This thesis deals with the preparation of materials for use in separation science and their surface modification by grafting. The overall aim is the preparation of diverse materials by combination of a set of developed tools. Included in the thesis is the synthesis of monolithic media using non-traditional crosslinkers, the characterization of their porous properties and initial testing in reversed-phase chromatographic separation of proteins. The preparation of a library of short polymer chains, telomers, with varied functionality and their characterization is reported. Included in the characterization is the gradient polymer elution chromatography of selected telomers on a monolithic column in capillary format. The technique shows promise as a tool for monitoring of polymerization processes and for the separation of telomers with similar size but different functionalities or characteristics. Finally, the combination of polymeric support materials and the prepared telomer library is used in surface modification. Surface modification is performed onto activated surfaces via a “grafting to” approach. One example is shown, the surface modification of epoxy-modified divinylbenzene particles by attachment of telomer chains introducing ion-exchange functionality. The material is tested for the separation of proteins, in ion-exchange chromatography mode.

No description available.

Thesis (MSc)--Stellenbosch University, 2004. / ENGLISH ABSTRACT: In the ongomg search for better and faster ways to characterize complex polymer systems, it is often necessary to couple different analytical techniques in order to obtain information on more than one distributed property. In this study, the coupling of chromatography and spectroscopy to atomic force microscopy (AFM) was attempted for the first time, and thus the term "LC-FTIR-AFM" was coined. This new hyphenated technique combines the separation power of liquid chromatography (LC) and the ability of infrared spectroscopy (IR) to identify almost any organic compound, with the AFM's ability to be used for thermal analysis of individual phases in polymer mixtures. The first two steps of this new technique comprise (i) the separation of compounds in a mixture via gradient polymer elution chromatography (GPEC) and (ii) the identification of each compound by means of LC-FTIR analysis. In the final step, LC-FTIR analysis is coupled to AFM through the use of the LC-FTIR interface. A number of polymer mixtures were analysed by means of the novel technique that was developed, in order to establish its validity and value as a characterization technique of the future. The influence of fllm thickness and molar mass on the thermal parameters of individual components in mixtures, measured by this technique, were also investigated. This technique adds a new dimension to conventional thermal analysis methods, since it allows the thermal transitions of individual polymer phases in multiphase polymers to be resolved directly after separation and identification. / AFRIKAANSE OPSOMMING: In die voortdurende soektog na beter en vinniger maniere om komplekse polimeersisteme te karakteriseer, is dit soms nodig om verskillende analitiese tegnieke met mekaar te koppel ten einde inligting aangaande twee of meer verspreide eienskappe te bekom. Gedurende hierdie studie is daar gepoog om chromatografie en spektroskopie met atoominteraksie-mikroskopie (atomic force microscopy, AFM) te koppel. Gevolglik het die term "LC-FTIR-AFM" ontstaan. Hierdie nuwe koppelingstegniek kombineer die kragtige skeidingspotensiaal van vloeistofchromatografie en die vermoë van infrarooispektroskopie om byna enige organiese verbinding positief te identifiseer, met die atoominteraksie-mikroskoop se potensiaal om as 'n termiese analise metode vir individuele fases in polimeermengsels te dien. Die eerste twee stappe van die tegniek behels (i) die skeiding van verbindings in 'n mengsel deur middel van gradient-hoë-druk-vloeistofchromatografie en (ii) die identifisering van afsonderlike verbindings deur vloeistofchromatografie gekoppel aan infrarooispektroskopie. Gedurende die finale stap word vloeistofchromatografie en infrarooispektroskopie aan die atoominteraksie-mikroskoop gekoppel deur gebruik te maak van die LC-FTIR koppelingsapparaat. 'n Aantal polimeermengsels is geanaliseer deur die nuwe tegniek hierbo beskryf, ten einde die geldigheid en waarde daarvan as 'n analitiese metode vir die toekoms vas te stel. Die invloed van film diktes en molekulêre massa op die termiese oorgange van individuele komponente in mengsels, soos gemeet deur hierdie metode, is ook ondersoek. Hierdie tegniek voeg 'n nuwe dimensie tot konvensionele termiese analise metodes deurdat dit die bepaling van termiese oorgange van individuele polimeerfases III multifase polimere, direk na afloop van skeiding en identifikasie moontlik maak.