Thanks to development of power semiconductor devices and integrated circuits, active front-end converters with controllability of bidirectional power flow have become popular and viable in industrial applications. This thesis proposes an improved resonant current control for the active front-end converter with LCL filter. The proposed control consists of a band-pass filter tuned at fundamental frequency and various band-rejected filters resonant at harmonic frequencies to provide fundamental current tracking capability as well as enhance harmonic current rejection. Based on this algorithm, the active front-end converter can control dc voltage with unity power factor by sensing converter output current, LCL filter voltage and dc voltage. This approach also conducts harmonic current rejection under distorted line voltage with no phase-locked-loop used, which is the significant advantage in terms of phase lag of frame transformation and computing effort of digital signal processing. Current tracking performance and harmonic rejection capability of the proposed method are verified based on frequency-domain analysis. Computer simulations and experimental results are also implemented to validate effectiveness.

Pulse power system is widely used for medical, industrial and military applications. The operational principle of the pulse power system is that the energy from the input source is stored in the capacitor bank or superconducting inductive device through a dc-dc converter. Then, when a discharging signal exists, the stored energy is released to the load through pulse forming network (PFN) generating high peak power pulse up to gigawatts within several tens of or hundreds of microseconds. The pulse power system has been originally developed for the defense application. After the format of the voltage compression and voltage addition stages for the short-pulse high power acceleration has been established, it has been evolved to be common. Then, its application has been extended to food processing, medical equipment sterilization and wastewater treatment since many present environmental problems have been known in the early 70's or even earlier. In addition, the pulse power system is newly spotlighted due to the recent world events. The application examples are to treat anthrax-contaminated mail, and the use of accelerators to produce high power X-rays for security screening. Furthermore, the pulse power system has been applied for the tactical weapon system such as electrothermal-chemical (ETC) gun, coilgun and active armor system. Because the pulse power system applied for the tactical weapon system has the potential to be integrated in the military vehicle, a compact, lightweight pulse power system is strongly required for the future weapon system. In this thesis, a distributed power system (DPS) for the capacitor charger is introduced for the application of the active armor system. Furthermore, a design methodology is presented for the front-end converter to achieve the high efficiency as well as the high power density. Design parameters are identified and their impact on the design result is studied. the optimal operating point is determined based on the loss comparison between different operating points. In order to further improve the power density utilizing the unique operation mode i.e. pulse power operation, transformer design using amorphous-based core is provided and the design result is compared with that using ferrite-based core. A 5 kW prototype converter is built up and the experimentation is performed to verify the design. / Master of Science

The dissertation presents a generalized average-current-mode control technique (GACMC), which is an extension of the average-current-mode control (ACMC) for single-phase ac-dc boost converters with power factor correction (PFC). Traditional ACMC is generalized in a sense that it offers improved performance in the form of significant reduction of the current control loop bandwidth requirement for a given line frequency in unidirectional and bidirectional boost PFC converters, and additional functionality in the form of reactive power control capability in bidirectional converters. These features allow using a relatively low switching frequency and slow-switching power devices such as insulated-gate bipolar transistors (IGBTs) in boost PFC converters, including those designed for higher ac line frequencies such as in aircraft power systems (360–800 Hz). In bidirectional boost PFC converters, including multilevel topologies, the GACMC offers a capability to supply a prescribed amount of reactive power (with leading or lagging current) independently of the dc load power, which allows the converter to be used as a static reactive power compensator in the power system. A closed-loop dynamic model for the current control loop of the boost PFC converter with the ACMC has been developed. The model explains the structure of the converter input admittance, the current phase lead phenomenon, and lays the groundwork for development of the GACMC. The leading phase admittance cancellation (LPAC) principle has been proposed to completely eliminate the current phase lead phenomenon and, consequently, the zero-crossing distortion in unidirectional converters. The LPAC technique has been adapted for active compensation of the input filter capacitor current in bidirectional boost PFC converters. The dynamic model of the current control loop for bidirectional boost PFC converters was augmented to include a reactive power controller. The proposed control strategy enables the converter to process reactive power and, thus, be used as a reactive power compensator, independently of the converter operation as an ac-dc converter. Multiple realizations of the reactive power controller have been identified and examined in a systematic way, along with their merits and limitations, including susceptibility to the ac line noise. Frequency response characteristics of reactive elements emulated by means of these realizations have been described. Theoretical principles and practical solutions developed in this dissertation have been experimentally verified using unidirectional and bidirectional converter prototypes. Experimental results demonstrated validity of the theory and proposed practical implementations of the GACMC. / Ph. D.

With the development of information technology, the market for power management of telecom and computing equipment keeps increasing. Distributed power systems are widely adopted in the telecom and computing applications for the reason of high performance and high reliability. Recently industry brought out aggressively high efficiency requirements for a wide load range for power management in telecom and computing equipment. High efficiency over a wide load range is now a requirement. On the other hand, power density is still a big challenge for front-end AC/DC converters. For DPS systems, front-end AC/DC converters are under the pressure of continuous increasing power density requirement. Although increasing switching frequency can dramatically reduce the passive component size, its effectiveness is limited by the converter efficiency and thermal management. Technologies to further increase the power density without compromising the efficiency need to be studied. The industry today is also at the beginning of transferring their design from analog control to full digital control strategy. Although issues are still exist, reducing components count, reducing the development cycle time, increasing the reliability, enhancing the circuit noise immunity and reducing the cost, all of these benefits indicate a great potential of the digital control. This thesis is focusing on how to improve the efficiency and power density by taking the advantages of the digital control. A novel Ï /2 phase shift two Channel interleaving PFC is developed to shrink the EMI filter size while maintain a good efficiency. A sophisticated power management strategy that associates with phase shedding and adaptive phase angle control is also discussed to increase the efficient for the entire load range without compromising the EMI filter size. The method of current sampling is proposed for Ï /2 phase shift two Channel interleaving PFC and multi-channel adaptive phase angle shift PFC is proposed to accurately extract the average total current information. A noise free current sampling strategy is also proposed that adjusting the sampling edge according to duty cycle information. An isolated ZVS dual boost converter is proposed to be the DC/DC stage of the front-end converter. This PWM converter has similar performance as the LLC resonant converter. It has hold up time extension capability without compromising the normal operation efficiency. It can achieve ZVS for all the switches. The current limit and SR implementation is much easier than LLC. State plane method, which potentially can be extent to other complex topologies, is used to fully study this circuit. All the operation modes are understood through the state plane method. The best operation mode is discovered for the front end applications. Light load efficiency is improved by the proposed pulse skipping method to guarantee the ZVS operation meanwhile reduce the switching frequency. Current limit operation is also proposed to restrict a best operation mode by fully taking the advantage of digital control that precisely control the circuit under the over current condition. High efficiency high power density is achieved by new topology, innovative interleaving, and the sophisticated digital control method. / Master of Science