Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.

The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.

The content of this thesis is the design layout and construction of the building of new fire station in South Moravian Region. It is an object split into two interconnected parts: administrative - two-storey, basementless garage for trucks - single-storey, basementless The object is used to perform the services of eight firefighters per shift and one full-time worker. Architecture was chosen so that the object is functionally meet the requirements of firefighters on duty at both organizational (work on PS) and at the operational (exit) procedure. The building is covered with a flat roof, attic walled building on the peripheral wall with white facade and symbols accentuating the purpose of the building. The inner workings of the object are designed to meet the performance demands of service 24ti - hour shifts. The building is brick, based on the footings and load distribution base. The roof structure is made of reinforced concrete load-bearing concrete slab with heat-waterproofing layers classical arrangement of layers. The building is insulated ETICS. This - the operational part is located on the 1st and 2nd floor of the south-western part of the building, single-storey garage built for trucks in the northeastern part.

This diploma thesis deals with the processing of project documentation of student housing in the city of Olomouc. The building is located near the university dormitory accommodation of Palacky University. It is designed to complement the missing type of accommodation. Building is a L-shaped five-storey, without a basement and with a flat roof. Structural system is mostly brick, only part of first floor is solved by columns. The building is divided into three building complexes. Two wings for the accommodation have 4 floors. The connector block has five floors, where the 5th floor is only the engine room. Foundation structures are concrete strips and foundation pads. South side of the building is protected from the sun by sunscreens, on which in a future could be installed photovoltaics. The building is divided into three parts in terms of functionality. 1.NP consists of commercial premises in the southern block and private rooms for accommodated in the eastern block. 2nd-4th floor forms spaces designed to accommodate students. Accommodation capacity is 105 people.

The subject of the diploma thesis is the processing of project documentation for the construction of wellness pension. This building is designed in a medium sloping terrain on the edge part of the Rajhrad city. The building has 3 floors and garage in the basement. Object is divided into 2 parts, the first part consists a restaurant and 2 floors for temporary accommodation in 14 rooms for 45 customers. The second part consists wellness for accommodated and also for other outside customers. The roof is designed single skin with vegetation area (extensive). The project includes a solution of paved areas and access to the underground garage, fencing, water connection, sewage connection, rainwater conection including a retention tank and overflow into the rainwater sewerage. The construction system of the building is based on reinforced concrete footings connected to foundation strips in the places of the cladding, follow up reinforced concrete columns. The ceiling structures, including hidden girders and stairs, are made of monolithic, reinforced concrete. Vertical load-bearing structures are designed from POROTHERM ceramic blocks. The vertical structures of the basement are designed from lost formwork. The building's ventilation system is divided into four parts, the first part is for wellness, the second part is for restaurant and pension, third part is for kitchen, last part is for fire protected escape route.

This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.

This master's thesis focuses on design and elaboration of documentation for construction of a Car Showroom. The building is divided to two functional parts. The building is to be situated on plot number 1333/21, cadastre unit: Bohunice. The building is to be located on an undeveloped plot in possesion of the investor. The parking lots are connected to a local road. All substantial infrastructures are located nearby the plot. The proposition and the design of the building have respect for both commune plan and current buildings. The documentation is elaborated with regard to the contemporary Czech legislative and standards. The project designs the building, which is divided in two functional parts: SO 01 & SO 02, both operationally and visually connected. Contructions of objects are structurally independent. The first object includes exhibition hall with capacity of 8 exhibited cars. There is also to be located the administrative part, waiting rooms for customers, facilities for employees and the warehouse. The second object includes car repair shop. There are also to be located facilities for employees of the service, workshop, room for a car handover, hand car wash and an utility room. Construction is designed as a reinforced concrete columnar structural system with prefabricated single footings, self-supporting foundation slab and reinforced concrete ceiling slab with integrated girders above first floor of the object SO 01. The roofs of the building are designed as a flat roofs and the support constructions are made of steel. Planned dimensions of autosalon are 41x18 metres. As a cladding of the first object is used the lightweight glass cladding. For masonry walls are used the 250 mm thick ceramic blocks, mineral insulation and ventilated external facade cladding with use of fiber-cement boards. Planned dimensions of car repair shop are 31x28 metres. As a cladding of the second object are used the sandwich panels with foam core made of PIR.

This diploma thesis describes the design and processing of project documentation pension. The proposed facility is located in the village of Železná Ruda- Pamferova Hut. The site is widely used by tourists in winter and summer. This is partly basement building, which has 2 storeys and an attic. The roof is designed as a gabled dormer with a flat roof. The building is based on the footings of plain concrete and under the reinforced concrete pillars are designed shoe. Supporting, peripheral and partition walls are designed from sand-lime bricks SENDWIX. An exception is peripheral walls of the basement, which is in contact with soil, which is designed as a lost formwork. In the dining area, which has an open reinforced concrete columns. Ceiling structure will consist of prestressed ceiling panels SPIROLL. Perimeter walls are insulated using external thermal insulation composite system using insulation from stone wool. The building is functionally divided into three main parts with a common main entrance. The first part is a restaurant with a kitchen, storage and kitchen facilities. This section is designed restaurants with a total capacity of 26 persons, the capacity will be in the summer to expand the possible capacity of the terrace, which belongs to the dining room. It is also proposed sanitary facilities for visitors to the restaurant, kitchen with storage and facilities for staff. The second part is the wellness center, which consists of a gym and rooms with infrared sauna and whirlpool. This section is designed sanitary facilities for visitors separated for men and women. The last part of the pension, which used to accommodate 30 people and the background of the pension. Backgrounds pension means any technical equipment room, storage room for bikes and skis, and not least the individual room house, which also includes a room for personal hygiene. This thesis was created with an emphasis on a correct layout and architectural design, static requirements an

Thesis on "Planetarium with coffee" is processed in the form of project documentation for construction. The proposed facility is designed as a two-storeyed without basement with the main ground plan dimensions of 52,8 x 27,47 m and is located near the village Lošov close to Olomouc. The building is operationally divided into a part intended for public entrance and a part for operation and maintenance. Loadbearing structural system is reinforced concrete monolithic skeleton based on monolithic reinforced concrete foundation footings. Ceiling structure consists of reinforced concrete, monolithic, locally supported, cross reinforced floor slab. Vertical external walls are made of ceramic blocks with contact thermal insulation system. Part of the front rounded facade is designed as glass fronted. The building is covered by a warm flat roof. Roof cladding consists of vegetation layers, walkable terrace or non-walkable structure of roof cladding. The planetarium itself is covered by a reinforced concrete dome with a thermal insulation layer of plates of foamed glass. Fillings of doors and windows are made of aluminum profiles with isolating triple glazing. The building meets the requirements for barrier-free use of buildings.

The topic of the master thesis is new medico-social facility hospice St. Michaela. The purpose of the object is the maximizing of improvement in the quality of life of dying, severely ill and incurable patients, with the use of palliative care. The construction follows the Complex of Regional Hospital Náchod. Together with as a retirement home Náchod completes a support network of health and social care. The building is designed as a four-building storey and is partially embedded into the sloping terrain. Floors are divided into individual facilities and together constitute a functional unit. In the basement is the technical room, warehouses, garages and kitchen facilities. On the ground floor are then socio-public rooms and facilities. On the second floor is located hedmaster of hospice and accommodation area. The third floor is devoted to the accommodation area. The proposed structure made of brick longitudinal system, supplemented by concrete basement walls. The horizontal structure is made of filigree ceiling panels. Stairs are designed as a precast concrete and steel. Individual roof structures is made from unwalkable, walkable and vegetation compositions. The cladding consists of ventilated facade of glass and wooden panels. Foundations are designed from the lineal foundation.