The diploma thesis deals with the proposal of a new guesthouse with a restaurant. The building is located in a slightly sloping terrain in the cadastral area of the village Vlasatice Brno-venkov in the South Moravian Region in the Czech Republic. The ground-plan shape of the building is mostly rectangular with folded facade parts. It is a partially basement building, to a lesser extent, recessed below ground level with three above-ground floors. The pension has a total of 22 rooms with a total capacity of 46 persons for short-term accommodation. Four rooms on the first floor are designed as wheelchair accessible. For the proper operation of the pension there is a reception on the first floor and an office with the appropriate meeting room on the second floor. One-storey part of the building consists of a restaurant with a capacity of 76 persons, which is designed as a frame skeleton with intensive vegetation single-skin flat roof. The preparation and meals and service of the restaurant is ensured by the kitchen together with its operations and respective warehouses located on the first floor. The basement is used primarily for the operation of the guesthouse, which is located air-conditioning engine room, utility room, workshop or warehouse. The building is for the most part bricked and the peripheral, internal bearing or partition walls are made of polished ceramic blocks porotherm. External walls are insulated with contact insulation system ETICS of gray EPS polystyrene. The glazed Schüco façade is used as the shell of the skeleton structure. The construction of the ceiling is composed of filigree ceiling panels and a singlelayer flat roof with a slope of 3% is used for roofing the building. The thesis contains project documentation for the realization of the construction.

The subject of the master thesis is a new hotel building. The hotel is a three-storey, non-basement building with a flat roof, which serves for temporary accommodation for 42 guests. On the first floor is a restaurant with all necessary facilities for guests and staff, lobby with a reception and a small shop. The other two floors are designed to accommodate guests. The hotel is based on foundation passports. The vertical load-bearing structures are made of ground brick blocks. They are insulated by contact insulation system ETICS. Horizontal structures are made of prestressed ceiling panels. Part of the master thesis is thermal engineering assessment, fire safety solutions and assessment in terms of acoustics and daylight. The master thesis contains a drawings and technical documentation.

The subject of the master's thesis is elaboration of the complete project design documentation of a administrative building, ready for implementation in the construction phase. The object is divided into four above-ground floors and one underground floor. It is divided into three blocks A, B, K and into three independent functional units. The prevailing part of building is administrative part, which is located in blocks A and B. In the basement there is a compound garage. Part of the building comprises of a service, a café, located and operated on the first floor above ground in block K. The individual blocks have separate entries and are without any mutal limitation to their independent operations. The building has a carrier system designed as a monolithic, reinforced concrete skeleton with two reinforced cores, placed on reinforced concrete feet. Ceramic fittings are slated for filling . The roof structure designed as a single-shell flat roof area, eventually vegetative. The facade is designed as ventilated with cement-bonded particle boards. Within the specialization is the solution of technical equipment, forced ventilation by means of air-conditioning system.

The diploma thesis deals with the project of the sports center with restaurant in the town of Semily. The designed object is located near to the town center in sports area. The surrouding terrain is flat. The building consist of four interconnected parts (including the basement) with the flat roof. The object is divided to three main part. Every single floor is rectangular shape, but different dimension. In basement is technical and storage room. In ground floor is a restaurant with support areas and bowling lanes. Upper floor is used like loocker room and washroom and in the top floor are excercise halls. Groung floor is accessible from south where is situated terrace, is passage through direct to newly built outdoor swiming pool. The part of diploma thesis is urban study of town Semily.

The aim of the Master thesis is to design a new building of winery in Drnholec in Výsluní street located on plot No. 1643/81. It is a sloping plot with total area 18 158 m2. The building has two above-ground floors and a basement. In the basement there is a vertical load-bearing structure consists of cast-in-place reinforced conrete and in the above-ground floor there are sand-lime blocks. A horizontal load-bearing structure are design from prestressed panel Spiroll. There is designed a green warm flat roof. This complex of winery is divided into four independently functional operation: wine production, administrative part, accommodation and tasting room with retail. In the basement there is situated wine production with technical facilities. In the ground floor there is a separate area with tasting room and its support area, further there is a part of wine production, retail, office and staff facilities. In the first floor there is accommodation. The design of the building emphasizes the architectural character and the building also meets the energy requirements in full. The shape solution is designed so that the object fits into the vineyard environment.

The diploma thesis deals with a new building of a single-storey production object, which is made as a precast concrete frame with a lightweight cladding. Part of the new building is also facilities for employees and its administrative staff, which is also based on precast concrete frame divided into two floors. Cladding is made as masonry with ventilated facade. The internal division of buildings is made by plasterboard partitions. The project is located in the industrial zone Košíkov near Velká Bíteš.

The diploma thesis deals with the study of runoff torrential rain on the green roofing. This work is focused the problematics of runoff for various constructions of flat and green roofing. The results were evaluated according to the standard ČSN 75 67 60 - Internal sewerage and the German standart for green roofing FLL.

The aim of the Diploma thesis is elaboration of design documentation for execution of an multifunkcional building.It is a building with four above ground floors and one partly under-ground floor. In the underground floor, individual garages are designed. The entrance is on the first floor, where there are also business premises. Office space is located on the second floor, and flats are placed on the third and fourth floors. The roof above the 4th floor is designed as flat roof. The underground part of the building and some other structures are designed from concrete. The other load-bearing masonry is made of ceramic blocks. The partitions are made of plasterboard or ceramic fittings. The shafts are also made of plasterboard. The ETICS system is used on the facade. The ceiling structures are monolithic reinforced concrete slabs. The roof is made as an extensive green roof.

New building pension with brewery is situadet in town Prostejov. Object has 3 overground floors and flat roof, it has no cellar. On ground floor is situated the brewery, medium large kitchen with storages, sanitary and the restaurant. Kitchen is designed for preparing 150 meals, capacity of restaurant on the ground floor is 81 place and on the galery is 70 . On this floor has been situated room for invalids also. On the further floors are rooms for guests and technical area for air design system.

New building of hotel with restaurant, divided into two objects, single-storey administrative part with restaurant and hotel hinterland and three-storey accommodation tract. Building is without basement and foundations are on reinforced concrete foundation strips. Bearing walls are made of Porotherm brickwork, horizontal structures are also made of Porotherm brickwork. Both objects has flat roof.