1 |
Density functional theory modelling of intrinsic and dopant-related defects in Ge and SiJanke, Colin January 2008 (has links)
This thesis covers the application of the local density approximation of density functional theory to a variety of related processes in germanium and silicon. Effort has been made to use calculated results to explain experimentally observed phenomena. The behaviour of vacancies and vacancy clusters in germanium has been studied as these are the dominant intrinsic defects in the material. Particular attention was paid to the annealing mechanisms for the divacancy as a precursor to the growth of the larger clusters, for which the electrical properties and formation energies have been studied. Some preliminary work is also presented on the germanium self-interstitial structure and migration paths. Attention was then turned to a selection of dopant-vacancy defects in both silicon and germanium. An effort was made to explain recent experimental observations in silicon through investigating a number of defects related to the arsenic E-centre. Following this, the properties of donor-vacancy clusters in germanium were studied, and comparison with the results calculated for silicon suggest a significant parallel between the behaviour of the defects and dopants in the two materials. Finally, extensive work was performed on the diffusion of phosphorus and boron in germanium. Diffusion of both dopants was studied via interstitial and vacancy mediated paths as well as by a correlated exchange path not involving any intrinsic defects. The results obtained confirmed current theories of the mechanisms involved in the diffusion of the two defects, while also expanding the knowledge of other paths and giving Fermi level dependences for the energy and mechanism for diffusion of the two defects. Boron diffusion was found to exhibit strong Meyer-Neldel rule effects, which are used to explain the unusually high diffusivity prefactors and energy barriers calculated from experimental measurements for this dopant.
|
2 |
TEM Study on the Evolution of Ge Nanocrystals in Si Oxide Matrix as a Function of Ge Concentration and the Si Reduction ProcessChew, Han Guan, Choi, Wee Kiong, Foo, Y.L., Chim, Wai Kin, Fitzgerald, Eugene A., Zheng, F., Samanta, S.K., Voon, Z.J., Seow, K.C. 01 1900 (has links)
Growth and evolution of germanium (Ge) nanocrystals embedded into a silicon oxide (SiO₂) system have been studied based on the Ge content of co-sputtered Ge-SiO₂ films using transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy. It was found that when the proportion of Ge relative to Ge oxide is 20%, TEM showed that annealing the samples at 800°C for 60 min resulted in the formation of a denuded region between the silicon/silicon oxide (Si/SiO₂) interface and a band of Ge nanocrystals towards the surface of the film. By introducing a 20nm thick thermal oxide barrier on top of the silicon (Si) substrate on which the film is deposited, no denuded region in the bulk of this sample is observed. It is proposed that this barrier is effective in reducing both Ge diffusion into the Si substrate and Si diffusion from the substrate into the film. Si diffusing from the Si substrate reduces the Ge oxide into Ge which can subsequently diffuse into the Si substrate. However, the oxide barrier is able to confine the Ge within the oxide matrix so that the denuded region in the bulk of the film cannot form. However the reduction in diffusion should be more significant for Ge as its diffusion coefficient is lower than Si due to its larger size. It is suggested that the denuded region consists of amorphous Ge diffusing towards the Si/SiO₂ interface. When the Ge content is increased to slightly more than 70%, TEM showed that Ge nanocrysyals formed after annealing at 800°C for only 30 min for samples with and without the oxide barrier. There is no denuded region between the Ge nanocrystals band and the Si/SiO₂ interface for both samples but it was observed that coarsening effects were more prominent in the film deposited on top of the oxide barrier. The reduction effect of Si on Ge oxide should not play a significant role in these samples as the Ge content is high. / Singapore-MIT Alliance (SMA)
|
3 |
High hole and electron mobilities using Strained Si/Strained Ge heterostructuresGupta, Saurabh, Lee, Minjoo L., Leitz, Christopher W., Fitzgerald, Eugene A. 01 1900 (has links)
PMOS and NMOS mobility characteristics of the dual channel (strained Si/strained Ge) heterostructure have been reviewed. It is shown that the dual channel heterostructure can provide substantially enhanced mobilities for both electrons and holes. However, germanium interdiffusion from the germanium rich buried layer into the underlying buffer layer could potentially reduce the hole mobility enhancements. / Singapore-MIT Alliance (SMA)
|
4 |
Control of complex structural geometry in optical fibre drawingLyytik�inen, Katja Johanna January 2004 (has links)
Drawing of standard telecommunication-type optical fibres has been optimised in terms of optical and physical properties. Specialty fibres, however, typically have more complex dopant profiles. Designs with high dopant concentrations and multidoping are common, making control of the fabrication process particularly important. In photonic crystal fibres (PCF) the inclusion of air-structures imposes a new challenge for the drawing process. The aim of this study is to gain profound insight into the behaviour of complex optical fibre structures during the final fabrication step, fibre drawing. Two types of optical fibre, namely conventional silica fibres and PCFs, were studied. Germanium and fluorine diffusion during drawing was studied experimentally and a numerical analysis was performed of the effects of drawing parameters on diffusion. An experimental study of geometry control of PCFs during drawing was conducted with emphasis given to the control of hole size. The effects of the various drawing parameters and their suitability for controlling the air-structure was studied. The effect of air-structures on heat transfer in PCFs was studied using computational fluid dynamics techniques. Both germanium and fluorine were found to diffuse at high temperature and low draw speed. A diffusion coefficent for germanium was determined and simulations showed that most diffusion occurred in the neck-down region. Draw temperature and preform feed rate had a comparable effect on diffusion. The hole size in PCFs was shown to depend on the draw temperature, preform feed rate and the preform internal pressure. Pressure was shown to be the most promising parameter for on-line control of the hole size. Heat transfer simulations showed that the air-structure had a significant effect on the temperature profile of the structure. It was also shown that the preform heating time was either increased or reduced compared to a solid structure and depended on the air-fraction.
|
5 |
Control of complex structural geometry in optical fibre drawingLyytik�inen, Katja Johanna January 2004 (has links)
Drawing of standard telecommunication-type optical fibres has been optimised in terms of optical and physical properties. Specialty fibres, however, typically have more complex dopant profiles. Designs with high dopant concentrations and multidoping are common, making control of the fabrication process particularly important. In photonic crystal fibres (PCF) the inclusion of air-structures imposes a new challenge for the drawing process. The aim of this study is to gain profound insight into the behaviour of complex optical fibre structures during the final fabrication step, fibre drawing. Two types of optical fibre, namely conventional silica fibres and PCFs, were studied. Germanium and fluorine diffusion during drawing was studied experimentally and a numerical analysis was performed of the effects of drawing parameters on diffusion. An experimental study of geometry control of PCFs during drawing was conducted with emphasis given to the control of hole size. The effects of the various drawing parameters and their suitability for controlling the air-structure was studied. The effect of air-structures on heat transfer in PCFs was studied using computational fluid dynamics techniques. Both germanium and fluorine were found to diffuse at high temperature and low draw speed. A diffusion coefficent for germanium was determined and simulations showed that most diffusion occurred in the neck-down region. Draw temperature and preform feed rate had a comparable effect on diffusion. The hole size in PCFs was shown to depend on the draw temperature, preform feed rate and the preform internal pressure. Pressure was shown to be the most promising parameter for on-line control of the hole size. Heat transfer simulations showed that the air-structure had a significant effect on the temperature profile of the structure. It was also shown that the preform heating time was either increased or reduced compared to a solid structure and depended on the air-fraction.
|
Page generated in 0.0641 seconds