The diploma thesis deals with the design of the new building of the winery with the possibility of accommodation near of Klentnice. The building consists of four parts. The first is the production where grapes are degraded, fermented, pressed, stored, bottled, labeled and subsequently exported. The second is the administrative part where are three offices. The third is a tasting section overlooking the vineyards. The last one is the accommodation with a capacity of 7 rooms. The building is basement and has two floors.

The diploma thesis deals with a project of a new multifunctional building in Pelhřimov. The object is composed by four above-ground and one underground floor. Commercial premises are located on the first above-ground floor. These premises consist of a travel agency, bakery, bookshop and sports outfitters. Two individual administrative premises can be found on the second floor. Eight flats were designed on the third and the fourth above-ground floor. On each of these floors, there are four flats; two of them were designed as two-bedroom and two of them as three-bedroom flat. A common area and a row garage can be found on the underground floor. The construction system of the object is a combination of reinforced concrete frame and a masonry system. The object is roofed with a warm flat roof with a typical sequence of layers.

The intention of my diploma´s thesis was project of new building of wellness hotel located in the cadaster unit of village Horní Bečva. Plot for this building was chosen mild slope. Numbers of these plots are 764/1 and 769/1. Besides of hotel structure, there will be a structure of parking with 26 parking spots. Hotel will offer opportunity for all-seasons accomodation. Hotel guests will be able to visit wellness situated in the 4th floor and restaurant situated in the 1st floor. Restaurant will be allowed also for an external guests. Location for placement of this new building is suitable for this type of building. The hotel is solved as four-storey building. The external and internal loadbearing masonry are created from sand-lime brick of system KM BETA SENDWIX. The floor structures are created as cast-in-place reinforced concrete floors. The building has contact thermal insulation system ETICS. The diploma’s thesis has the form of design documentation for the building process.

The subject of this diploma thesis is the design and development of project documentation for the construction of a new building of the multifunctional house Domamyslice. The object will be located in the city of Prostějov in part Domamyslice. The new building will be divided into three separate functional units – restaurant with pizzeria, offices and residential area. It is a four-storey, partially basement multifunctional house with a flat roof based on concrete foundation strips. The structural system is designed in a wall of the ceramic blocks with ceramic ceilings. The windows will be plastic with viewing aluminium profiles. The new building has 40 parking places on the investor’s land. The diploma thesis is processed with the valid standards, laws and decrees of the Czech Republic in the current version.

The goal of this thesis is to create a design documentation for a kindergarten. This building is situated in the city called Brtnice – more specifically in its newly established location Nová Čtvrť. The kindergarten has two floors. Walls of the first one are partly sunken under the surface level. Each floor is divided into an operating section and part for a preschool education. The building has a foundation made of plain concrete bands, built from an aerated concrete and has a flat roof. Following building project puts an emphasis on a spatial and architectonical layout, energy savings and overall safety.

The diploma thesis deals with the design and elaboration process of project documentation of newly-built multi-purpose building in Sturovo. The building is designed as a three-storey building with a partial fourth storey. A footprint of the building is created by the irregular shape of the letter „L“ with an angle of 110 °. The building is roofed with a warm flat roof. The roof above the third storey is designed as a walkable flat roof divided in a green roof part and part with concrete paving. Spatial zoning of the building consists of three main spaces. There is a bookstore zone and coffee shop situated on the ground floor. The second and third floor is designed for administrative spaces. Premises of the second floor are designed as an activity-based office with open spaces. Third floor focus on closed offices. The meeting rooms, chill-out zones, break rooms with kitchenettes are available in both of them. Technical facilities and utility rooms are situated also on the ground floor. There is a room with kitchenette, storage rooms and utility rooms in the fourth ground. Public zones of building and administrative zones are accessible. The structural system of a building is designed as a cast-in-place reinforced concrete frame in a combination with a shear core. Ceilings consist of cast-in-place beam-supported reinforced concrete one-way slab. The structure is based on foundation pads and strip foundations. infill wall is made of vertically perforated blocks. Exterior walls and insulated with ventilated facades system.

In my diploma thesis I elaborated a project for realization of the building. Its content is a home for the elderly, which is a three-storey building, where the first floor is designed as an operating section with a doctor's surgery, a medical equipment rental and a dining room with a kitchen. The remaining two above-ground floors are designed as 1 + KK or 1 + 1 flats. Each balcony is designed for each apartment. Further, there are nurses on these floors. The building is designed as brickwork made of brick blocks with additional mineral insulation thermal insulation, the roof structure being solved using pre-prestressed concrete reinforced concrete panels Spiroll. The roof is designed from flat sloping wedges.

The topic of this thesis is a project documentation of a Nursery School located in Trencin part Juh. The object had been designed as a stand-alone three storey building. The topic of this thesis is a project documentation of a nursery school located in Trencin quarter - Juh. The object has been designed as a stand-alone three storey building with two above- and one under-ground floors. Nursery school consists of two separate classrooms for kids, part for operations and employees, two creative areas, basement with storage space and garden. Only basic food is going to be prepared directly in the building, main courses will be brought by external provider and warmed up. A combined wall construction system made of Porotherm 30 Profi bricks and one reinforced concrete pillar have been used. In the basement the walls are constructed using permanent shuttering filled with concrete. Ceilings are of reinforced concrete. The object is founded on foundation stripes. The roof is then designed as one-shell flat with standard order of all layers. Above the 2nd floor the roof is projected as walk able , in the eastern part above the 1st floor as walk able with concrete paving on the rectification pads and above western part of the 1st floor it is designed as green vegetation roof. The access road to the object leads to the northern side of the building. In the eastern part of the estate an independent parking lot for parents is located, in the western part then one for employees and supplying. The southern part of the object is occupied by garden with projected area for playing and stay of the kids outside.

Object of presented dissertation is proposition of apartment building. Apartment building is based on wood technology with two stages without cellar and with flat roof. Block of flats is designed with 8 flats. Some of them with big terrace. Object is situated in Olomouc, Czech Republic.

Diploma thesis deals with structural design of new building for retirement people in Rychnov nad Kněžnou. The building has three floors with partial basement. There are nursing spaces, dining room with kitchen, chemist´s shop, surgery, hairdresser´s, pedicure and massage on the first floor. The second floor is used for accomodation, nursing services and there is terrace. The third floor is used for accomodation and social activities. The technical facilities, storage spaces and bicycle rooms are in basement. The structural masonry system is with Ytong blocks. The building has warm flat roof.