1 |
Ground Reaction Force Prediction during Weighted Leg Press and Weighted Squat in a Flywheel Exercise Device / Estimering av markreaktionskraften vid viktad benpress och viktad knäböj i ett svänghjulsbaserat träningsredskapMunkhammar, Tobias January 2017 (has links)
When performing a biomechanical analysis of human movement, knowledge about the ground reaction force (GRF) is necessary to compute forces and moments within joints. This is important when analysing a movement and its effect on the human body. To obtain knowledge about the GRF, the gold standard is to use force plates which directly measure all three components of the GRF (mediolateral, anteroposterior and normal). However, force plates are heavy, clunky and expensive, setting constraints on possible experimental setups, which make it desirable to exclude them and instead use a predictive method to obtain the full GRF. Several predictive methods exist. The node model is a GRF predictive method included in a musculoskeletal modeling software. The tool use motion capture and virtual actuators to predict all three GRF components. However, this model has not yet been validated during weighted leg press and weighted squat. Furthermore, the normal component of the GRF can be measured continuously during the activity with pressure sensitive insoles (PSIs), which might provide better accuracy of the GRF prediction. The objectives of this thesis were to investigate whether force plates can be exluded during weighted leg press and weighted squat and to investigate whether PSIs can improve the GRF prediction. To investigate this, the node model and a developed shear model was validated. The shear model computes the two shear GRF components based on data from PSIs, an external load acting upon the body and data from a motion capture system. Both the node model and the shear model were analysed with two test subjects performing two successive repetitions of both weighted squat and weighted leg press in a flywheel exercise device. During the leg press exercise, the node model had a mean coeffcient of correlation (Pearson's) ranging from 0.70 to 0.98 for all three directions with a mean root mean square error ranging between 8 % to 20 % of the test person's body weight. The developed shear model had a coeffcient of correlation (Pearson's) between 0.64 to 0.99 and a mean root mean square error between 3 % and 21 % of the test person's body weight. This indicates that it is possible to exclude force plates and instead predict the GRF during weighted leg press. During squat, neither the node model nor the shear model provided accurate results regarding the mediolateral and anteroposterior components of the GRF, suggesting that force plates can not yet be excluded to obtain the full GRF during weighted squat. The results of the normal component during leg press was somewhat improved with the shear model compared to the node model, indicating that using PSIs can improve the results to some extent.
|
2 |
Biomechanical Simulations of a Flywheel Exercise Device in Microgravity / Biomekaniska simuleringar av resistansgivande svänghjulsbaserad träningsutrustning i tyngdlöshetJönsson, Maria, Boije, Malin January 2015 (has links)
Bone loss and muscle atrophy are two main physiological conditions affecting astronauts while being in space. In order to counteract the effects, at least two hours of aerobic and resistant countermeasure exercise is scheduled into their working day, seven days a week. Yoyo Technology AB has developed a resistance exercise device based on the flywheel principle, providing a load independent of gravity. However, there is no biomechanical research done on the efficiency of the device in microgravity, from a human movement point of view using simulation software. The aim of this thesis was to evaluate the effects of performing a leg press on the flywheel exercise device in a microgravity environment. Simulations of performing a flywheel leg press in earth gravity, microgravity and performing a conventional squat were done. The evaluated parameters were reaction forces, joint angles, joint moments, joint powers and muscle recruitment in the lower extremities. The simulations were done using a biomechanical simulation software based on a motion capture data collection. From the results two conclusions were proposed. Performing a flywheel leg press in microgravity environment or on earth provides at least as much peak moment as a body weighted squat performed on earth. Furthermore, performing a flywheel leg press in microgravity will induce a higher activity level among hip extensors and knee flexors compared to performing a flywheel leg press on earth.
|
Page generated in 0.0642 seconds