The objective of this thesis is to successfully design, fabricate, and characterize an optimum metal-insulator-metal diode that can be used as a fast switching diode in various applications such as solar energy conversion. The improvements of this type of diode will result in rectification of a wider spectrum of AC signals to usable electricity. In this project, several proposed designs of MIM diodes were successfully fabricated and characterized. Pt-Al2O3-Al metal-insulator-metal diode was fabricated to have high asymmetry in I-V curve. Additionally, in an attempt to study the effect of material properties on MIM diode???s performance, four different combinations of MIIIIM diode were compared and discussed. Many processes were involved in the fabrication of these diodes such as E-beam evaporation, photolithography, reactive ion etching RIE, and Atomic Layer Deposition (ALD) technique. The fabricated tunneling diodes are intended to operate in the GHz regime and can also operate at higher frequencies (THz) by changing and scaling the dimensions. In addition to MIM diode work, this project attempted to engineer the contrast curve of polystyrene as a negative resist used for E-beam lithography using multi layer resist stack. If the resist stack has a very high contrast and its sensitivity differs between the various layers, it can be ideal for the fabrication of multi-level zone-plate/Fresnel lens.

The thesis presented is an effort to gather all possible information of one particular type of common paint defect the seed defect, from gray scale images of highly specular painted surface. The proposed approach in the thesis utilizes a white light source to illuminate the surface and utilizes a camera to capture its gray scale image at different diffused angles. While attempting to explain the physics of highlight formation in terms of location on the surface of a seed defect, the thesis also extends to utilize this information from gray scale images to accurately predict the parameters of seed defects including the height, size and position in real time. Since the primary highlight in a gray scale image is more defined, contrary to the past researches on diffuse angle images that use both primary / seed highlight and mirror highlight to estimate height of the seed, this thesis formulates a theory of highlight translation and estimates the height of seed based on primary / seed highlight. The other common type of surface defect - crater defect, is also addressed in the thesis.

This study investigates use of echocardiography to assess the related issues about whether the heart function of a subject examined is normal or not. Two-dimensional echocardiography can make the heart inspection, and provide very detailed informations for each part of the cardiovascular structures with a high degree of accuracy. Many studies indicated that the systolic and diastolic function with left ventricle of heart disease in patients was poorer than those of normal patients. Therefore it is of interest to study the systolic and diastolic function for examining whether there are heart problems. In this work, the data is the gray-scale values of left ventricular static ultrasound images. The gray-scale differences between systolic and diastolic period, are used to assess whether the patient suffers from the heart diseases or not. Here, we use factor analysis to simplify and select the crucial factors, namely the function in different area of the left ventricle. Finally, linear and quadratic discriminant analyses are used to distinguish the normal and the abnormal subjects.

Due to the association of heart diseases and the patterns of the diastoles and systoles of heart in left ventricle, we analyze and classify the data gathered form Kaohsiung Veterans General Hospital by using the cardiology ultrasound images. We make use of the differences between the gray-scale values of diastoles and systoles in left ventricle to evaluate the function of heart. Following Chen (2011) and Kao (2011), we modified the way about the reduction and alignment of the image data. We also add some more subjects into the study. We treat images in two manners, saving the parts of concern. Since the ultrasound image after transformation to data form is expressed as a high-dimensional matrix, the principal component analysis is adapted to retain the important factors and reduce the dimensions. In this work, we compare the loadings calculated by the usual principal and sparse principal component analysis, then the factor scores are used to carry out the discriminant analysis and discuss the accuracy of classification. By the statistical methods in this work, the accuracy, sensitivity and specificity of the original classifications are over 80% and the cross validations are over 60%.

Non-invasive physical examination helps to make disease diagnosis with minimum injury to the body. Cardiology ultrasound is a non-invasive examination which can be used as a auxiliary tool for diagnose cardiac structure abnormalities. With more understanding of heart diseases, it has been recognized that heart failures are closely related to left ventricular systolic and diastolic function. Following Chen (2011) and Kao (2011), we study association of heart diseases with the change of gray-scale values in the cardiology ultrasound images of left ventricular systolic and diastolic. Since data obtained from ultrasound image is of matrix type with high dimensions, following the method proposed by Chen (2011) and Kao (2011), factor scores obtained from factor analysis are used as a basis for classification. We take the factor scores of normal subjects to establish the bench mark and calculate the Mahalanobis distance of each abnormal subject with the model established by the data from normal group. Later based on this distance to the normal group, cardiac function of the subject is distinguished as normal or not. In order to improve the accuracy of the classification, influential points which may cause inaccurate covariance matrix estimate on the subjects in normal group are identified. Based on concepts from optimal designs theory, some criteria are established for screening out the influential points.

Prior to 1960's, the fingerprint analysis was carried out manually by human experts and for forensic purposes only. Automated fingerprint identification systems (AFIS) have been developed during the last 50 years. The success of AFIS resulted in that its use expanded beyond forensic applications and became common also in civilian applications. Mobile phones and computers equipped with fingerprint sensing devices for fingerprint-based user identification are common today. Despite the intense development efforts, a major problem in automatic fingerprint identification is to acquire reliable matching features from fingerprint images with poor quality. Images where the fingerprint pattern is heavily degraded usually inhibit the performance of an AFIS system. The performance of AFIS systems is also reduced when matching fingerprints of individuals with large age variations. This doctoral thesis presents contributions within the field of fingerprint image enhancement, segmentation and minutiae detection. The reliability of the extracted fingerprint features is highly dependent on the quality of the obtained fingerprints. Unfortunately, it is not always possible to have access to high quality fingerprints. Therefore, prior to the feature extraction, an enhancement of the quality of fingerprints and a segmentation are performed. The segmentation separates the fingerprint pattern from the background and thus limits possible sources of error due to, for instance, feature outliers. Most enhancement and segmentation techniques are data-driven and therefore based on certain features extracted from the low quality fingerprints at hand. Hence, different types of processing, such as directional filtering, are employed for the enhancement. This thesis contributes by proposing new research both for improving fingerprint matching and for the required pre-processing that improves the extraction of features to be used in fingerprint matching systems. In particular, the majority of enhancement and segmentation methods proposed herein are adaptive to the characteristics of each fingerprint image. Thus, the methods are insensitive towards sensor and fingerprint variability. Furthermore, introduction of the higher order statistics (kurtosis) for fingerprint segmentation is presented. Segmentation of the fingerprint image reduces the computational load by excluding background regions of the fingerprint image from being further processed. Also using a neural network to obtain a more robust minutiae detector with a patch rejection mechanism for speeding up the minutiae detection is presented in this thesis.

Most of the cardiac structural abnormalities will be examined by echocardiography. With more understanding of heart diseases, it is commonly recognized that heart failures are closely related to left ventricular systolic and diastolic functions. This work discusses the association between gray-scale differences and the risk of heart disease from the changes in left ventricular systole and diastole of ultrasound image. Owing to the large dimension of data matrix, following Chen (2011), we also simplify the influence factors by factor analysis and calculate factor scores to present the characteristics of subjects. Two kinds of classification criteria are used in this work, namely logistic model with distance indicator and discriminant function. According to Guo et al. (2001), we calculate the Mahalanobis distance from each subject to the center of normal and abnormal group, then use logistic model to fit the distances for classification later. This is called logistic model with distance indicator. For the discriminant analysis, the regularized method by Friedman (1989) for estimation of covariance matrix is used, which is more flexible and can improve the covariance matrix estimates when the sample size is small. As far as the cut-point of ROC curve, following the approach as in Hanley et al. (1982), we find the most appropriate cut-point which has good performances for both sensitivity and specificity under the same classification criteria. Then the regularized method and the cut-point of ROC curve are combined to be a new classification criterion. The results under the new classification criterion are presented to classify normal and abnormal groups.

The development and application of portable LCD (Liquid crystal display) technology is the main trend on the market. The goal of this study is to fabricate a compound optical film, and we focus on the design and fabrication of a new type backlight module for side-LED (Light emitting diode) display. The optical efficiency can be improved via the compound optical film. The profile of optical film was determined using commercial optical software, FRED. The mold with multi aspect ratio and multi fill-factor microlens array by LIGA-like process (Lithographie galvanoformung abformung) was produced using THB-126N negative photoresist and AZ-4620 positive photoresist. The study presents many innovative processes, such as the homemade gray scale mask, and multi-step electroforming method, which both produces the microlens array with variable size and aspect ratio. In addition, the embedded micro-void caused light guide and diffusion under the quantitative control during the PDMS (Polydimethylsiloxane) optical film fabrication. The compound optical film with embedded micro-voids, multi aspect ratio and variable size microlens array can be fabricated quickly without substrate. Then the optical properties were analyzed by BM-7A to characterize the luminance, uniformity and optical efficiency.

A transição do sistema radiográfico convencional para os sistemas radiográficos digitais, ao longo de vinte anos, tem transformado as salas de laudos nos Serviços de Diagnóstico por Imagem tanto na Medicina quanto na Medicina Veterinária. Atualmente, com a introdução do sistema radiográfico computadorizado na rotina de alguns hospitais e laboratório de imagem, o uso das ferramentas do pós-processamento tem se tornado mais freqüente. Diante das vantagens e desvantagens destas ferramentas e da escassez de trabalhos a cerca dos filtros utilizados em imagens radiográficas digitais, o objetivo deste trabalho foi testar o uso dos filtros convencional, realce de borda e invertido, assim como a associação deles na detecção dos padrões pulmonares de cães e gatos. Foram selecionados 40 exames radiográficos do tórax de cães e gatos contendo as três projeções de eleição. Três observadores com diferentes graus de experiência e familiaridade com o sistema radiográfico computadorizado analisaram os filtros individualmente e depois em associação na detecção geral dos padrões pulmanres e individualmente. Obteve-se melhores valores de sensibilidade e especificidade, em geral, quando os observadores experientes utilizaram os três filtros em associação e, para o iniciante, os melhores resultados da sensibilidade e especificidade, em geral, foram no filtro convencional. Os resultados deste trabalho permitiram concluir que houve diferença estatística entre os observadores com distintos graus de experiência e familiaridade com o sistema digital. E que o uso em associação dos filtros pode incrementar o desempenho do radiologista na avaliação radiográfica do parênquima pulmonar. / The transition of the conventional radiographic system to the digital one has been transforming the radiographic routine human and veterinary medicine over the last twenty years. Currently, the introduction of the computed radiography system in some hospitals and imaging services has increased the use of post processing tools. Considering the advantages and disadvantages of these tools and the lack of knowledge about the filters used in digital radiographic images, the aim of this study was to test efficacy of the standard, edge enhancement and gray scale reversed filters and their association to detect pulmonary patterns of cats and dogs. This work selected forty canine and feline sets of thoracic radiographs, including three projections. Three different observers with different degrees of experience and familiarity with the computed radiographic system analyzed the filters individually and then associated in order to detect pulmonary patterns. The best results in sensibility and specificity were related to the more experienced observers using the three associated filters. However, for the beginner, the best sensibility and specificity results was reached with the use of the standard filter in general results. In conclusion were statistical differences between more experienced and familiarized observers with the digital system and the use of filters can increase the radiologist performance when evaluating the pulmonary patterns on the radiography.

Neste trabalho são apresentadas a implementação e avaliação da aplicação do processador gráfico TMS34010. O objetivo foi o desenvolvimento de um sistema para visualização de imagens com este processador, a ser integrado ao Tomógrafo por Ressonância Magnética, do Departamento de Física e Ciência dos Materiais. A fim de avaliar tanto os aspectos do \"hardware\" quanto às capacidades do processador, foram desenvolvidos dois sistemas: um com 16 cores, e outro com 256 níveis de cinza, ambos contendo uma interface serial para interligação de um \"mouse\" convencional para microcomputadores do tipo PC-AT. Através destes sistemas foram avaliados recursos tais como \"pan\" horizontal e vertical, divisão da tela ao meio, vídeo no modo entrelaçado, transparência, operações lógicas, e instruções de transferência de blocos de \"pixels\" / This work describes the implementation and evaluation of a TMS34010 graphics processor based system. The system was developed to be used for the visualization of Magnetic Resonance Images in the MR tomography system under development in our Department. To evaluate the design and the performance of the processor, two systems were developed: one capable to show pictures with 16 simultaneous colors, and a second one able to display pictures with a gray scale of 256 levels. Both systems are equipped with a serial interface supporting a conventional mouse as used for PC compatibles. The hardware developed was used to evaluate implementations of resources such as horizontal and vertical PAN, screen division, interlaced video, transparency, logic operations and pixels block transfer routines