Global ETD Search

1	An Investigation into the Mechanisms of Formation of the Hard Zone in FSW X65 Allred, Jacob D. 13 November 2013 (has links) (PDF) Friction stir welding (FSW) of HSLA steel commonly produces a hard zone (HZ) on the advancing side (AS) of the weld. Despite its detrimental effects on weld toughness, the mechanisms of its formation have not been thoroughly investigated and are not well understood. This paper investigates the various mechanisms in FSW believed to affect the weld HZ, namely: strain, strain-rate, peak temperature and cooling rate. Gleeble tests indicate that strain and strain rate have negligible effects on weld HZ with cooling rate and peak temperature as dominant effects. Jominy tests resulted in cooling rate having 270% greater influence than peak temperature on the formation of lath ferrite microstructures similar to what is observed in the HZ of FSW X65. Comparing weld HZ microstructures to Jominy tests, it is estimated that cooling rates on the AS of the weld are at least 150°C/s higher than the retreating side. Reducing the cooling rate on the AS will likely lead to an improved microstructure at the weld HZ. hard zone peak temperature cooling rate strain strain-rate lath ferrite microstructure FSW HSLA X65 Mechanical Engineering
2	Study on the Fracture Toughness of Friction Stir Welded API X80 Tribe, Allan M. 06 August 2012 (has links) (PDF) High strength low alloy (HSLA) steels have been developed to simultaneously have high yield strength and high fracture toughness. However, in practical applications steel must be welded. Traditional arc welding has proven detrimental to the fracture toughness of HSLA steels. Friction stir welding has recently shown mixed results in welding HSLA steels. The range of welding parameters used in these recent studies however has been very limited. With only a few welding parameters tested, the effect of spindle speed, travel speed, and heat input on the fracture toughness of friction stir welded HSLA steel remains unknown. To understand how the friction stir welding process parameters affect fracture toughness, double sided welds in API X80 were performed and analyzed. Results show that at room temperature friction stir welded API X80 exceeded industry minimum fracture toughness requirements in both the API Standard 1104 and DNV-OS-F101 by 143% and 62%, respectively. The process parameters of spindle speed and HI have been shown to effectively control the fracture toughness of the stir zone. Relationships have been established that show that fracture toughness increased by 85% when spindle speed decreased by 59% and heat input decreased by 46%. Allan Tribe friction stir welding HSLA steel API X80 fracture toughness CTOD J1c microstructure polygonal ferrite bainite lath packet heat input hard zone hardness Mechanical Engineering

Search results

An Investigation into the Mechanisms of Formation of the Hard Zone in FSW X65

Study on the Fracture Toughness of Friction Stir Welded API X80