Thesis elaborates project documentation for new residential building in Prague 8 - Karlín. The building has five floors without a basement. In 1.NP are located collective garages for cars, garage - parking for bicycles and motorcycles, a cellar for residential units and the main entrances to the building. 2.NP - 5.NP is reserved for housing. The apartment building has three types of units with different layout arrangement - 2 + kk, 3 + kk, 4 + kk and one unit for persons with disabilities. Each apartment has its own entrance to the balcony. Inputs to the roof are placed above the 5th floor Foundations are designed as footings under reinforced concrete columns with a combination of the base plate. The building is in 1.NP reinforced concrete combined with brick infills. 2.NP - 5.NP is brick. The roof is designed flat.

Diploma thesis „Sport centre“ is made as a project documentation. The designed building structure is detached on a plane terrain in Lipník nad Bečvou. It has two floors and a basement. This building construction is based on the footings. The load-bearing walls are bricked up by Porotherm blocks. The ceilings are made up of panels Spiroll and PZD. The roof construction is designed as a single-flat. In building is squash, dance hall, gym, spinning, massages, snack bar and bowling with two lanes. Car park is next to the building.

The subject of this thesis is the design and static assessment of timber load bearing structure of The Multipurpose buildings in Podlesí u Příbram. The complex is composed of the administrative building and a multipurpose hall and corridor. The administrative building has three floors and it is designed as a wooden frame. The hall is designed as a wooden frame system. Corridor connects the administrative building with a hall and it is 1.3 meters above the ground. Corridor is a wooden structure. Climatic loads are considered for the village Podlesí u Příbram.

The master’s thesis deals with the project documentation of a flat building with sweet-shop in Brno - Štýřice. The object is designed as a detached building without basement with four floors. Floor plan of the building is L-shaped, fitted into the equal terrain. In the first floor is a sweet-shop, cellar, stroller storage, waste storage and two flat units. In the other floors are flat units. The structural system is bricks, two-way. The building is covered with a flat roof.

Diploma thesis, that cover project documentation of building part of the new build museum of motosport. The object include two above grand floors without basement. Ground plan consist of four mutually adjacent rectangles. On the first floor is an exhibicion space of the museum. Second floor provides space for the administrative part of museum. The building is covered with a flat green roof and is designed as a reinforced concrete skeleton. The facade is composed of the curtaim wall

The diploma thesis is a project of two-storied kindergarten in Presov. The facility is designed for four departments with a total capacity of 80 children and a separate kitchen. Building plot is situated on the outskirts of settlements in the Construction area in a stable area and the master plan is intended for civic amenities. The vertical support structures are designed from sand-lime bricks. Floor structures are designed from prestressed reinforced concrete hollow core slabs. The roof is designed as a flat, green roof. The façade is ventilated and lined with tiles of cement and particle boards.

Subject of the project is new building of medical equipment with institutional care for seniors. Building is located in Brno, in city part Brno-centre. Objective was to elaborate the project documentation for realization of the medical equipment with institutional care. Capacity of the equipment is maximum 28 patients. Building is situated in sloping terrain. Building has three aboveground floors and one underground floor. Bed part is designed as the masonry construction; dining part is the skeletal construction. Skeletal construction consists of reinforced concrete prefabricated panels; bricked part is of the type system THERM. Both parts are thermally insulated. The roof is designed as the flat single-layer structure.

Diploma thesis is focused on design and elaboration of detailed design of polyfunctional building by Střelice, Brno-venkov the parcel number5804/4 and 5804/5. Proposition of the object respects both commune plan and current street buildings. It‘s not supposed to create stress with its shape and size, but complete actual buildings. It has four elevated floors, one basement and flat roof. Building has commercial space, mass garage and flats, it‘s determinate for study purpose.

The subject of the diploma thesis is a new-built home for the seniors in the village Vyškov. The building is designed on a slightly sloping terrain. The main entrance is oriented to the northeast. It consists of one building divided into three expansion units. It is a building with a partial basement floor and three floors. The building is designed from reinforced concrete frame with masonry infill Porotherm. The ceiling structure is designed from a continuous cross -reinforced monolithic reinforced concrete slabs. The building is covered with a flat roof. House is designed for desabled persons.

Diploma thesis is focused on design and elaboration of detailed design of multifuncional object in Mikulov na Morave, the parcel number 6905, 6910 and 6919. Proposition of the object respects both commune plan and current street buildings. It‘s not supposed to create stress with its shape and size, but complete actual buildings. It has three elevated floors, one basement and mono - pitched roof. Object has laboratories, offices and conference room, it‘s determinate for study purpose.