temperature and pressurization are simulated to analyse the response of the configured electric ECS for a mission profile. And finally, the fuel penalties are assessed in terms of system weight, drag and fuel due power-off take.
To achieve the framework results, a model which receives the name ELENA has been created using the tool Simulink®. This model contains 5 interconnected modules; each one reads a series of inputs to perform calculations and exchange information with other modules.
|
7 |
Meta aircraft flight dynamics and controlsMontalvo, Carlos 22 May 2014 (has links)
The field of mobile robotic systems has become a rich area of research and design. These systems can navigate difficult terrain using multiple actuators with conventional ambulation, by hopping, jumping, or for aerial vehicles, using flapping wings, propellers, or engines to maintain aerial flight. Unmanned Aerial Systems(UAS) have been used extensively in both military and civilian applications such as reconnaissance or search and rescue missions. For air vehicles, range and endurance is a crucial design parameter as it governs which missions can be performed by a particular vehicle. In addition, when considering the presence of external disturbances such as atmospheric winds, these missions can be even more challenging. Meta aircraft technologies is one area of research that can increase range and endurance by taking advantage of an increase in L/D. A meta aircraft is an aircraft composed of smaller individual aircraft connected together through a similar connection mechanism that can potentially transfer power, loads, or information. This dissertation examines meta aircraft flight dynamics and controls for a variety of different configurations. First, the dynamics of meta aircraft systems are explored with a focus on the changes in fundamental aircraft modes and flexible modes of the system. Specifically, when aircraft are connected, the fundamental modes change, can become overdamped or even unstable. In addition, connected aircraft exhibit complex flexible modes and mode shapes that change based on the parameters of the connection joint and the number of connected aircraft. Second, the connection dynamics are explored for meta aircraft where the vehicles are connected wing tip to wing tip using passive magnets with a particular focus on modeling the connection event between aircraft in a practical environment. It is found that a multi-stage connection control law with position and velocity feedback from GPS and connection point image feedback from a camera yields adequate connection performance in the presence of realistic sensor errors and atmospheric winds. Furthermore, atmosphericwinds with low frequency gusts at the intensity normally found in a realistic environment pose the most significant threat to the success of connection. The frequency content of the atmospheric disturbance is an
important variable to determine success of connection. Finally, the geometry of magnets that create the connection force field can alter connection rates. Finally, the performance of a generic meta aircraft system are explored. Using a simplified rigid body model to approximate any meta aircraft configuration, adequate connection is achieved in the presence of realistic winds. Using this controller overall performance is studied. In winds, there is an overall decrease in outer loop performance for meta aircraft. However, inner loop performance increases for meta aircraft. In addition, the aerodynamic benefit of different configurations are investigated. Wing to wing tip connected flight provides the most benefit in terms of average increased Lift to Drag ratio while tip to tail configurations drop the Lift to Drag ratio as trailing aircraft fly in the downwash of the leading aircraft.
|
8 |
Automatic Takeoff and Landing of Unmanned Fixed Wing Aircrafts : A Systems Engineering ApproachMagnus, Vestergren January 2016 (has links)
The purpose of this thesis is to extend an existing autopilot with automatic takeoff and landing algorithms for small fixed wing unmanned aircrafts. The work has been done from a systems engineering perspective and as for solution candidates this thesis has a bias towards solutions utilizing fuzzy logic. The coveted promises of fuzzy logic was primarily the idea to have a design that was easily tunable with very little knowledge beyond flight experience for a particular aircraft. The systems engineering perspective provided a way to structure and reason about the project where the problem has been decoupled from different solutions and the work has been divided in a way that would allow multiple aspects of the project to be pursued simultaneously. Though the fuzzy logic controllers delivered functional solutions the promises related to ease of tuning was not fulfilled in a landing context. This might have been a consequence of the designs attempted but in the end a simpler solution outperformed the implemented fuzzy logic controllers. Takeoff did not present the same issues in tuning but did require some special care to handle the initial low airspeeds in an hand launch.
|
9 |
Analytical approach to multi-objective joint inference control for fixed wing unmanned aerial vehiclesCasey, Julian L. 15 December 2020 (has links)
No description available.
|
10 |
BLAND : Autopilotfunktion för ballistisk landning med fastvingedrönare / BLAND : Autopilot functionality for ballistic landing with fixed-wing dronesHögstedt, Martin, Sörnäs, Gustav, Kung, Johannes, Hellstrand, Axel, Hammarberg, Axel, Hörnberg, Elias, Altaweel, Jubran, Isaksson, Rosanna, Svärd Gruvell, Albin January 2023 (has links)
Med målet att landa fastvingedrönare på en liten yta utfördes ett projekt som implementerade en ballistisk landning i simulation. Projektet utfördes på initiativ av Sjöräddningssällskapet som har utvecklat en fastvingedrönare som behöver kunna landa på en båt. Projektet var en del av ett kandidatarbete inom ämnet programvaruteknik med syfte attbesvara hur landningen kunde skapa värde för kunden, vilka erfarenheter för framtidensom projektgruppen kunde dokumentera och vilket stöd projektgruppen fick från att använda en systemanatomi. För att besvara frågeställningarna utarbetade projektgruppen en kravspecifikation och ensystemanatomi samt utförde projektet med kontinuerliga utvärderingar under projektetsgång. Vid utvecklingen användes en variant av Scrum. Som resultat implementerades engrundläggande version av en ballistisk landning. Dokument skapades för utvecklingenoch gemensamma erfarenheter samlades in genom utvärderingar och möten. Projektgruppen fick många lärdomar om att arbeta i och planera större projekt vilket diskuteras i rapporten. Projektet och den utvecklade landningens hållbarhetsaspekter utvärderades.
|
Page generated in 0.0632 seconds